From: Jon Smirl <jonsmirl@gmail.com>
To: grant.likely@secretlab.ca, linuxppc-dev@ozlabs.org,
alsa-devel@alsa-project.org, broonie@sirena.org.uk
Subject: [PATCH V2 4/9] Add a few more mpc5200 PSC defines
Date: Sat, 23 May 2009 19:13:03 -0400 [thread overview]
Message-ID: <20090523231303.17919.35877.stgit@terra> (raw)
In-Reply-To: <20090523231148.17919.46103.stgit@terra>
Add a few more mpc5200 PSC defines. More bit fields defines for mpc5200 PSC registers. This patch is going in via Grant's tree.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
---
0 files changed, 0 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index a218da6..fb84120 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -28,6 +28,10 @@
#define MPC52xx_PSC_MAXNUM 6
/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_UNEX_RX 0x0001
+#define MPC52xx_PSC_SR_DATA_VAL 0x0002
+#define MPC52xx_PSC_SR_DATA_OVR 0x0004
+#define MPC52xx_PSC_SR_CMDSEND 0x0008
#define MPC52xx_PSC_SR_CDE 0x0080
#define MPC52xx_PSC_SR_RXRDY 0x0100
#define MPC52xx_PSC_SR_RXFULL 0x0200
@@ -61,6 +65,12 @@
#define MPC52xx_PSC_RXTX_FIFO_EMPTY 0x0001
/* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_UNEX_RX_SLOT 0x0001
+#define MPC52xx_PSC_IMR_DATA_VALID 0x0002
+#define MPC52xx_PSC_IMR_DATA_OVR 0x0004
+#define MPC52xx_PSC_IMR_CMD_SEND 0x0008
+#define MPC52xx_PSC_IMR_ERROR 0x0040
+#define MPC52xx_PSC_IMR_DEOF 0x0080
#define MPC52xx_PSC_IMR_TXRDY 0x0100
#define MPC52xx_PSC_IMR_RXRDY 0x0200
#define MPC52xx_PSC_IMR_DB 0x0400
@@ -117,6 +127,7 @@
#define MPC52xx_PSC_SICR_SIM_FIR (0x6 << 24)
#define MPC52xx_PSC_SICR_SIM_CODEC_24 (0x7 << 24)
#define MPC52xx_PSC_SICR_SIM_CODEC_32 (0xf << 24)
+#define MPC52xx_PSC_SICR_AWR (1 << 30)
#define MPC52xx_PSC_SICR_GENCLK (1 << 23)
#define MPC52xx_PSC_SICR_I2S (1 << 22)
#define MPC52xx_PSC_SICR_CLKPOL (1 << 21)
next prev parent reply other threads:[~2009-05-23 23:21 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-23 23:12 [PATCH V2 0/9] mpc5200 audio rework for AC97 Jon Smirl
2009-05-23 23:12 ` [PATCH V2 1/9] Register the wm9712 DAIs on module load Jon Smirl
2009-05-24 11:11 ` [alsa-devel] " Mark Brown
2009-05-24 15:28 ` Jon Smirl
2009-05-24 15:32 ` Jon Smirl
2009-05-24 19:14 ` Mark Brown
2009-05-23 23:12 ` [PATCH V2 2/9] Basic split of mpc5200 DMA code out from mpc5200_psc_i2s Jon Smirl
2009-05-24 14:11 ` Grant Likely
2009-05-23 23:13 ` [PATCH V2 3/9] Rename the PSC functions to DMA Jon Smirl
2009-05-24 11:15 ` [alsa-devel] " Mark Brown
2009-05-24 14:12 ` Grant Likely
2009-05-23 23:13 ` Jon Smirl [this message]
2009-05-24 14:13 ` [PATCH V2 4/9] Add a few more mpc5200 PSC defines Grant Likely
2009-05-24 18:00 ` Mark Brown
2009-05-24 18:19 ` Grant Likely
2009-05-24 18:32 ` [alsa-devel] " Mark Brown
2009-05-23 23:13 ` [PATCH V2 5/9] Main rewite of the mpc5200 audio DMA code Jon Smirl
2009-05-24 11:26 ` [alsa-devel] " Mark Brown
2009-05-24 18:55 ` Wolfram Sang
2009-05-24 20:10 ` Jon Smirl
2009-05-24 20:35 ` Wolfram Sang
2009-05-25 7:56 ` Juergen Beisert
2009-05-25 10:51 ` Mark Brown
2009-05-23 23:13 ` [PATCH V2 6/9] Codec for STAC9766 used on the Efika Jon Smirl
2009-05-24 11:46 ` [alsa-devel] " Mark Brown
2009-05-23 23:13 ` [PATCH V2 7/9] AC97 driver for mpc5200 Jon Smirl
2009-05-24 12:10 ` [alsa-devel] " Mark Brown
2009-05-23 23:13 ` [PATCH V2 8/9] Fabric bindings for STAC9766 on the Efika Jon Smirl
2009-05-24 12:12 ` [alsa-devel] " Mark Brown
2009-05-23 23:13 ` [PATCH V2 9/9] Support for AC97 on Phytec pmc030 base board Jon Smirl
2009-05-24 12:13 ` [alsa-devel] " Mark Brown
2009-05-23 23:20 ` [PATCH V2 0/9] mpc5200 audio rework for AC97 Jon Smirl
2009-05-24 11:08 ` [alsa-devel] " Mark Brown
2009-05-24 15:21 ` Jon Smirl
2009-05-24 18:35 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090523231303.17919.35877.stgit@terra \
--to=jonsmirl@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@sirena.org.uk \
--cc=grant.likely@secretlab.ca \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).