From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
Steven Rostedt <srostedt@redhat.com>,
Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH RFC 2/2] powerpc: Remove -fno-omit-frame-pointer workarounds
Date: Wed, 17 Jun 2009 00:16:32 +0400 [thread overview]
Message-ID: <20090616201632.GB4971@oksana.dev.rtsoft.ru> (raw)
The workarounds aren't needed any longer since the top level Makefile
doesn't pass -fno-omit-frame-pointer cflag for PowerPC builds.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/Makefile | 5 -----
arch/powerpc/kernel/Makefile | 12 ++++++------
arch/powerpc/platforms/powermac/Makefile | 2 +-
lib/Kconfig.debug | 6 +++---
4 files changed, 10 insertions(+), 15 deletions(-)
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index bc35f4e..dd3c63b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -120,11 +120,6 @@ ifeq ($(CONFIG_6xx),y)
KBUILD_CFLAGS += -mcpu=powerpc
endif
-# Work around a gcc code-gen bug with -fno-omit-frame-pointer.
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-KBUILD_CFLAGS += -mno-sched-epilog
-endif
-
cpu-as-$(CONFIG_4xx) += -Wa,-m405
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 612b0c4..19ebe1b 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -14,14 +14,14 @@ endif
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
-CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
-CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_cputable.o = -pg
+CFLAGS_REMOVE_prom_init.o = -pg
+CFLAGS_REMOVE_btext.o = -pg
+CFLAGS_REMOVE_prom.o = -pg
# do not trace tracer code
-CFLAGS_REMOVE_ftrace.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_ftrace.o = -pg
# timers used by tracing
-CFLAGS_REMOVE_time.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_time.o = -pg
endif
obj-y := cputable.o ptrace.o syscalls.o \
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 50f1693..0eb8781 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -2,7 +2,7 @@ CFLAGS_bootx_init.o += -fPIC
ifdef CONFIG_FUNCTION_TRACER
# Do not trace early boot code
-CFLAGS_REMOVE_bootx_init.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_bootx_init.o = -pg
endif
obj-y += pic.o setup.o time.o feature.o pci.o \
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 39f113a..1479e54 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -492,7 +492,7 @@ config LOCKDEP
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !MIPS && !PPC && !ARM_UNWIND && !S390
+ select FRAME_POINTER if !MIPS && !ARM_UNWIND && !S390
select KALLSYMS
select KALLSYMS_ALL
@@ -861,13 +861,13 @@ config FAULT_INJECTION_STACKTRACE_FILTER
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !PPC && !S390
+ select FRAME_POINTER if !S390
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS && !PPC && !S390
+ select FRAME_POINTER if !MIPS && !S390
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
--
1.6.3.1
reply other threads:[~2009-06-16 20:17 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090616201632.GB4971@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mingo@elte.hu \
--cc=sam@ravnborg.org \
--cc=srostedt@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).