From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 11 May 2010 11:38:56 +1000 From: Anton Blanchard To: benh@kernel.crashing.org, linasvepstas@gmail.com, leitao@linux.vnet.ibm.com, mmlnx@us.ibm.com, mikey@neuling.org Subject: [PATCH] powerpc: eeh: Fix oops when probing in early boot Message-ID: <20100511013855.GD12203@kryten> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: linuxppc-dev@ozlabs.org List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , If we take an EEH early enough, we oops: Call Trace: [c000000010483770] [c000000000013ee4] .show_stack+0xd8/0x218 (unreliable) [c000000010483850] [c000000000658940] .dump_stack+0x28/0x3c [c0000000104838d0] [c000000000057a68] .eeh_dn_check_failure+0x2b8/0x304 [c000000010483990] [c0000000000259c8] .rtas_read_config+0x120/0x168 [c000000010483a40] [c000000000025af4] .rtas_pci_read_config+0xe4/0x124 [c000000010483af0] [c00000000037af18] .pci_bus_read_config_word+0xac/0x104 [c000000010483bc0] [c0000000008fec98] .pcibios_allocate_resources+0x7c/0x220 [c000000010483c90] [c0000000008feed8] .pcibios_resource_survey+0x9c/0x418 [c000000010483d80] [c0000000008fea10] .pcibios_init+0xbc/0xf4 [c000000010483e20] [c000000000009844] .do_one_initcall+0x98/0x1d8 [c000000010483ed0] [c0000000008f0560] .kernel_init+0x228/0x2e8 [c000000010483f90] [c000000000031a08] .kernel_thread+0x54/0x70 EEH: Detected PCI bus error on device EEH: This PCI device has failed 1 times in the last hour: EEH: location=U78A5.001.WIH8464-P1 driver= pci addr=0001:00:01.0 EEH: of node=/pci@800000020000209/usb@1 EEH: PCI device/vendor: 00351033 EEH: PCI cmd/status register: 12100146 Unable to handle kernel paging request for data at address 0x00000468 Oops: Kernel access of bad area, sig: 11 [#1] .... NIP [c000000000057610] .rtas_set_slot_reset+0x38/0x10c LR [c000000000058724] .eeh_reset_device+0x5c/0x124 Call Trace: [c00000000bc6bd00] [c00000000005a0e0] .pcibios_remove_pci_devices+0x7c/0xb0 (unreliable) [c00000000bc6bd90] [c000000000058724] .eeh_reset_device+0x5c/0x124 [c00000000bc6be40] [c0000000000589c0] .handle_eeh_events+0x1d4/0x39c [c00000000bc6bf00] [c000000000059124] .eeh_event_handler+0xf0/0x188 [c00000000bc6bf90] [c000000000031a08] .kernel_thread+0x54/0x70 We called rtas_set_slot_reset while scanning the bus and before the pci_dn to pcidev mapping has been created. Since we only need the pcidev to work out the type of reset and that only gets set after the module for the device loads, lets just do a hot reset if the pcidev is NULL. Signed-off-by: Anton Blanchard --- Index: linux-2.6/arch/powerpc/platforms/pseries/eeh.c =================================================================== --- linux-2.6.orig/arch/powerpc/platforms/pseries/eeh.c 2010-05-10 17:25:10.703453565 +1000 +++ linux-2.6/arch/powerpc/platforms/pseries/eeh.c 2010-05-10 17:25:24.034323030 +1000 @@ -749,7 +749,7 @@ static void __rtas_set_slot_reset(struct /* Determine type of EEH reset required by device, * default hot reset or fundamental reset */ - if (dev->needs_freset) + if (dev && dev->needs_freset) rtas_pci_slot_reset(pdn, 3); else rtas_pci_slot_reset(pdn, 1);