From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Kumar Gala <galak@kernel.crashing.org>
Cc: Scott Wood <scottwood@freescale.com>,
linuxppc-dev@ozlabs.org, Timur Tabi <timur@freescale.com>
Subject: [PATCH 5/5] powerpc/83xx: Add power management support for MPC83xx QE boards
Date: Sun, 30 Aug 2009 23:37:26 +0400 [thread overview]
Message-ID: <20090830193726.GE17519@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090830193625.GA14693@oksana.dev.rtsoft.ru>
Simply add power management controller nodes and sleep properties.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
arch/powerpc/boot/dts/kmeter1.dts | 7 +++++++
arch/powerpc/boot/dts/mpc832x_mds.dts | 9 +++++++++
arch/powerpc/boot/dts/mpc832x_rdb.dts | 9 +++++++++
arch/powerpc/boot/dts/mpc836x_mds.dts | 9 +++++++++
arch/powerpc/boot/dts/mpc836x_rdk.dts | 9 +++++++++
5 files changed, 43 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts
index 167044f..65b8b4f 100644
--- a/arch/powerpc/boot/dts/kmeter1.dts
+++ b/arch/powerpc/boot/dts/kmeter1.dts
@@ -59,6 +59,13 @@
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 436c9c6..05ad8c9 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -79,6 +79,13 @@
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -163,6 +170,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
@@ -428,5 +436,6 @@
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 9a0952f..f4fadb2 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -62,6 +62,13 @@
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -141,6 +148,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x4c>;
fsl,descriptor-types-mask = <0x0122003f>;
+ sleep = <&pmc 0x03000000>;
};
ipic:pic@700 {
@@ -360,5 +368,6 @@
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 39ff4c8..45cfa1c 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -99,6 +99,13 @@
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -194,6 +201,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: pic@700 {
@@ -470,5 +478,6 @@
0xe0008300 0x8>; /* config space access registers */
compatible = "fsl,mpc8349-pci";
device_type = "pci";
+ sleep = <&pmc 0x00010000>;
};
};
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 6315d6f..bdf4459 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -71,6 +71,13 @@
reg = <0x200 0x100>;
};
+ pmc: power@b00 {
+ compatible = "fsl,mpc8360-pmc", "fsl,mpc8349-pmc";
+ reg = <0xb00 0x100 0xa00 0x100>;
+ interrupts = <80 0x8>;
+ interrupt-parent = <&ipic>;
+ };
+
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -161,6 +168,7 @@
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x7e>;
fsl,descriptor-types-mask = <0x01010ebf>;
+ sleep = <&pmc 0x03000000>;
};
ipic: interrupt-controller@700 {
@@ -455,6 +463,7 @@
0xa800 0 0 2 &ipic 20 8
0xa800 0 0 3 &ipic 21 8
0xa800 0 0 4 &ipic 18 8>;
+ sleep = <&pmc 0x00010000>;
/* filled by u-boot */
bus-range = <0 0>;
clock-frequency = <0>;
--
1.6.3.3
next prev parent reply other threads:[~2009-08-30 19:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-30 19:36 [PATCH v2 0/5] Suspend/resume support for some 83xx/85xx/86xx boards Anton Vorontsov
2009-08-30 19:37 ` [PATCH 1/5] powerpc/qe: Make qe_reset() code path safe for repeated invocation Anton Vorontsov
2009-08-31 0:36 ` Tabi Timur-B04825
2009-08-31 18:47 ` Anton Vorontsov
2009-08-30 19:37 ` [PATCH 2/5] powerpc/85xx/86xx: Add suspend/resume support Anton Vorontsov
2009-08-31 0:38 ` Tabi Timur-B04825
2009-08-31 18:47 ` Anton Vorontsov
2009-09-14 17:28 ` Scott Wood
2009-09-14 20:20 ` [PATCH v3 " Anton Vorontsov
2009-09-14 20:45 ` Scott Wood
2009-09-14 21:47 ` Anton Vorontsov
2009-08-30 19:37 ` [PATCH 3/5] powerpc/85xx: Add power management support for MPC85xxMDS boards Anton Vorontsov
2009-08-30 19:37 ` [PATCH 4/5] powerpc/86xx: Add power management support for MPC8610HPCD boards Anton Vorontsov
2009-08-30 19:37 ` Anton Vorontsov [this message]
2009-09-14 15:33 ` [PATCH v2 0/5] Suspend/resume support for some 83xx/85xx/86xx boards Anton Vorontsov
2009-09-14 17:33 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090830193726.GE17519@oksana.dev.rtsoft.ru \
--to=avorontsov@ru.mvista.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=scottwood@freescale.com \
--cc=timur@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).