From: Grant Likely <grant.likely@secretlab.ca>
To: jonsmirl@gmail.com, linuxppc-dev@ozlabs.org,
alsa-devel@alsa-project.org, broonie@sirena.org.uk,
timur@freescale.com
Subject: [PATCH 1/2] alsa/soc: Fix typo in MPC5200 PSC AC97 driver Kconfig
Date: Sun, 28 Jun 2009 01:41:52 -0600 [thread overview]
Message-ID: <20090628074109.26905.9927.stgit@localhost.localdomain> (raw)
From: Grant Likely <grant.likely@secretlab.ca>
ALSA SoC drivers should be specify SND_SOC_AC97_BUS instead, not AC97_BUS.
Without SND_SOC_AC97_BUS defined, an AC97 device will not get correctly
registered on the AC97 bus, which prevents thinks like the WM9712
touchscreen driver from getting probed.
Tested against 2.6.31-rc1.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
sound/soc/fsl/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
index 5dbebf8..5661876 100644
--- a/sound/soc/fsl/Kconfig
+++ b/sound/soc/fsl/Kconfig
@@ -33,7 +33,7 @@ config SND_SOC_MPC5200_I2S
config SND_SOC_MPC5200_AC97
tristate "Freescale MPC5200 PSC in AC97 mode driver"
depends on PPC_MPC52xx && PPC_BESTCOMM
- select AC97_BUS
+ select SND_SOC_AC97_BUS
select SND_MPC52xx_DMA
select PPC_BESTCOMM_GEN_BD
help
next reply other threads:[~2009-06-28 7:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-28 7:41 Grant Likely [this message]
2009-06-28 7:42 ` [PATCH 2/2] sound/soc: remove BROKEN from Efika and pcm030 fabric drivers Grant Likely
2009-06-28 18:06 ` Jon Smirl
2009-06-28 18:06 ` [PATCH 1/2] alsa/soc: Fix typo in MPC5200 PSC AC97 driver Kconfig Jon Smirl
2009-06-29 9:35 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090628074109.26905.9927.stgit@localhost.localdomain \
--to=grant.likely@secretlab.ca \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@sirena.org.uk \
--cc=jonsmirl@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).