From: Anatolij Gustschin <agust@denx.de>
To: Wolfram Sang <w.sang@pengutronix.de>
Cc: wd@denx.de, dzu@denx.de, linuxppc-dev@ozlabs.org,
linux-mtd@lists.infradead.org, Piotr Ziecik <kosmo@semihalf.com>
Subject: Re: [PATCH 06/11] mtd: Add MPC5121 NAND Flash Controller driver
Date: Mon, 25 Jan 2010 16:56:24 +0100 [thread overview]
Message-ID: <20100125165624.1e567a95@wker> (raw)
In-Reply-To: <20100120104915.GB5041@pengutronix.de>
Hi Wolfram,
Wolfram Sang <w.sang@pengutronix.de> wrote:
> Please include a logfile with changes since the last version. This really
> helps.
Ok.
> > +static int __init mpc5121_nfc_probe(struct of_device *op,
> > + const struct of_device_id *match)
>
> [...]
>
> > +{
> > + /* Support external chip-select logic on ADS5121 board */
> > + rootnode = of_find_node_by_path("/");
> > + if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
> > + retval = ads5121_chipselect_init(mtd);
> > + if (retval) {
> > + dev_err(dev, "Chipselect init error!\n");
> > + of_node_put(rootnode);
> > + return retval;
> > + }
> > +
> > + chip->select_chip = ads5121_select_chip;
> > + }
> > + of_node_put(rootnode);
>
> If we have to live with the platform-stuff being in the driver, maybe a table
> having the compatible-string and an init-function pointer per entry will make
> it scale better with the number of boards?
Maybe something like in the patch below can be accepted?
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
index 2980eb1..6807e72 100644
--- a/drivers/mtd/nand/mpc5121_nfc.c
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -127,6 +127,10 @@ struct mpc5121_nfc_prv {
struct device *dev;
};
+struct mpc5121_nfc_match_data {
+ int (*init)(struct mtd_info *);
+};
+
static void mpc5121_nfc_done(struct mtd_info *mtd);
#ifdef CONFIG_MTD_PARTITIONS
@@ -279,6 +283,26 @@ static void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
nfc_set(mtd, NFC_CONFIG1, NFC_CE);
}
+/* Control chips select signal on ADS5121 board */
+static void ads5121_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ u8 v;
+
+ /* CPLD Register 9 controls NAND /CE Lines */
+ v = in_8(prv->csreg + 9);
+ v |= 0x0F;
+
+ if (chip >= 0) {
+ mpc5121_nfc_select_chip(mtd, 0);
+ v &= ~(1 << chip);
+ } else
+ mpc5121_nfc_select_chip(mtd, -1);
+
+ out_8(prv->csreg + 9, v);
+}
+
/* Init external chip select logic on ADS5121 board */
static int ads5121_chipselect_init(struct mtd_info *mtd)
{
@@ -293,33 +317,13 @@ static int ads5121_chipselect_init(struct mtd_info *mtd)
if (!prv->csreg)
return -ENOMEM;
- /* CPLD Register 9 controls NAND /CE Lines */
- prv->csreg += 9;
+ chip->select_chip = ads5121_select_chip;
return 0;
}
return -EINVAL;
}
-/* Control chips select signal on ADS5121 board */
-static void ads5121_select_chip(struct mtd_info *mtd, int chip)
-{
- struct nand_chip *nand = mtd->priv;
- struct mpc5121_nfc_prv *prv = nand->priv;
- u8 v;
-
- v = in_8(prv->csreg);
- v |= 0x0F;
-
- if (chip >= 0) {
- mpc5121_nfc_select_chip(mtd, 0);
- v &= ~(1 << chip);
- } else
- mpc5121_nfc_select_chip(mtd, -1);
-
- out_8(prv->csreg, v);
-}
-
/* Read NAND Ready/Busy signal */
static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
{
@@ -649,7 +653,7 @@ static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
static int __init mpc5121_nfc_probe(struct of_device *op,
const struct of_device_id *match)
{
- struct device_node *rootnode, *dn = op->node;
+ struct device_node *dn = op->node;
struct device *dev = &op->dev;
struct mpc5121_nfc_prv *prv;
struct resource res;
@@ -663,6 +667,7 @@ static int __init mpc5121_nfc_probe(struct of_device *op,
int resettime = 0;
int retval = 0;
int rev, len;
+ struct mpc5121_nfc_match_data *data = match->data;
/*
* Check SoC revision. This driver supports only NFC
@@ -738,19 +743,13 @@ static int __init mpc5121_nfc_probe(struct of_device *op,
chip->options = NAND_NO_AUTOINCR | NAND_USE_FLASH_BBT;
chip->ecc.mode = NAND_ECC_SOFT;
- /* Support external chip-select logic on ADS5121 board */
- rootnode = of_find_node_by_path("/");
- if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
- retval = ads5121_chipselect_init(mtd);
+ if (data && data->init) {
+ retval = data->init(mtd);
if (retval) {
dev_err(dev, "Chipselect init error!\n");
- of_node_put(rootnode);
- return retval;
+ goto error;
}
-
- chip->select_chip = ads5121_select_chip;
}
- of_node_put(rootnode);
/* Enable NFC clock */
prv->clk = clk_get(dev, "nfc_clk");
@@ -884,6 +883,11 @@ static int __exit mpc5121_nfc_remove(struct of_device *op)
static struct of_device_id mpc5121_nfc_match[] = {
{ .compatible = "fsl,mpc5121-nfc", },
+ { .compatible = "fsl,mpc5121ads-nfc",
+ .data = &(struct mpc5121_nfc_match_data) {
+ .init = ads5121_chipselect_init,
+ },
+ },
{},
};
next prev parent reply other threads:[~2010-01-25 15:56 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-19 20:24 [PATCH 0/11] Update support for MPC512x Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 01/11] fs_enet: Add support for MPC512x to fs_enet driver Anatolij Gustschin
2010-01-19 20:48 ` Scott Wood
2010-01-20 11:20 ` Anatolij Gustschin
2010-01-20 17:02 ` Scott Wood
2010-01-19 20:24 ` [PATCH 02/11] fs_enet: Add FEC TX Alignment workaround for MPC5121 Anatolij Gustschin
2010-01-19 20:37 ` David Miller
2010-01-19 23:42 ` Stephen Rothwell
2010-01-20 4:04 ` David Miller
2010-01-20 10:22 ` Wolfram Sang
2010-01-19 20:24 ` [PATCH 03/11] powerpc/mpc5121: Add machine restart support Anatolij Gustschin
2010-01-20 11:28 ` Wolfram Sang
2010-01-26 7:53 ` Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 04/11] i2c-mpc: Add MPC5121 I2C bus support Anatolij Gustschin
2010-01-21 17:12 ` Grant Likely
2010-01-22 12:15 ` Wolfgang Grandegger
2010-01-19 20:24 ` [PATCH 05/11] rtc: Add MPC5121 Real time clock driver Anatolij Gustschin
2010-01-20 11:01 ` Wolfram Sang
2010-01-20 22:19 ` [rtc-linux] " Alessandro Zummo
2010-01-19 20:24 ` [PATCH 06/11] mtd: Add MPC5121 NAND Flash Controller driver Anatolij Gustschin
2010-01-20 10:49 ` Wolfram Sang
2010-01-25 15:56 ` Anatolij Gustschin [this message]
2010-01-19 20:24 ` [PATCH 07/11] dma: Add MPC512x DMA driver Anatolij Gustschin
2010-01-21 17:22 ` Grant Likely
2010-01-26 8:03 ` Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 08/11] powerpc/mpc5121: add USB host support Anatolij Gustschin
2010-01-21 17:43 ` Grant Likely
2010-01-25 17:00 ` Anatolij Gustschin
2010-01-27 16:52 ` Grant Likely
2010-01-19 20:24 ` [PATCH 09/11] powerpc/mpc512x: shared DIU framebuffer support Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 10/11] powerpc/mpc5121: update mpc5121ads DTS Anatolij Gustschin
2010-01-19 20:24 ` [PATCH 11/11] powerpc/mpc5121: Add default config for MPC5121ADS Anatolij Gustschin
2010-01-21 17:47 ` Grant Likely
2010-01-20 11:22 ` [PATCH 0/11] Update support for MPC512x Wolfram Sang
2010-01-26 8:06 ` Anatolij Gustschin
2010-01-26 12:16 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100125165624.1e567a95@wker \
--to=agust@denx.de \
--cc=dzu@denx.de \
--cc=kosmo@semihalf.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=w.sang@pengutronix.de \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).