linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Wolfram Sang <wsa@pengutronix.de>
Cc: linuxppc-dev@ozlabs.org, Eric Millbrandt <emillbrandt@dekaresearch.com>
Subject: Re: mpc5200 fec error
Date: Tue, 19 May 2009 22:36:45 +0200	[thread overview]
Message-ID: <20090519203645.GW19843@pengutronix.de> (raw)
In-Reply-To: <A88094362DE0AE49A118AB9B4EB3612403F9DEB6@dekaexchange.deka.local>

Wolfram, have you seen this mail? You recently tested -rt on 2.6.29,
right? Did you only test that on the customer hardware or also on the
phyCORE-MPC5200B?

rsc

On Mon, May 18, 2009 at 01:36:27PM -0400, Eric Millbrandt wrote:
> Hello all,
> 
>  
> 
> I am testing a 2.6.29.3 (with preempt_rt patches) kernel on a phytec pcm030 and
> am getting a kernel hang when testing the fec Ethernet controller.  The error
> only occurs when running the preempt-patched kernel, an unmodified kernel works
> fine.  Is anyone out there using preempt_rt on an MPC5200 successfully?
> 
>  
> 
> Eric
> 
>  
> 
> root@rudolph-ui:/root> iperf -c linux-5200bdevl01 -P 2 -i 1 -p 5001 -f k -t 600
> 
> ------------------------------------------------------------
> 
> Client connecting to linux-5200bdevl01, TCP port 5001
> 
> TCP window size: 36.2 KByte (default)
> 
> ------------------------------------------------------------
> 
> [  4] local 10.1.4.88 port 37872 connected with 10.1.5.234 port 5001
> 
> [  3] local 10.1.4.88 port 37871 connected with 10.1.5.234 port 5001
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  3]  0.0- 1.0 sec  3824 KBytes  31326 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  4]  0.0- 1.0 sec  3656 KBytes  29950 Kbits/sec
> 
> [SUM]  0.0- 1.0 sec  7480 KBytes  61276 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  4]  1.0- 2.0 sec  3760 KBytes  30802 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  3]  1.0- 2.0 sec  3752 KBytes  30736 Kbits/sec
> 
> [SUM]  1.0- 2.0 sec  7512 KBytes  61538 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  4]  2.0- 3.0 sec  3728 KBytes  30540 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  3]  2.0- 3.0 sec  3816 KBytes  31261 Kbits/sec
> 
> [SUM]  2.0- 3.0 sec  7544 KBytes  61800 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  3]  3.0- 4.0 sec  3712 KBytes  30409 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  4]  3.0- 4.0 sec  3824 KBytes  31326 Kbits/sec
> 
> [SUM]  3.0- 4.0 sec  7536 KBytes  61735 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  3]  4.0- 5.0 sec  3968 KBytes  32506 Kbits/sec
> 
> [ ID] Interval       Transfer     Bandwidth
> 
> [  4]  4.0- 5.0 sec  3624 KBytes  29688 Kbits/sec
> 
> [SUM]  4.0- 5.0 sec  7592 KBytes  62194 Kbits/sec
> 
> [ 5761.999175] net eth0: transmit queue overrun
> 
> [ 5762.003591] net eth0: transmit queue overrun
> 
> [ 5762.007948] net eth0: transmit queue overrun
> 
> [ 5762.012302] net eth0: transmit queue overrun
> 
> [ 5762.016658] net eth0: transmit queue overrun
> 
> [ 5762.021013] net eth0: transmit queue overrun
> 
> [ 5762.025381] net eth0: transmit queue overrun
> 
> [ 5762.029735] net eth0: transmit queue overrun
> 
> [ 5762.034090] net eth0: transmit queue overrun
> 
> [ 5762.038445] net eth0: transmit queue overrun
> 
> [ 5767.000928] net eth0: transmit queue overrun
> 
> [ 5767.005278] net eth0: transmit queue overrun
> 
> [ 5767.009634] net eth0: transmit queue overrun
> 
> [ 5767.013990] net eth0: transmit queue overrun
> 
> [ 5767.018345] net eth0: transmit queue overrun
> 
> [ 5767.022701] net eth0: transmit queue overrun
> 
> ?.
> 
> 
> 
> _____________________________________________________________________________
> 
> This e-mail and the information, including any attachments, it contains are
> intended to be a confidential communication only to the person or entity to
> whom it is addressed and may contain information that is privileged. If the
> reader of this message is not the intended recipient, you are hereby notified
> that any dissemination, distribution or copying of this communication is
> strictly prohibited. If you have received this communication in error, please
> immediately notify the sender and destroy the original message.
> 
> Thank you.        
> 
> 
> 
> Please consider the environment before printing this email.
> 

> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

  reply	other threads:[~2009-05-19 20:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-18 17:36 mpc5200 fec error Eric Millbrandt
2009-05-19 20:36 ` Robert Schwebel [this message]
2009-05-19 20:57   ` Wolfram Sang
2009-05-19 22:21     ` Eric Millbrandt
2009-05-19 23:36       ` Grant Likely
2009-05-20  6:42         ` Wolfram Sang
2009-05-20 13:42           ` Eric Millbrandt
2009-05-20 15:14             ` Jon Smirl
2009-05-20 15:28               ` Eric Millbrandt
2009-05-20 15:29                 ` Jon Smirl
2009-05-20 16:41                   ` Eric Millbrandt
2009-05-20 16:49                     ` Grant Likely
2009-05-20 17:26                       ` Eric Millbrandt
2009-05-20 17:41                         ` Grant Likely
2009-05-20 17:57                       ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090519203645.GW19843@pengutronix.de \
    --to=r.schwebel@pengutronix.de \
    --cc=emillbrandt@dekaresearch.com \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=wsa@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).