From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: David Brownell <dbrownell@users.sourceforge.net>
Cc: linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] gpiolib: Implement gpio_set_values_sync()
Date: Mon, 13 Jul 2009 19:19:42 +0400 [thread overview]
Message-ID: <20090713151942.GA4486@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090713151911.GA28114@oksana.dev.rtsoft.ru>
Sometimes it's necessary to set GPIO values synchronously, e.g.
when CPU's GPIOs go to a FPGA and the FPGA has no latch-enable line,
so intermediate values on GPIO lines may trigger unnecessary actions
by the FPGA.
Another usage is chip-select muxes, e.g. using X GPIOs as address lines
to mux 2^X chip-selects, and setting some amount of GPIOs at once may
be a huge win.
Note that it's not always possible to set up GPIOs synchronously, so
gpio_can_set_values_sync() call is implemented. Currently it checks
for two things:
1. Whether gpio_chip has .set_sync() callback;
2. Whether all passed GPIOs belong to one particular gpio_chip.
Someday we may want to implement chip-specific .can_set_sync() check,
but currently this isn't needed.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
drivers/gpio/gpiolib.c | 57 ++++++++++++++++++++++++++++++++++++++++++++
include/asm-generic/gpio.h | 8 ++++++
include/linux/gpio.h | 14 ++++++++++
3 files changed, 79 insertions(+), 0 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 51a8d41..cf714ad 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1067,6 +1067,53 @@ void __gpio_set_value(unsigned gpio, int value)
EXPORT_SYMBOL_GPL(__gpio_set_value);
/**
+ * __gpio_can_set_values_sync() - check if gpios can be set synchronously
+ * @num: amount of gpios
+ * @gpios: gpios in question
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_can_set_values_sync().
+ * It returns nonzero if an array of gpios can be set simultaneously.
+ */
+int __gpio_can_set_values_sync(unsigned num, unsigned *gpios)
+{
+ struct gpio_chip *chip;
+ unsigned i;
+
+ chip = gpio_to_chip(gpios[0]);
+ if (!chip->set_sync)
+ return 0;
+
+ for (i = 1; i < num; i++) {
+ if (chip != gpio_to_chip(gpios[i]))
+ return 0;
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL_GPL(__gpio_can_set_values_sync);
+
+/**
+ * __gpio_set_values_sync() - assign gpios' values synchronously
+ * @num: amount of gpios
+ * @gpios: gpios whose value will be assigned
+ * @values: value to assign
+ * Context: any
+ *
+ * This is used directly or indirectly to implement gpio_set_values_sync().
+ * It invokes the associated gpio_chip.set_sync() method.
+ */
+void __gpio_set_values_sync(unsigned num, unsigned *gpios, int *values)
+{
+ struct gpio_chip *chip;
+
+ chip = gpio_to_chip(gpios[0]);
+ WARN_ON(extra_checks && chip->can_sleep);
+ chip->set_sync(chip, num, gpios, values);
+}
+EXPORT_SYMBOL_GPL(__gpio_set_values_sync);
+
+/**
* __gpio_cansleep() - report whether gpio value access will sleep
* @gpio: gpio in question
* Context: any
@@ -1129,6 +1176,16 @@ void gpio_set_value_cansleep(unsigned gpio, int value)
}
EXPORT_SYMBOL_GPL(gpio_set_value_cansleep);
+void gpio_set_values_sync_cansleep(unsigned num, unsigned *gpios, int *values)
+{
+ struct gpio_chip *chip;
+
+ might_sleep_if(extra_checks);
+ chip = gpio_to_chip(gpios[0]);
+ chip->set_sync(chip, num, gpios, values);
+}
+EXPORT_SYMBOL_GPL(gpio_set_values_sync_cansleep);
+
#ifdef CONFIG_DEBUG_FS
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index d6c379d..c181623 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -88,6 +88,10 @@ struct gpio_chip {
unsigned offset, int value);
void (*set)(struct gpio_chip *chip,
unsigned offset, int value);
+ /* NOTE: _sync() version accepts gpios, not offsets. */
+ void (*set_sync)(struct gpio_chip *chip,
+ unsigned num, unsigned *gpios,
+ int *values);
int (*to_irq)(struct gpio_chip *chip,
unsigned offset);
@@ -121,6 +125,8 @@ extern int gpio_direction_output(unsigned gpio, int value);
extern int gpio_get_value_cansleep(unsigned gpio);
extern void gpio_set_value_cansleep(unsigned gpio, int value);
+extern void gpio_set_values_sync_cansleep(unsigned num, unsigned *gpios,
+ int *values);
/* A platform's <asm/gpio.h> code may want to inline the I/O calls when
@@ -129,6 +135,8 @@ extern void gpio_set_value_cansleep(unsigned gpio, int value);
*/
extern int __gpio_get_value(unsigned gpio);
extern void __gpio_set_value(unsigned gpio, int value);
+extern int __gpio_can_set_values_sync(unsigned num, unsigned *gpios);
+extern void __gpio_set_values_sync(unsigned num, unsigned *gpios, int *values);
extern int __gpio_cansleep(unsigned gpio);
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index e10c49a..ff62c1e 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -62,6 +62,20 @@ static inline void gpio_set_value(unsigned gpio, int value)
WARN_ON(1);
}
+static inline int gpio_can_set_values_sync(unsigned num, unsigned *gpios)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void gpio_set_values_sync(unsigned num, unsigned *gpios,
+ int *values)
+{
+ /* GPIO can never have been requested or set as output */
+ WARN_ON(1);
+}
+
static inline int gpio_cansleep(unsigned gpio)
{
/* GPIO can never have been requested or set as {in,out}put */
--
1.6.3.3
next prev parent reply other threads:[~2009-07-13 15:19 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-13 15:19 [PATCH 0/2] Setting GPIOs simultaneously Anton Vorontsov
2009-07-13 15:19 ` Anton Vorontsov [this message]
2009-07-13 15:19 ` [PATCH 2/2] powerpc/qe: Implement set_sync() callback for QE GPIOs Anton Vorontsov
2009-07-13 16:01 ` [PATCH 0/2] Setting GPIOs simultaneously Joakim Tjernlund
2009-07-13 17:34 ` Anton Vorontsov
2009-07-13 19:59 ` Joakim Tjernlund
2009-07-13 22:20 ` Anton Vorontsov
2009-07-14 21:20 ` Ang: " Joakim Tjernlund
2009-07-14 22:09 ` Anton Vorontsov
2009-08-04 13:38 ` Joakim Tjernlund
2009-08-04 14:22 ` Anton Vorontsov
2009-08-04 14:59 ` Joakim Tjernlund
2009-08-04 15:33 ` Anton Vorontsov
[not found] ` <OFF188389D.68E638A2-ONC12575F2.00568C5B-C12575F2.0057FC95@LocalDomain>
2009-07-13 17:17 ` Joakim Tjernlund
2009-11-05 14:49 ` Kumar Gala
2009-11-05 14:58 ` Anton Vorontsov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090713151942.GA4486@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=dbrownell@users.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).