linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Robert Jennings <rcj@linux.vnet.ibm.com>
To: Mel Gorman <mel@csn.ul.ie>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	linuxppc-dev@ozlabs.org,
	Martin Schwidefsky <schwidefsky@de.ibm.com>,
	Badari Pulavarty <pbadari@us.ibm.com>,
	Brian King <brking@linux.vnet.ibm.com>,
	Paul Mackerras <paulus@samba.org>, Ingo Molnar <mingo@elte.hu>
Subject: [PATCH 1/2][v2] mm: add notifier in pageblock isolation for balloon drivers
Date: Fri, 2 Oct 2009 13:44:58 -0500	[thread overview]
Message-ID: <20091002184458.GC4908@austin.ibm.com> (raw)

Memory balloon drivers can allocate a large amount of memory which
is not movable but could be freed to accomodate memory hotplug remove.

Prior to calling the memory hotplug notifier chain the memory in the
pageblock is isolated.  If the migrate type is not MIGRATE_MOVABLE the
isolation will not proceed, causing the memory removal for that page
range to fail.

Rather than failing pageblock isolation if the the migrateteype is not
MIGRATE_MOVABLE, this patch checks if all of the pages in the pageblock
are owned by a registered balloon driver (or other entity) using a
notifier chain.  If all of the non-movable pages are owned by a balloon,
they can be freed later through the memory notifier chain and the range
can still be isolated in set_migratetype_isolate().

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>

---
 drivers/base/memory.c  |   19 +++++++++++++++++++
 include/linux/memory.h |   26 ++++++++++++++++++++++++++
 mm/page_alloc.c        |   45 ++++++++++++++++++++++++++++++++++++++-------
 3 files changed, 83 insertions(+), 7 deletions(-)

Index: b/drivers/base/memory.c
===================================================================
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -63,6 +63,20 @@ void unregister_memory_notifier(struct n
 }
 EXPORT_SYMBOL(unregister_memory_notifier);
 
+static BLOCKING_NOTIFIER_HEAD(memory_isolate_chain);
+
+int register_memory_isolate_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&memory_isolate_chain, nb);
+}
+EXPORT_SYMBOL(register_memory_isolate_notifier);
+
+void unregister_memory_isolate_notifier(struct notifier_block *nb)
+{
+	blocking_notifier_chain_unregister(&memory_isolate_chain, nb);
+}
+EXPORT_SYMBOL(unregister_memory_isolate_notifier);
+
 /*
  * register_memory - Setup a sysfs device for a memory block
  */
@@ -157,6 +171,11 @@ int memory_notify(unsigned long val, voi
 	return blocking_notifier_call_chain(&memory_chain, val, v);
 }
 
+int memory_isolate_notify(unsigned long val, void *v)
+{
+	return blocking_notifier_call_chain(&memory_isolate_chain, val, v);
+}
+
 /*
  * MEMORY_HOTPLUG depends on SPARSEMEM in mm/Kconfig, so it is
  * OK to have direct references to sparsemem variables in here.
Index: b/include/linux/memory.h
===================================================================
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -50,6 +50,18 @@ struct memory_notify {
 	int status_change_nid;
 };
 
+/*
+ * During pageblock isolation, count the number of pages in the
+ * range [start_pfn, start_pfn + nr_pages)
+ */
+#define MEM_ISOLATE_COUNT	(1<<0)
+
+struct memory_isolate_notify {
+	unsigned long start_pfn;
+	unsigned int nr_pages;
+	unsigned int pages_found;
+};
+
 struct notifier_block;
 struct mem_section;
 
@@ -76,14 +88,28 @@ static inline int memory_notify(unsigned
 {
 	return 0;
 }
+static inline int register_memory_isolate_notifier(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void unregister_memory_isolate_notifier(struct notifier_block *nb)
+{
+}
+static inline int memory_isolate_notify(unsigned long val, void *v)
+{
+	return 0;
+}
 #else
 extern int register_memory_notifier(struct notifier_block *nb);
 extern void unregister_memory_notifier(struct notifier_block *nb);
+extern int register_memory_isolate_notifier(struct notifier_block *nb);
+extern void unregister_memory_isolate_notifier(struct notifier_block *nb);
 extern int register_new_memory(int, struct mem_section *);
 extern int unregister_memory_section(struct mem_section *);
 extern int memory_dev_init(void);
 extern int remove_memory_block(unsigned long, struct mem_section *, int);
 extern int memory_notify(unsigned long val, void *v);
+extern int memory_isolate_notify(unsigned long val, void *v);
 extern struct memory_block *find_memory_block(struct mem_section *);
 #define CONFIG_MEM_BLOCK_SIZE	(PAGES_PER_SECTION<<PAGE_SHIFT)
 enum mem_add_context { BOOT, HOTPLUG };
Index: b/mm/page_alloc.c
===================================================================
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -48,6 +48,7 @@
 #include <linux/page_cgroup.h>
 #include <linux/debugobjects.h>
 #include <linux/kmemleak.h>
+#include <linux/memory.h>
 #include <trace/events/kmem.h>
 
 #include <asm/tlbflush.h>
@@ -4985,23 +4986,53 @@ void set_pageblock_flags_group(struct pa
 int set_migratetype_isolate(struct page *page)
 {
 	struct zone *zone;
-	unsigned long flags;
+	unsigned long flags, pfn, iter;
+	unsigned long immobile = 0;
+	struct memory_isolate_notify arg;
+	int notifier_ret;
 	int ret = -EBUSY;
 	int zone_idx;
 
 	zone = page_zone(page);
 	zone_idx = zone_idx(zone);
+
 	spin_lock_irqsave(&zone->lock, flags);
+	if (get_pageblock_migratetype(page) == MIGRATE_MOVABLE ||
+	    zone_idx == ZONE_MOVABLE) {
+		ret = 0;
+		goto out;
+	}
+
+	pfn = page_to_pfn(page);
+	arg.start_pfn = pfn;
+	arg.nr_pages = pageblock_nr_pages;
+	arg.pages_found = 0;
+
 	/*
-	 * In future, more migrate types will be able to be isolation target.
+	 * The pageblock can be isolated even if the migrate type is
+	 * not *_MOVABLE.  The memory isolation notifier chain counts
+	 * the number of pages in this pageblock that can be freed later
+	 * through the memory notifier chain.  If all of the pages are
+	 * accounted for, isolation can continue.
 	 */
-	if (get_pageblock_migratetype(page) != MIGRATE_MOVABLE &&
-	    zone_idx != ZONE_MOVABLE)
+	notifier_ret = memory_isolate_notify(MEM_ISOLATE_COUNT, &arg);
+	notifier_ret = notifier_to_errno(notifier_ret);
+       	if (notifier_ret || !arg.pages_found)
 		goto out;
-	set_pageblock_migratetype(page, MIGRATE_ISOLATE);
-	move_freepages_block(zone, page, MIGRATE_ISOLATE);
-	ret = 0;
+
+	for (iter = pfn; iter < (pfn + pageblock_nr_pages); iter++)
+		if (page_count(pfn_to_page(iter)))
+			immobile++;
+
+	if (arg.pages_found == immobile)
+		ret = 0;
+
 out:
+	if (!ret) {
+		set_pageblock_migratetype(page, MIGRATE_ISOLATE);
+		move_freepages_block(zone, page, MIGRATE_ISOLATE);
+	}
+
 	spin_unlock_irqrestore(&zone->lock, flags);
 	if (!ret)
 		drain_all_pages();

             reply	other threads:[~2009-10-02 18:45 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-02 18:44 Robert Jennings [this message]
2009-10-02 18:52 ` [PATCH 2/2][v2] powerpc: Make the CMM memory hotplug aware Robert Jennings
2009-10-08 12:12   ` Gerald Schaefer
2009-10-08 13:13     ` Robert Jennings
2009-10-15 18:21       ` Gerald Schaefer
2009-10-16 16:48         ` Christoph Lameter
2009-10-08 23:34 ` [PATCH 1/2][v2] mm: add notifier in pageblock isolation for balloon drivers Andrew Morton
2009-10-09 20:23   ` Robert Jennings
2009-10-09 20:43     ` Mel Gorman
2009-10-13 15:48       ` Robert Jennings
2009-10-09  0:47 ` KAMEZAWA Hiroyuki
2009-10-09 14:33   ` Robert Jennings
2009-10-09 11:21 ` Mel Gorman
2009-10-09 14:43   ` Robert Jennings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091002184458.GC4908@austin.ibm.com \
    --to=rcj@linux.vnet.ibm.com \
    --cc=brking@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=mel@csn.ul.ie \
    --cc=mingo@elte.hu \
    --cc=paulus@samba.org \
    --cc=pbadari@us.ibm.com \
    --cc=schwidefsky@de.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).