From: Wolfram Sang <w.sang@pengutronix.de>
To: Anatolij Gustschin <agust@denx.de>
Cc: linuxppc-dev@ozlabs.org, wd@denx.de, dzu@denx.de,
Piotr Ziecik <kosmo@semihalf.com>
Subject: Re: [PATCH 03/11] powerpc/mpc5121: Add machine restart support
Date: Wed, 20 Jan 2010 12:28:43 +0100 [thread overview]
Message-ID: <20100120112843.GE5041@pengutronix.de> (raw)
In-Reply-To: <1263932653-3634-4-git-send-email-agust@denx.de>
[-- Attachment #1: Type: text/plain, Size: 4776 bytes --]
On Tue, Jan 19, 2010 at 09:24:05PM +0100, Anatolij Gustschin wrote:
> Add reset module registers representation and
> machine restart callback for mpc5121 platform.
>
> Signed-off-by: Piotr Ziecik <kosmo@semihalf.com>
> Signed-off-by: Wolfgang Denk <wd@denx.de>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Cc: John Rigby <jcrigby@gmail.com>
Looks good to me. Minor nits below.
> ---
> arch/powerpc/include/asm/mpc5xxx.h | 14 +++++++++-
> arch/powerpc/platforms/512x/mpc5121_ads.c | 1 +
> arch/powerpc/platforms/512x/mpc5121_generic.c | 1 +
> arch/powerpc/platforms/512x/mpc512x.h | 1 +
> arch/powerpc/platforms/512x/mpc512x_shared.c | 35 +++++++++++++++++++++++++
> 5 files changed, 51 insertions(+), 1 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/mpc5xxx.h b/arch/powerpc/include/asm/mpc5xxx.h
> index 5ce9c5f..0004986 100644
> --- a/arch/powerpc/include/asm/mpc5xxx.h
> +++ b/arch/powerpc/include/asm/mpc5xxx.h
> @@ -18,5 +18,17 @@
>
> extern unsigned long mpc5xxx_get_bus_frequency(struct device_node *node);
>
> -#endif /* __ASM_POWERPC_MPC5xxx_H__ */
> +/* MPC512x Reset module registers */
> +struct mpc512x_reset_module {
> + u32 rcwlr; /* Reset Configuration Word Low Register */
> + u32 rcwhr; /* Reset Configuration Word High Register */
> + u32 reserved1;
> + u32 reserved2;
> + u32 rsr; /* Reset Status Register */
> + u32 rmr; /* Reset Mode Register */
> + u32 rpr; /* Reset Protection Register */
> + u32 rcr; /* Reset Control Register */
> + u32 rcer; /* Reset Control Enable Register */
> +};
>
> +#endif /* __ASM_POWERPC_MPC5xxx_H__ */
> diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
> index 441abc4..2f40404 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_ads.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
> @@ -68,4 +68,5 @@ define_machine(mpc5121_ads) {
> .init_IRQ = mpc5121_ads_init_IRQ,
> .get_irq = ipic_get_irq,
> .calibrate_decr = generic_calibrate_decr,
> + .restart = mpc512x_restart,
> };
> diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
> index 2479de9..de4c3f7 100644
> --- a/arch/powerpc/platforms/512x/mpc5121_generic.c
> +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
> @@ -55,4 +55,5 @@ define_machine(mpc5121_generic) {
> .init_IRQ = mpc512x_init_IRQ,
> .get_irq = ipic_get_irq,
> .calibrate_decr = generic_calibrate_decr,
> + .restart = mpc512x_restart,
> };
> diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
> index 22a5352..c38875c 100644
> --- a/arch/powerpc/platforms/512x/mpc512x.h
> +++ b/arch/powerpc/platforms/512x/mpc512x.h
> @@ -12,5 +12,6 @@
> #ifndef __MPC512X_H__
> #define __MPC512X_H__
> extern void __init mpc512x_init_IRQ(void);
> +extern void mpc512x_restart(char *cmd);
> void __init mpc512x_declare_of_platform_devices(void);
> #endif /* __MPC512X_H__ */
> diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
> index 434d683..8a0d577 100644
> --- a/arch/powerpc/platforms/512x/mpc512x_shared.c
> +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
> @@ -21,9 +21,44 @@
> #include <asm/ipic.h>
> #include <asm/prom.h>
> #include <asm/time.h>
> +#include <asm/mpc5xxx.h>
>
> #include "mpc512x.h"
>
> +static void __iomem *reset_module_base;
type here also?
> +
> +static int __init mpc512x_restart_init(void)
> +{
> + struct device_node *np;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
> + if (!np)
> + return -1;
> +
> + reset_module_base = of_iomap(np, 0);
> + of_node_put(np);
> +
> + return 0;
> +}
> +
Drop this empty line?
> +arch_initcall(mpc512x_restart_init);
> +
> +void mpc512x_restart(char *cmd)
> +{
> + struct mpc512x_reset_module *rm = reset_module_base;
> +
> + if (rm) {
> + /* Enable software reset "RSTE" */
> + out_be32(&rm->rpr, 0x52535445);
> + /* Set software hard reset */
> + out_be32(&rm->rcr, 0x2);
> + } else {
> + printk(KERN_ERR ": Restart module not mapped.\n");
The colon is a leftover?
> + }
> + for (;;)
> + ;
> +}
> +
> void __init mpc512x_init_IRQ(void)
> {
> struct device_node *np;
> --
> 1.5.6.3
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Pengutronix e.K. | Wolfram Sang |
Industrial Linux Solutions | http://www.pengutronix.de/ |
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2010-01-20 11:28 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-19 20:24 [PATCH 0/11] Update support for MPC512x Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 01/11] fs_enet: Add support for MPC512x to fs_enet driver Anatolij Gustschin
2010-01-19 20:48 ` Scott Wood
2010-01-20 11:20 ` Anatolij Gustschin
2010-01-20 17:02 ` Scott Wood
2010-01-19 20:24 ` [PATCH 02/11] fs_enet: Add FEC TX Alignment workaround for MPC5121 Anatolij Gustschin
2010-01-19 20:37 ` David Miller
2010-01-19 23:42 ` Stephen Rothwell
2010-01-20 4:04 ` David Miller
2010-01-20 10:22 ` Wolfram Sang
2010-01-19 20:24 ` [PATCH 03/11] powerpc/mpc5121: Add machine restart support Anatolij Gustschin
2010-01-20 11:28 ` Wolfram Sang [this message]
2010-01-26 7:53 ` Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 04/11] i2c-mpc: Add MPC5121 I2C bus support Anatolij Gustschin
2010-01-21 17:12 ` Grant Likely
2010-01-22 12:15 ` Wolfgang Grandegger
2010-01-19 20:24 ` [PATCH 05/11] rtc: Add MPC5121 Real time clock driver Anatolij Gustschin
2010-01-20 11:01 ` Wolfram Sang
2010-01-20 22:19 ` [rtc-linux] " Alessandro Zummo
2010-01-19 20:24 ` [PATCH 06/11] mtd: Add MPC5121 NAND Flash Controller driver Anatolij Gustschin
2010-01-20 10:49 ` Wolfram Sang
2010-01-25 15:56 ` Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 07/11] dma: Add MPC512x DMA driver Anatolij Gustschin
2010-01-21 17:22 ` Grant Likely
2010-01-26 8:03 ` Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 08/11] powerpc/mpc5121: add USB host support Anatolij Gustschin
2010-01-21 17:43 ` Grant Likely
2010-01-25 17:00 ` Anatolij Gustschin
2010-01-27 16:52 ` Grant Likely
2010-01-19 20:24 ` [PATCH 09/11] powerpc/mpc512x: shared DIU framebuffer support Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 10/11] powerpc/mpc5121: update mpc5121ads DTS Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 11/11] powerpc/mpc5121: Add default config for MPC5121ADS Anatolij Gustschin
2010-01-21 17:47 ` Grant Likely
2010-01-20 11:22 ` [PATCH 0/11] Update support for MPC512x Wolfram Sang
2010-01-26 8:06 ` Anatolij Gustschin
2010-01-26 12:16 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100120112843.GE5041@pengutronix.de \
--to=w.sang@pengutronix.de \
--cc=agust@denx.de \
--cc=dzu@denx.de \
--cc=kosmo@semihalf.com \
--cc=linuxppc-dev@ozlabs.org \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).