linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anatolij Gustschin <agust@denx.de>
To: James Bottomley <James.Bottomley@suse.de>
Cc: linuxppc-dev@ozlabs.org, Eric.Moore@lsi.com,
	Pravin Bathija <pbathija@amcc.com>,
	linux-scsi@vger.kernel.org
Subject: Re: [PATCH] [SCSI] mpt fusion: Fix 32 bit platforms with 64 bit resources.
Date: Thu, 10 Dec 2009 17:36:44 +0100	[thread overview]
Message-ID: <20091210173644.20a86b88@wker> (raw)
In-Reply-To: <1260459818.2457.77.camel@mulgrave.site>

On Thu, 10 Dec 2009 09:43:38 -0600
James Bottomley <James.Bottomley@suse.de> wrote:

> On Wed, 2009-12-02 at 17:51 -0800, Pravin Bathija wrote:
> > Powerpc 44x uses 36 bit real address while the real address defined
> >     in MPT Fusion driver is of type 32 bit. This causes ioremap to fail and driver
> >     fails to initialize. This fix changes the data types representing the real
> >     address from unsigned long 32-bit types to resource_size_t which is 64-bit. The
> >     driver has been tested, the disks get discovered correctly and can do IO.
> > 
> > Signed-off-by: Pravin Bathija <pbathija@amcc.com>
> > Acked-by: Feng Kan <fkan@amcc.com>
> > Acked-by: Fushen Chen <fchen@amcc.com>
> > Acked-by: Loc Ho <lho@amcc.com>
> > Acked-by: Tirumala Reddy Marri <tmarri@amcc.com>
> > Acked-by: Victor Gallardo <vgallardo@amcc.com>
> > ---
> >  drivers/message/fusion/mptbase.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> > 
> > diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
> > index 5d496a9..9f14a60 100644
> > --- a/drivers/message/fusion/mptbase.c
> > +++ b/drivers/message/fusion/mptbase.c
> > @@ -1511,7 +1511,7 @@ mpt_mapresources(MPT_ADAPTER *ioc)
> >  {
> >  	u8		__iomem *mem;
> >  	int		 ii;
> > -	unsigned long	 mem_phys;
> > +	resource_size_t	 mem_phys;
> 
> You never actually compiled this, did you?
> 
> drivers/message/fusion/mptbase.c: In function 'mpt_mapresources':
> drivers/message/fusion/mptbase.c:1680: warning: format '%lx' expects type 'long unsigned int', but argument 4 has type 'resource_size_t'
> 
> I'll just fold the fix in

another patch (inlined below) should probably also go in as 'mem_phys' is
assigned to ioc->mem_phys which is 'u32'. ioc->mem_phys is never used in
the driver, however.

Some time ago I posted a patch which enables using second LSI SAS HBA on
PPC440SPe based katmai board again:

http://thread.gmane.org/gmane.linux.scsi/54839

Could someone comment on this patch, please. Thanks!

Anatolij

---

diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index 8dd4d21..8dc58e3 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -605,7 +605,7 @@ typedef struct _MPT_ADAPTER
 	SYSIF_REGS __iomem	*chip;		/* == c8817000 (mmap) */
 	SYSIF_REGS __iomem	*pio_chip;	/* Programmed IO (downloadboot) */
 	u8			 bus_type;
-	u32			 mem_phys;	/* == f4020000 (mmap) */
+	resource_size_t		 mem_phys;	/* == f4020000 (mmap) */
 	u32			 pio_mem_phys;	/* Programmed IO (downloadboot) */
 	int			 mem_size;	/* mmap memory size */
 	int			 number_of_buses;

  reply	other threads:[~2009-12-10 16:36 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-03  1:51 [PATCH] [SCSI] mpt fusion: Fix 32 bit platforms with 64 bit resources Pravin Bathija
2009-12-03  2:59 ` Benjamin Herrenschmidt
2009-12-03  5:26   ` Desai, Kashyap
2009-12-03  8:56 ` Wolfgang Denk
2009-12-03 23:21   ` Pravin Bathija
2009-12-03 23:48     ` Benjamin Herrenschmidt
2009-12-10 15:43 ` James Bottomley
2009-12-10 16:36   ` Anatolij Gustschin [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-11-18  0:16 pbathija
2009-11-18  5:41 ` Benjamin Herrenschmidt
2009-09-15 22:25 pbathija
2009-11-05 13:43 ` Josh Boyer
2009-11-05 16:07   ` James Bottomley
2009-11-05 16:25     ` Josh Boyer
2009-11-05 20:00     ` Benjamin Herrenschmidt
2009-11-06  4:59       ` Desai, Kashyap
2009-11-06  5:49       ` Pravin Bathija
2009-11-06  5:57       ` Pravin Bathija
2009-09-09  0:15 pbathija
2009-09-15 10:29 ` Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091210173644.20a86b88@wker \
    --to=agust@denx.de \
    --cc=Eric.Moore@lsi.com \
    --cc=James.Bottomley@suse.de \
    --cc=linux-scsi@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=pbathija@amcc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).