From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards
Date: Tue, 14 Jul 2009 17:35:05 +0400 [thread overview]
Message-ID: <20090714133505.GB28970@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090624163028.GA18825@oksana.dev.rtsoft.ru>
On Wed, Jun 24, 2009 at 08:30:28PM +0400, Anton Vorontsov wrote:
> Linux isn't able to detect link changes on ethernet ports that were
> used by U-Boot. This is because U-Boot wrongly clears interrupt
> polarity bit (INTPOL, 0x400) in the extended status register (EXT_SR,
> 0x1b) of Marvell PHYs.
>
> There is no easy way for PHY drivers to know IRQ line polarity (we
> could extract it from the device tree and pass it to phydevs, but
> that'll be quite a lot of work), so for now just reset the PHYs to
> their default states.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
I think this should be safe for 2.6.31...
Thanks,
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 13 +++++++++++++
> 1 files changed, 13 insertions(+), 0 deletions(-)
>
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> index 3268c95..34664c0 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> @@ -223,6 +223,19 @@ static void __init mpc85xx_mds_setup_arch(void)
> /* Turn UCC1 & UCC2 on */
> setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
> setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
> + } else if (machine_is(mpc8569_mds)) {
> +#define BCSR7_UCC12_GETHnRST (0x1 << 2)
> +#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
> + /*
> + * U-Boot mangles interrupt polarity for Marvell PHYs,
> + * so reset built-in and UEM Marvell PHYs, this puts
> + * the PHYs into their normal state.
> + */
> + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
> + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
> +
> + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
> + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
> }
> iounmap(bcsr_regs);
> }
> --
> 1.6.3.1
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
next prev parent reply other threads:[~2009-07-14 13:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-24 16:30 [PATCH] powerpc/85xx: Fix ethernet link detection on MPC8569E-MDS boards Anton Vorontsov
2009-07-14 13:35 ` Anton Vorontsov [this message]
2009-07-30 4:14 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090714133505.GB28970@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).