From: Anton Blanchard <anton@samba.org>
To: benh@kernel.crashing.org
Cc: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 5/7] powerpc: Add timer, performance monitor and machine check counts to /proc/interrupts
Date: Mon, 1 Feb 2010 17:34:06 +1100 [thread overview]
Message-ID: <20100201063406.GX2996@kryten> (raw)
In-Reply-To: <20100201063341.GW2996@kryten>
With NO_HZ it is useful to know how often the decrementer is going off. The
patch below adds an entry for it and also adds it into the /proc/stat
summaries.
While here, I added performance monitoring and machine check exceptions.
I found it useful to keep an eye on the PMU exception rate
when using the perf tool. Since it's possible to take a completely
handled machine check on a System p box it also sounds like a good idea to
keep a machine check summary.
The event naming matches x86 to keep gratuitous differences to a minimum.
Signed-off-by: Anton Blanchard <anton@samba.org>
---
If people really don't like the x86 short names, we can think up something
else.
Index: linux-cpumask/arch/powerpc/include/asm/hardirq.h
===================================================================
--- linux-cpumask.orig/arch/powerpc/include/asm/hardirq.h 2010-02-01 17:28:56.990963256 +1100
+++ linux-cpumask/arch/powerpc/include/asm/hardirq.h 2010-02-01 17:29:03.887211643 +1100
@@ -6,6 +6,9 @@
typedef struct {
unsigned int __softirq_pending;
+ unsigned int timer_irqs;
+ unsigned int pmu_irqs;
+ unsigned int mce_exceptions;
} ____cacheline_aligned irq_cpustat_t;
DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
@@ -19,4 +22,10 @@ static inline void ack_bad_irq(unsigned
printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
}
+extern u64 arch_irq_stat_cpu(unsigned int cpu);
+#define arch_irq_stat_cpu arch_irq_stat_cpu
+
+extern u64 arch_irq_stat(void);
+#define arch_irq_stat arch_irq_stat
+
#endif /* _ASM_POWERPC_HARDIRQ_H */
Index: linux-cpumask/arch/powerpc/kernel/time.c
===================================================================
--- linux-cpumask.orig/arch/powerpc/kernel/time.c 2010-02-01 17:28:56.590961781 +1100
+++ linux-cpumask/arch/powerpc/kernel/time.c 2010-02-01 17:29:03.887211643 +1100
@@ -575,6 +575,8 @@ void timer_interrupt(struct pt_regs * re
trace_timer_interrupt_entry(regs);
+ __get_cpu_var(irq_stat).timer_irqs++;
+
/* Ensure a positive value is written to the decrementer, or else
* some CPUs will continuue to take decrementer exceptions */
set_dec(DECREMENTER_MAX);
Index: linux-cpumask/arch/powerpc/kernel/irq.c
===================================================================
--- linux-cpumask.orig/arch/powerpc/kernel/irq.c 2010-02-01 17:29:02.007212291 +1100
+++ linux-cpumask/arch/powerpc/kernel/irq.c 2010-02-01 17:29:03.887211643 +1100
@@ -196,6 +196,21 @@ static int show_other_interrupts(struct
}
#endif /* CONFIG_PPC32 && CONFIG_TAU_INT */
+ seq_printf(p, "%*s: ", prec, "LOC");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs);
+ seq_printf(p, " Local timer interrupts\n");
+
+ seq_printf(p, "%*s: ", prec, "CNT");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs);
+ seq_printf(p, " Performance monitoring interrupts\n");
+
+ seq_printf(p, "%*s: ", prec, "MCE");
+ for_each_online_cpu(j)
+ seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions);
+ seq_printf(p, " Machine check exceptions\n");
+
seq_printf(p, "%*s: %10u\n", prec, "BAD", ppc_spurious_interrupts);
return 0;
@@ -258,6 +273,26 @@ out:
return 0;
}
+/*
+ * /proc/stat helpers
+ */
+u64 arch_irq_stat_cpu(unsigned int cpu)
+{
+ u64 sum = per_cpu(irq_stat, cpu).timer_irqs;
+
+ sum += per_cpu(irq_stat, cpu).pmu_irqs;
+ sum += per_cpu(irq_stat, cpu).mce_exceptions;
+
+ return sum;
+}
+
+u64 arch_irq_stat(void)
+{
+ u64 sum = ppc_spurious_interrupts;
+
+ return sum;
+}
+
#ifdef CONFIG_HOTPLUG_CPU
void fixup_irqs(cpumask_t map)
{
Index: linux-cpumask/arch/powerpc/kernel/traps.c
===================================================================
--- linux-cpumask.orig/arch/powerpc/kernel/traps.c 2010-02-01 17:28:56.570961322 +1100
+++ linux-cpumask/arch/powerpc/kernel/traps.c 2010-02-01 17:29:03.897211396 +1100
@@ -478,6 +478,8 @@ void machine_check_exception(struct pt_r
{
int recover = 0;
+ __get_cpu_var(irq_stat).mce_exceptions++;
+
/* See if any machine dependent calls. In theory, we would want
* to call the CPU first, and call the ppc_md. one if the CPU
* one returns a positive number. However there is existing code
@@ -960,6 +962,8 @@ void vsx_unavailable_exception(struct pt
void performance_monitor_exception(struct pt_regs *regs)
{
+ __get_cpu_var(irq_stat).pmu_irqs++;
+
perf_irq(regs);
}
next prev parent reply other threads:[~2010-02-01 6:34 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-01 6:30 [PATCH 1/7] powerpc: Reduce footprint of irq_stat Anton Blanchard
2010-02-01 6:32 ` [PATCH 2/7] powerpc: Reduce footprint of xics_ipi_struct Anton Blanchard
2010-02-01 6:33 ` [PATCH 3/7] powerpc: Rework /proc/interrupts Anton Blanchard
2010-02-01 6:33 ` [PATCH 4/7] powerpc: Remove whitespace in irq chip name fields Anton Blanchard
2010-02-01 6:34 ` Anton Blanchard [this message]
2010-02-01 6:34 ` [PATCH 6/7] powerpc: Convert global "BAD" interrupt to per cpu spurious Anton Blanchard
2010-02-01 6:34 ` [PATCH 7/7] powerpc: Increase NR_IRQS Kconfig maximum to 32768 Anton Blanchard
2010-02-01 21:55 ` [PATCH 1/7] powerpc: Reduce footprint of irq_stat Christoph Hellwig
2010-02-01 23:07 ` Benjamin Herrenschmidt
2010-02-02 8:19 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100201063406.GX2996@kryten \
--to=anton@samba.org \
--cc=benh@kernel.crashing.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).