From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org,
Andrew Morton <akpm@linux-foundation.org>,
David Brownell <dbrownell@users.sourceforge.net>,
linux-kernel@vger.kernel.org,
spi-devel-general@lists.sourceforge.net
Subject: [PATCH 6/9] spi_mpc83xx: Split mpc83xx_spi_work() into two routines
Date: Fri, 1 May 2009 03:48:29 +0400 [thread overview]
Message-ID: <20090430234829.GF7901@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090430234739.GA27709@oksana.dev.rtsoft.ru>
mpc83xx_spi_work() is quite large, with up to five indentation
levels and is quite difficult to read.
So, split the function in two parts:
1. mpc83xx_spi_work() now only traverse queued spi messages;
2. mpc83xx_spi_do_one_msg() only manages single messages.
There should be no functional changes.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/spi/spi_mpc83xx.c | 115 +++++++++++++++++++++++---------------------
1 files changed, 60 insertions(+), 55 deletions(-)
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 40f7448..50112a5 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -350,71 +350,76 @@ static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
return mpc83xx_spi->count;
}
-static void mpc83xx_spi_work(struct work_struct *work)
+static void mpc83xx_spi_do_one_msg(struct spi_message *m)
{
- struct mpc83xx_spi *mpc83xx_spi =
- container_of(work, struct mpc83xx_spi, work);
-
- spin_lock_irq(&mpc83xx_spi->lock);
- mpc83xx_spi->busy = 1;
- while (!list_empty(&mpc83xx_spi->queue)) {
- struct spi_message *m;
- struct spi_device *spi;
- struct spi_transfer *t = NULL;
- unsigned cs_change;
- int status, nsecs = 50;
-
- m = container_of(mpc83xx_spi->queue.next,
- struct spi_message, queue);
- list_del_init(&m->queue);
- spin_unlock_irq(&mpc83xx_spi->lock);
-
- spi = m->spi;
- cs_change = 1;
- status = 0;
- list_for_each_entry(t, &m->transfers, transfer_list) {
- if (t->bits_per_word || t->speed_hz) {
- /* Don't allow changes if CS is active */
- status = -EINVAL;
-
- if (cs_change)
- status = mpc83xx_spi_setup_transfer(spi, t);
- if (status < 0)
- break;
- }
-
- if (cs_change) {
- mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
- ndelay(nsecs);
- }
- cs_change = t->cs_change;
- if (t->len)
- status = mpc83xx_spi_bufs(spi, t);
- if (status) {
- status = -EMSGSIZE;
+ struct spi_device *spi = m->spi;
+ struct spi_transfer *t;
+ unsigned int cs_change;
+ const int nsecs = 50;
+ int status;
+
+ cs_change = 1;
+ status = 0;
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->bits_per_word || t->speed_hz) {
+ /* Don't allow changes if CS is active */
+ status = -EINVAL;
+
+ if (cs_change)
+ status = mpc83xx_spi_setup_transfer(spi, t);
+ if (status < 0)
break;
- }
- m->actual_length += t->len;
-
- if (t->delay_usecs)
- udelay(t->delay_usecs);
+ }
- if (cs_change) {
- ndelay(nsecs);
- mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(nsecs);
- }
+ if (cs_change) {
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
+ ndelay(nsecs);
+ }
+ cs_change = t->cs_change;
+ if (t->len)
+ status = mpc83xx_spi_bufs(spi, t);
+ if (status) {
+ status = -EMSGSIZE;
+ break;
}
+ m->actual_length += t->len;
- m->status = status;
- m->complete(m->context);
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
- if (status || !cs_change) {
+ if (cs_change) {
ndelay(nsecs);
mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
}
+ }
+
+ m->status = status;
+ m->complete(m->context);
+
+ if (status || !cs_change) {
+ ndelay(nsecs);
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ }
+
+ mpc83xx_spi_setup_transfer(spi, NULL);
+}
+
+static void mpc83xx_spi_work(struct work_struct *work)
+{
+ struct mpc83xx_spi *mpc83xx_spi = container_of(work, struct mpc83xx_spi,
+ work);
+
+ spin_lock_irq(&mpc83xx_spi->lock);
+ mpc83xx_spi->busy = 1;
+ while (!list_empty(&mpc83xx_spi->queue)) {
+ struct spi_message *m = container_of(mpc83xx_spi->queue.next,
+ struct spi_message, queue);
+
+ list_del_init(&m->queue);
+ spin_unlock_irq(&mpc83xx_spi->lock);
- mpc83xx_spi_setup_transfer(spi, NULL);
+ mpc83xx_spi_do_one_msg(m);
spin_lock_irq(&mpc83xx_spi->lock);
}
--
1.6.2.2
next prev parent reply other threads:[~2009-04-30 23:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-30 23:47 [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Anton Vorontsov
2009-04-30 23:48 ` [PATCH 1/9] spi_mpc83xx: Handles other Freescale processors Anton Vorontsov
2009-04-30 23:48 ` [PATCH 2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message Anton Vorontsov
2009-04-30 23:48 ` [PATCH 3/9] spi_mpc83xx: Add small delay after asserting chip-select line Anton Vorontsov
2009-04-30 23:48 ` [PATCH 4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards Anton Vorontsov
2009-04-30 23:48 ` [PATCH 5/9] spi_mpc83xx: Fix checkpatch issues Anton Vorontsov
2009-04-30 23:48 ` Anton Vorontsov [this message]
2009-04-30 23:48 ` [PATCH 7/9] spi_mpc83xx: Remove dead code Anton Vorontsov
2009-04-30 23:48 ` [PATCH 8/9] spi_mpc83xx: Rename spi_83xx.c to spi_8xxx.c Anton Vorontsov
2009-04-30 23:48 ` [PATCH 9/9] spi_mpc8xxx: s/83xx/8xxx/g Anton Vorontsov
2009-05-01 21:42 ` [spi-devel-general] " Grant Likely
2009-05-04 20:53 ` Andrew Morton
2009-05-04 23:36 ` Anton Vorontsov
2009-05-04 20:55 ` [PATCH 0/9] Some work for spi_mpc83xx driver, spi-mmc support for MPC8610HPCD Andrew Morton
2009-05-04 23:36 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090430234829.GF7901@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=akpm@linux-foundation.org \
--cc=dbrownell@users.sourceforge.net \
--cc=galak@kernel.crashing.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).