linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* (no subject)
@ 2010-08-18 20:56 Wolfgang Denk
  2010-08-19  1:04 ` Stephen Rothwell
  2010-09-02  6:14 ` Re: Wolfgang Denk
  0 siblings, 2 replies; 22+ messages in thread
From: Wolfgang Denk @ 2010-08-18 20:56 UTC (permalink / raw)
  To: Rupjyoti Sarmah; +Cc: linuxppc-dev, Prodyut Hazarika, Mark Miesfeld

Dear Rupjyoti,

drivers/ata/sata_dwc_460ex.c fails to build in current mainline:

...
  CC      drivers/ata/sata_dwc_460ex.o
drivers/ata/sata_dwc_460ex.c:43:1: warning: "DRV_NAME" redefined
In file included from drivers/ata/sata_dwc_460ex.c:38:
drivers/ata/libata.h:31:1: warning: this is the location of the previous definition
drivers/ata/sata_dwc_460ex.c:44:1: warning: "DRV_VERSION" redefined
drivers/ata/libata.h:32:1: warning: this is the location of the previous definition
drivers/ata/sata_dwc_460ex.c: In function 'sata_dwc_exec_command_by_tag':
drivers/ata/sata_dwc_460ex.c:1356: warning: passing argument 1 of 'ata_get_cmd_descript' makes integer from pointer without a cast
drivers/ata/sata_dwc_460ex.c: At top level:
drivers/ata/sata_dwc_460ex.c:1592: warning: 'struct of_device' declared inside parameter list
drivers/ata/sata_dwc_460ex.c:1592: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/ata/sata_dwc_460ex.c: In function 'sata_dwc_probe':
drivers/ata/sata_dwc_460ex.c:1607: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1614: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1616: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1622: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1628: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1630: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1646: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1650: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1652: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1658: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1660: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1667: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1676: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1678: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1691: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1693: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c: At top level:
drivers/ata/sata_dwc_460ex.c:1705: warning: 'struct of_device' declared inside parameter list
drivers/ata/sata_dwc_460ex.c: In function 'sata_dwc_remove':
drivers/ata/sata_dwc_460ex.c:1707: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c:1720: error: dereferencing pointer to incomplete type
drivers/ata/sata_dwc_460ex.c: At top level:
drivers/ata/sata_dwc_460ex.c:1736: warning: initialization from incompatible pointer type
drivers/ata/sata_dwc_460ex.c:1737: warning: initialization from incompatible pointer type
make[2]: *** [drivers/ata/sata_dwc_460ex.o] Error 1

Do you have any hints how to fix that?

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Few people do business well who do nothing else.
                                       -- Philip Earl of Chesterfield

^ permalink raw reply	[flat|nested] 22+ messages in thread
* rcu_sched self-detected stall on CPU
@ 2022-04-05 21:41 Miguel Ojeda
  2022-04-06  9:31 ` Zhouyi Zhou
  0 siblings, 1 reply; 22+ messages in thread
From: Miguel Ojeda @ 2022-04-05 21:41 UTC (permalink / raw)
  To: linuxppc-dev, rcu

[-- Attachment #1: Type: text/plain, Size: 400 bytes --]

Hi PPC/RCU,

While merging v5.18-rc1 changes I noticed our CI PPC runs broke. I
reproduced the problem in v5.18-rc1 as well as next-20220405, under
both QEMU 4.2.1 and 6.1.0, with `-smp 2`; but I cannot reproduce it in
v5.17 from a few tries.

Sadly, the problem is not deterministic although it is not too hard to
reproduce (1 out of 5?). Please see attached config and QEMU output.

Cheers,
Miguel

[-- Attachment #2: qemu --]
[-- Type: application/octet-stream, Size: 20395 bytes --]

# qemu-system-ppc64 -kernel vmlinux -nographic -vga none -no-reboot -smp 2
qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-cfpc=workaround
qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-sbbc=workaround
qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ibs=workaround


SLOF **********************************************************************
QEMU Starting
 Build Date = Jan 31 2020 20:27:09
 FW Version = buildd@ release 20191209
 Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /vdevice/l-lan@71000002
Populating /vdevice/v-scsi@71000003
       SCSI: Looking for devices
          8200000000000000 CD-ROM   : "QEMU     QEMU CD-ROM      2.5+"
Populating /pci@800000020000000
No NVRAM common partition, re-initializing...
Scanning USB 
Using default console: /vdevice/vty@71000000
Detected RAM kernel at 400000 (121f8f0 bytes) 
     
  Welcome to Open Firmware

  Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 5.18.0-rc1 (root@test) (powerpc64le-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 SMP Tue Apr 5 21:09:40 UTC 2022
Detected machine type: 0000000000000101
command line:  
Max number of cores passed to firmware: 2 (NR_CPUS = 2)
Calling ibm,client-architecture-support...qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-cfpc=workaround
qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-sbbc=workaround
qemu-system-ppc64: warning: TCG doesn't support requested feature, cap-ibs=workaround


SLOF **********************************************************************
QEMU Starting
 Build Date = Jan 31 2020 20:27:09
 FW Version = buildd@ release 20191209
 Press "s" to enter Open Firmware.

Populating /vdevice methods
Populating /vdevice/vty@71000000
Populating /vdevice/nvram@71000001
Populating /vdevice/l-lan@71000002
Populating /vdevice/v-scsi@71000003
       SCSI: Looking for devices
          8200000000000000 CD-ROM   : "QEMU     QEMU CD-ROM      2.5+"
Populating /pci@800000020000000
Scanning USB 
Using default console: /vdevice/vty@71000000
Detected RAM kernel at 400000 (121f8f0 bytes) 
     
  Welcome to Open Firmware

  Copyright (c) 2004, 2017 IBM Corporation All rights reserved.
  This program and the accompanying materials are made available
  under the terms of the BSD License available at
  http://www.opensource.org/licenses/bsd-license.php

Booting from memory...
OF stdout device is: /vdevice/vty@71000000
Preparing to boot Linux version 5.18.0-rc1 (root@test) (powerpc64le-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 SMP Tue Apr 5 21:09:40 UTC 2022
Detected machine type: 0000000000000101
command line:  
Max number of cores passed to firmware: 2 (NR_CPUS = 2)
Calling ibm,client-architecture-support... done
memory layout at init:
  memory_limit : 0000000000000000 (16 MB aligned)
  alloc_bottom : 0000000001630000
  alloc_top    : 0000000020000000
  alloc_top_hi : 0000000020000000
  rmo_top      : 0000000020000000
  ram_top      : 0000000020000000
instantiating rtas at 0x000000001fff0000... done
prom_hold_cpus: skipped
copying OF device tree...
Building dt strings...
Building dt structure...
Device tree strings 0x0000000001640000 -> 0x0000000001640a77
Device tree struct  0x0000000001650000 -> 0x0000000001660000
Quiescing Open Firmware ...
Booting Linux via __start() @ 0x0000000000400000 ...
[    0.000000] radix-mmu: Page sizes from device-tree:
[    0.000000] radix-mmu: Page size shift = 12 AP=0x0
[    0.000000] radix-mmu: Page size shift = 16 AP=0x5
[    0.000000] radix-mmu: Page size shift = 21 AP=0x1
[    0.000000] radix-mmu: Page size shift = 30 AP=0x2
[    0.000000] Activating Kernel Userspace Access Prevention
[    0.000000] Activating Kernel Userspace Execution Prevention
[    0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 2.00 MiB pages (exec)
[    0.000000] radix-mmu: Mapped 0x0000000001200000-0x0000000020000000 with 2.00 MiB pages
[    0.000000] lpar: Using radix MMU under hypervisor
[    0.000000] Linux version 5.18.0-rc1 (root@test) (powerpc64le-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #2 SMP Tue Apr 5 21:09:40 UTC 2022
[    0.000000] Using pSeries machine description
[    0.000000] printk: bootconsole [udbg0] enabled
[    0.000000] Partition configured for 2 cpus.
[    0.000000] CPU maps initialized for 1 thread per core
[    0.000000] -----------------------------------------------------
[    0.000000] phys_mem_size     = 0x20000000
[    0.000000] dcache_bsize      = 0x80
[    0.000000] icache_bsize      = 0x80
[    0.000000] cpu_features      = 0x0001c06b8f4f9187
[    0.000000]   possible        = 0x000ffbebcf5fb187
[    0.000000]   always          = 0x0000006b8b5c9181
[    0.000000] cpu_user_features = 0xdc0065c2 0xaef00000
[    0.000000] mmu_features      = 0x3c007641
[    0.000000] firmware_features = 0x00000085455a445f
[    0.000000] vmalloc start     = 0xc008000000000000
[    0.000000] IO start          = 0xc00a000000000000
[    0.000000] vmemmap start     = 0xc00c000000000000
[    0.000000] -----------------------------------------------------
[    0.000000] rfi-flush: fallback displacement flush available
[    0.000000] rfi-flush: ori type flush available
[    0.000000] rfi-flush: mttrig type flush available
[    0.000000] count-cache-flush: software flush enabled.
[    0.000000] link-stack-flush: software flush enabled.
[    0.000000] stf-barrier: eieio barrier available
[    0.000000] PPC64 nvram contains 65536 bytes
[    0.000000] PV qspinlock hash table entries: 4096 (order: 0, 65536 bytes, linear)
[    0.000000] barrier-nospec: using ORI speculation barrier
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001fffffff]
[    0.000000] percpu: Embedded 2 pages/cpu s32544 r0 d98528 u131072
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8185
[    0.000000] Kernel command line: 
[    0.000000] Dentry cache hash table entries: 65536 (order: 3, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 2, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:on
[    0.000000] mem auto-init: clearing system memory may take some time...
[    0.000000] Memory: 418560K/524288K available (4096K kernel code, 704K rwdata, 768K rodata, 1024K init, 446K bss, 105728K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x34/0x520 with crng_init=0
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
[    0.000000] xive: Using IRQ range [0-1]
[    0.000000] xive: Interrupt handling initialized with spapr backend
[    0.000000] xive: Using priority 6 for all interrupts
[    0.000000] xive: Using 64kB queues
[    0.000061] time_init: 56 bit decrementer (max: 7fffffffffffff)
[    0.000505] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
[    0.000999] clocksource: timebase mult[1f40000] shift[24] registered
[    0.007895] Console: colour dummy device 80x25
[    0.008493] printk: console [hvc0] enabled
[    0.008493] printk: console [hvc0] enabled
[    0.010438] printk: bootconsole [udbg0] disabled
[    0.010438] printk: bootconsole [udbg0] disabled
[    0.011696] pid_max: default: 32768 minimum: 301
[    0.012503] Mount-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[    0.012575] Mountpoint-cache hash table entries: 8192 (order: 0, 65536 bytes, linear)
[    0.041799] POWER9 performance monitor hardware support registered
[    0.042735] rcu: Hierarchical SRCU implementation.
[    0.045220] smp: Bringing up secondary CPUs ...
[    0.066059] smp: Brought up 1 node, 2 CPUs
[    0.093530] devtmpfs: initialized
[    0.100032] PCI host bridge /pci@800000020000000  ranges:
[    0.100607]   IO 0x0000200000000000..0x000020000000ffff -> 0x0000000000000000
[    0.100734]  MEM 0x0000200080000000..0x00002000ffffffff -> 0x0000000080000000 
[    0.100805]  MEM 0x0000210000000000..0x000021ffffffffff -> 0x0000210000000000 
[    0.101744] PCI: OF: PROBE_ONLY disabled
[    0.102198] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.102371] futex hash table entries: 512 (order: 0, 65536 bytes, linear)
Linux ppc64le
#2 SMP Tue Apr 5[    0.110196] EEH: pSeries platform initialized
[    0.115987] software IO TLB: tearing down default memory pool
[    0.134293] PCI: Probing PCI hardware
[    0.136684] PCI host bridge to bus 0000:00
[    0.136999] pci_bus 0000:00: root bus resource [io  0x10000-0x1ffff] (bus address [0x0000-0xffff])
[    0.137449] pci_bus 0000:00: root bus resource [mem 0x200080000000-0x2000ffffffff] (bus address [0x80000000-0xffffffff])
[    0.137535] pci_bus 0000:00: root bus resource [mem 0x210000000000-0x21ffffffffff 64bit]
[    0.137720] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.142416] IOMMU table initialized, virtual merging enabled
[    0.143475] pci_bus 0000:00: resource 4 [io  0x10000-0x1ffff]
[    0.143541] pci_bus 0000:00: resource 5 [mem 0x200080000000-0x2000ffffffff]
[    0.143575] pci_bus 0000:00: resource 6 [mem 0x210000000000-0x21ffffffffff 64bit]
[    0.143754] EEH: No capable adapters found: recovery disabled.
[    0.166254] vgaarb: loaded
[    0.168227] clocksource: Switched to clocksource timebase
[    0.182817] PCI: CLS 0 bytes, default 128
[    1.790625] workingset: timestamp_bits=62 max_order=13 bucket_order=0
[   21.186912] rcu: INFO: rcu_sched self-detected stall on CPU
[   21.187331] rcu: 	1-...!: (4712629 ticks this GP) idle=2c1/0/0x3 softirq=8/8 fqs=0 
[   21.187529] 	(t=21000 jiffies g=-1183 q=3)
[   21.187681] rcu: rcu_sched kthread timer wakeup didn't happen for 20997 jiffies! g-1183 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
[   21.187770] rcu: 	Possible timer handling issue on cpu=1 timer-softirq=1
[   21.187927] rcu: rcu_sched kthread starved for 21001 jiffies! g-1183 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
[   21.188019] rcu: 	Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
[   21.188087] rcu: RCU grace-period kthread stack dump:
[   21.188196] task:rcu_sched       state:I stack:    0 pid:   10 ppid:     2 flags:0x00000800
[   21.188453] Call Trace:
[   21.188525] [c0000000061e78a0] [c0000000061e78e0] 0xc0000000061e78e0 (unreliable)
[   21.188900] [c0000000061e7a90] [c000000000017210] __switch_to+0x250/0x310
[   21.189210] [c0000000061e7b00] [c0000000003ed660] __schedule+0x210/0x660
[   21.189315] [c0000000061e7b80] [c0000000003edb14] schedule+0x64/0x110
[   21.189387] [c0000000061e7bb0] [c0000000003f6648] schedule_timeout+0x1d8/0x390
[   21.189473] [c0000000061e7c80] [c00000000011111c] rcu_gp_fqs_loop+0x2dc/0x3d0
[   21.189555] [c0000000061e7d30] [c0000000001144ec] rcu_gp_kthread+0x13c/0x160
[   21.189633] [c0000000061e7dc0] [c0000000000c1770] kthread+0x110/0x120
[   21.189714] [c0000000061e7e10] [c00000000000c9e4] ret_from_kernel_thread+0x5c/0x64
[   21.189938] rcu: Stack dump where RCU GP kthread last ran:
[   21.189992] Task dump for CPU 1:
[   21.190059] task:swapper/1       state:R  running task     stack:    0 pid:    0 ppid:     1 flags:0x00000804
[   21.190169] Call Trace:
[   21.190194] [c0000000061ef2d0] [c0000000000c9a40] sched_show_task+0x180/0x1c0 (unreliable)
[   21.190278] [c0000000061ef340] [c000000000116ca0] rcu_check_gp_kthread_starvation+0x16c/0x19c
[   21.190370] [c0000000061ef3c0] [c000000000114f7c] rcu_sched_clock_irq+0x7ec/0xaf0
[   21.190448] [c0000000061ef4b0] [c000000000120fdc] update_process_times+0xbc/0x140
[   21.190524] [c0000000061ef4f0] [c000000000136a24] tick_nohz_handler+0xf4/0x1b0
[   21.190608] [c0000000061ef540] [c00000000001c828] timer_interrupt+0x148/0x2d0
[   21.190699] [c0000000061ef590] [c0000000000098e8] decrementer_common_virt+0x208/0x210
[   21.190837] --- interrupt: 900 at arch_local_irq_restore+0x168/0x170
[   21.190941] NIP:  c000000000013608 LR: c0000000003f8114 CTR: c0000000000dc630
[   21.191031] REGS: c0000000061ef600 TRAP: 0900   Not tainted  (5.18.0-rc1)
[   21.191109] MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22000202  XER: 00000000
[   21.191274] CFAR: 0000000000000000 IRQMASK: 0 
[   21.191274] GPR00: c00000000009c368 c0000000061ef8a0 c00000000116a700 0000000000000000 
[   21.191274] GPR04: 0000000000000000 0000000000000000 000000001ee30000 ffffffffffffffff 
[   21.191274] GPR08: 000000001ee30000 0000000000000000 0000000000008002 7265677368657265 
[   21.191274] GPR12: c0000000000dc630 c00000001ffe5800 0000000000000000 0000000000000000 
[   21.191274] GPR16: 0000000000000282 0000000000000000 0000000000000000 c0000000061eff00 
[   21.191274] GPR20: 0000000000000000 0000000000000001 c0000000061b9f80 c000000001195a10 
[   21.191274] GPR24: c000000001193a00 00000000fffb6cc4 000000000000000a c0000000010721e8 
[   21.191274] GPR28: c000000001076800 c000000001070380 c0000000010716d8 c0000000061b9f80 
[   21.191932] NIP [c000000000013608] arch_local_irq_restore+0x168/0x170
[   21.192024] LR [c0000000003f8114] __do_softirq+0xd4/0x2ec
[   21.192118] --- interrupt: 900
[   21.192158] [c0000000061ef8a0] [c0000000061b9f80] 0xc0000000061b9f80 (unreliable)
[   21.192227] [c0000000061ef9b0] [c00000000009c368] irq_exit+0xc8/0x110
[   21.192307] [c0000000061ef9d0] [c00000000001c858] timer_interrupt+0x178/0x2d0
[   21.192397] [c0000000061efa20] [c0000000000098e8] decrementer_common_virt+0x208/0x210
[   21.192495] --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
[   21.192566] NIP:  c000000000072988 LR: c000000000074fa8 CTR: c000000000074f10
[   21.192615] REGS: c0000000061efa90 TRAP: 0900   Not tainted  (5.18.0-rc1)
[   21.192659] MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28000202  XER: 00000000
[   21.192755] CFAR: 0000000000000000 IRQMASK: 0 
[   21.192755] GPR00: 0000000028000202 c0000000061efd30 c00000000116a700 0000000000000000 
[   21.192755] GPR04: c00000001fea0280 ffffffffffffffff 0000000001f40000 000000019d088fcf 
[   21.192755] GPR08: 000000001ee30000 c00000001ffe5400 0000000000000001 0000000100000000 
[   21.192755] GPR12: c000000000074f10 c00000001ffe5800 0000000000000000 0000000000000000 
[   21.192755] GPR16: 0000000000000000 0000000000000000 0000000000000000 c0000000061eff00 
[   21.192755] GPR20: c00000000003d440 0000000000000001 c000000001195b30 c000000001195a10 
[   21.192755] GPR24: 0000000000080000 c0000000061ba000 c000000001195a98 0000000000000001 
[   21.192755] GPR28: 0000000000000001 c0000000010716d0 c0000000010716d8 c0000000010716d0 
[   21.193290] NIP [c000000000072988] plpar_hcall_norets_notrace+0x18/0x2c
[   21.193363] LR [c000000000074fa8] pseries_lpar_idle+0x98/0x1b0
[   21.193428] --- interrupt: 900
[   21.193457] [c0000000061efd30] [0000000000000001] 0x1 (unreliable)
[   21.193512] [c0000000061efdb0] [c000000000018b54] arch_cpu_idle+0x44/0x180
[   21.193590] [c0000000061efde0] [c0000000003f75bc] default_idle_call+0x4c/0x7c
[   21.193679] [c0000000061efe00] [c0000000000e1384] do_idle+0x114/0x1e0
[   21.193747] [c0000000061efe60] [c0000000000e1664] cpu_startup_entry+0x34/0x40
[   21.193901] [c0000000061efe90] [c00000000003f044] start_secondary+0x624/0xa00
[   21.194002] [c0000000061eff90] [c00000000000cd54] start_secondary_prolog+0x10/0x14
[   21.194245] Task dump for CPU 1:
[   21.194284] task:swapper/1       state:R  running task     stack:    0 pid:    0 ppid:     1 flags:0x00000804
[   21.194374] Call Trace:
[   21.194400] [c0000000061ef2b0] [c0000000000c9a40] sched_show_task+0x180/0x1c0 (unreliable)
[   21.194479] [c0000000061ef320] [c000000000116df8] rcu_dump_cpu_stacks+0x128/0x188
[   21.194567] [c0000000061ef3c0] [c000000000114f9c] rcu_sched_clock_irq+0x80c/0xaf0
[   21.194642] [c0000000061ef4b0] [c000000000120fdc] update_process_times+0xbc/0x140
[   21.194712] [c0000000061ef4f0] [c000000000136a24] tick_nohz_handler+0xf4/0x1b0
[   21.194828] [c0000000061ef540] [c00000000001c828] timer_interrupt+0x148/0x2d0
[   21.194942] [c0000000061ef590] [c0000000000098e8] decrementer_common_virt+0x208/0x210
[   21.195035] --- interrupt: 900 at arch_local_irq_restore+0x168/0x170
[   21.195104] NIP:  c000000000013608 LR: c0000000003f8114 CTR: c0000000000dc630
[   21.195152] REGS: c0000000061ef600 TRAP: 0900   Not tainted  (5.18.0-rc1)
[   21.195199] MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22000202  XER: 00000000
[   21.195296] CFAR: 0000000000000000 IRQMASK: 0 
[   21.195296] GPR00: c00000000009c368 c0000000061ef8a0 c00000000116a700 0000000000000000 
[   21.195296] GPR04: 0000000000000000 0000000000000000 000000001ee30000 ffffffffffffffff 
[   21.195296] GPR08: 000000001ee30000 0000000000000000 0000000000008002 7265677368657265 
[   21.195296] GPR12: c0000000000dc630 c00000001ffe5800 0000000000000000 0000000000000000 
[   21.195296] GPR16: 0000000000000282 0000000000000000 0000000000000000 c0000000061eff00 
[   21.195296] GPR20: 0000000000000000 0000000000000001 c0000000061b9f80 c000000001195a10 
[   21.195296] GPR24: c000000001193a00 00000000fffb6cc4 000000000000000a c0000000010721e8 
[   21.195296] GPR28: c000000001076800 c000000001070380 c0000000010716d8 c0000000061b9f80 
[   21.195850] NIP [c000000000013608] arch_local_irq_restore+0x168/0x170
[   21.195944] LR [c0000000003f8114] __do_softirq+0xd4/0x2ec
[   21.196027] --- interrupt: 900
[   21.196056] [c0000000061ef8a0] [c0000000061b9f80] 0xc0000000061b9f80 (unreliable)
[   21.196119] [c0000000061ef9b0] [c00000000009c368] irq_exit+0xc8/0x110
[   21.196192] [c0000000061ef9d0] [c00000000001c858] timer_interrupt+0x178/0x2d0
[   21.196282] [c0000000061efa20] [c0000000000098e8] decrementer_common_virt+0x208/0x210
[   21.196373] --- interrupt: 900 at plpar_hcall_norets_notrace+0x18/0x2c
[   21.196439] NIP:  c000000000072988 LR: c000000000074fa8 CTR: c000000000074f10
[   21.196489] REGS: c0000000061efa90 TRAP: 0900   Not tainted  (5.18.0-rc1)
[   21.196534] MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 28000202  XER: 00000000
[   21.196627] CFAR: 0000000000000000 IRQMASK: 0 
[   21.196627] GPR00: 0000000028000202 c0000000061efd30 c00000000116a700 0000000000000000 
[   21.196627] GPR04: c00000001fea0280 ffffffffffffffff 0000000001f40000 000000019d088fcf 
[   21.196627] GPR08: 000000001ee30000 c00000001ffe5400 0000000000000001 0000000100000000 
[   21.196627] GPR12: c000000000074f10 c00000001ffe5800 0000000000000000 0000000000000000 
[   21.196627] GPR16: 0000000000000000 0000000000000000 0000000000000000 c0000000061eff00 
[   21.196627] GPR20: c00000000003d440 0000000000000001 c000000001195b30 c000000001195a10 
[   21.196627] GPR24: 0000000000080000 c0000000061ba000 c000000001195a98 0000000000000001 
[   21.196627] GPR28: 0000000000000001 c0000000010716d0 c0000000010716d8 c0000000010716d0 
[   21.197168] NIP [c000000000072988] plpar_hcall_norets_notrace+0x18/0x2c
[   21.197239] LR [c000000000074fa8] pseries_lpar_idle+0x98/0x1b0
[   21.197305] --- interrupt: 900
[   21.197333] [c0000000061efd30] [0000000000000001] 0x1 (unreliable)
[   21.197390] [c0000000061efdb0] [c000000000018b54] arch_cpu_idle+0x44/0x180
[   21.197470] [c0000000061efde0] [c0000000003f75bc] default_idle_call+0x4c/0x7c
[   21.197556] [c0000000061efe00] [c0000000000e1384] do_idle+0x114/0x1e0
[   21.197620] [c0000000061efe60] [c0000000000e1664] cpu_startup_entry+0x34/0x40
[   21.197696] [c0000000061efe90] [c00000000003f044] start_secondary+0x624/0xa00
[   21.197820] [c0000000061eff90] [c00000000000cd54] start_secondary_prolog+0x10/0x14

[-- Attachment #3: config --]
[-- Type: application/octet-stream, Size: 35266 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/powerpc 5.18.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="powerpc64le-linux-gnu-gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=90400
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23400
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23400
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_WERROR=y
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_XZ is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_WATCH_QUEUE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_USELIB is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
# end of Timers subsystem

CONFIG_HAVE_EBPF_JIT=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
# CONFIG_CGROUPS is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
CONFIG_TIME_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_XZ is not set
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_LD_ORPHAN_WARN=y
CONFIG_SYSCTL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
# CONFIG_EXPERT is not set
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# end of Kernel Performance Events And Counters

CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLAB_MERGE_DEFAULT is not set
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_PPC64=y

#
# Processor support
#
CONFIG_PPC_BOOK3S_64=y
# CONFIG_PPC_BOOK3E_64 is not set
CONFIG_GENERIC_CPU=y
# CONFIG_POWER7_CPU is not set
# CONFIG_POWER8_CPU is not set
# CONFIG_POWER9_CPU is not set
CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU_REGS=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_VSX=y
CONFIG_PPC_64S_HASH_MMU=y
CONFIG_PPC_RADIX_MMU=y
CONFIG_PPC_RADIX_MMU_DEFAULT=y
CONFIG_PPC_KUEP=y
CONFIG_PPC_KUAP=y
# CONFIG_PPC_KUAP_DEBUG is not set
CONFIG_PPC_PKEY=y
CONFIG_PPC_MM_SLICES=y
CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_PMU_SYSFS is not set
CONFIG_PPC_PERF_CTRS=y
CONFIG_FORCE_SMP=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_PPC_DOORBELL=y
# end of Processor support

# CONFIG_CPU_BIG_ENDIAN is not set
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_PPC64_BOOT_WRAPPER=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MAX=29
CONFIG_ARCH_MMAP_RND_BITS_MIN=14
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=13
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=7
CONFIG_NR_IRQS=512
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_PPC=y
CONFIG_PPC_BARRIER_NOSPEC=y
CONFIG_EARLY_PRINTK=y
CONFIG_PANIC_TIMEOUT=-1
# CONFIG_COMPAT is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_UDBG_16550=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_SUSPEND_NONZERO_CPU=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_PPC_DAWR=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_PPC_MSI_BITMAP=y
CONFIG_PPC_XICS=y
CONFIG_PPC_ICP_NATIVE=y
CONFIG_PPC_ICP_HV=y
CONFIG_PPC_ICS_RTAS=y
CONFIG_PPC_XIVE=y
CONFIG_PPC_XIVE_SPAPR=y

#
# Platform support
#
# CONFIG_PPC_POWERNV is not set
CONFIG_PPC_PSERIES=y
CONFIG_PARAVIRT_SPINLOCKS=y
CONFIG_PPC_SPLPAR=y
# CONFIG_PSERIES_ENERGY is not set
CONFIG_IO_EVENT_IRQ=y
# CONFIG_LPARCFG is not set
# CONFIG_PPC_SMLPAR is not set
# CONFIG_HV_PERF_CTRS is not set
CONFIG_IBMVIO=y
# CONFIG_PPC_SVM is not set
CONFIG_PPC_VAS=y
# CONFIG_KVM_GUEST is not set
# CONFIG_EPAPR_PARAVIRT is not set
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_PPC_DT_CPU_FTRS is not set
# CONFIG_UDBG_RTAS_CONSOLE is not set
CONFIG_PPC_SMP_MUXED_IPI=y
CONFIG_MPIC=y
# CONFIG_MPIC_MSGR is not set
CONFIG_PPC_I8259=y
CONFIG_PPC_RTAS=y
CONFIG_RTAS_ERROR_LOGGING=y
CONFIG_PPC_RTAS_DAEMON=y
# CONFIG_RTAS_PROC is not set
CONFIG_EEH=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# end of CPU Frequency scaling

#
# CPUIdle driver
#

#
# CPU Idle
#
# CONFIG_CPU_IDLE is not set
# end of CPU Idle
# end of CPUIdle driver

# CONFIG_GEN_RTC is not set
# end of Platform support

#
# Kernel options
#
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_PPC_TRANSACTIONAL_MEM is not set
CONFIG_HOTPLUG_CPU=y
CONFIG_PPC_QUEUED_SPINLOCKS=y
CONFIG_ARCH_CPU_PROBE_RELEASE=y
# CONFIG_PPC64_SUPPORTS_MEMORY_FAILURE is not set
# CONFIG_KEXEC is not set
CONFIG_RELOCATABLE=y
# CONFIG_RELOCATABLE_TEST is not set
# CONFIG_CRASH_DUMP is not set
# CONFIG_FA_DUMP is not set
# CONFIG_IRQ_ALL_CPUS is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0x5deadbeef0000000
# CONFIG_PPC_4K_PAGES is not set
CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_PAGE_SHIFT=16
CONFIG_THREAD_SHIFT=14
CONFIG_DATA_SHIFT=24
CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_PPC_PROT_SAO_LPAR is not set
CONFIG_SCHED_SMT=y
CONFIG_PPC_DENORMALISATION=y
CONFIG_CMDLINE=""
CONFIG_EXTRA_TARGETS=""
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
# CONFIG_PM is not set
# CONFIG_PPC_MEM_KEYS is not set
CONFIG_PPC_RTAS_FILTER=y
# end of Kernel options

CONFIG_ISA_DMA_API=y

#
# Bus options
#
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_FSL_LBC is not set
# end of Bus options

CONFIG_NONSTATIC_KERNEL=y
CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_ARCH_RANDOM=y
# CONFIG_VIRTUALIZATION is not set

#
# General architecture-dependent options
#
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_NMI_WATCHDOG=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_PAGE_SIZE=y
CONFIG_ARCH_WANT_IRQS_OFF_ACTIVATE_MM=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
# CONFIG_SECCOMP is not set
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_ARCH_MMAP_RND_BITS=14
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_HAVE_ARCH_NVRAM_OPS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND=y
# CONFIG_COMPAT_32BIT_TIME is not set
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLK_MQ_PCI=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
# CONFIG_MQ_IOSCHED_KYBER is not set
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_MMIOWB=y
CONFIG_MMIOWB=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_ARCH_KEEP_MEMBLOCK=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZSMALLOC is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_ANON_VMA_NAME is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

# CONFIG_NET is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
CONFIG_FORCE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_MSI_ARCH_FALLBACKS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_PCI_FTPCI100 is not set
# CONFIG_PCI_HOST_GENERIC is not set
# CONFIG_PCIE_XILINX is not set
# CONFIG_PCIE_MICROCHIP_HOST is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# CONFIG_PCIE_CADENCE_PLAT_HOST is not set
# CONFIG_PCI_J721E_HOST is not set
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# end of Bus devices

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
# CONFIG_OF_UNITTEST is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
# CONFIG_OF_OVERLAY is not set
CONFIG_OF_DMA_DEFAULT_COHERENT=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_NVME_FC is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBMVMC is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_OPEN_DICE is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_HABANA_AI is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_NR_UARTS=1
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set
CONFIG_SERIAL_8250_FSL=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_PERICOM=y
# CONFIG_SERIAL_OF_PLATFORM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_ICOM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SIFIVE is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_CONSOLE=y
# CONFIG_HVC_OLD_HVSI is not set
# CONFIG_HVC_RTAS is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_HVCS is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IBM_BSR is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_DEVMEM is not set
# CONFIG_NVRAM is not set
CONFIG_DEVPORT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set
# CONFIG_RANDOM_TRUST_BOOTLOADER is not set
# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_ATMEL_HLCDC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_MFD_HI6421_PMIC is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# ARM devices
#
# end of ARM devices

#
# Frame buffer Devices
#
# CONFIG_FB is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
# end of Backlight & LCD device support

#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

# CONFIG_SOUND is not set

#
# HID support
#
# CONFIG_HID is not set
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_GOLDFISH is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# CONFIG_QUICC_ENGINE is not set
# end of NXP/Freescale QorIQ SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# CONFIG_LITEX_SOC_CONTROLLER is not set
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
# CONFIG_AL_FIC is not set
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_CADENCE_DPHY is not set
# CONFIG_PHY_CADENCE_DPHY_RX is not set
# CONFIG_PHY_CADENCE_SALVO is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

# CONFIG_RAS is not set
# CONFIG_USB4 is not set

#
# Android
#
CONFIG_ANDROID=y
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_FSI is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

# CONFIG_MISC_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
# end of Memory initialization
# end of Kernel hardening options
# end of Security options

# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_DEFLATE=y
# CONFIG_XZ_DEC is not set
CONFIG_XARRAY_MULTI=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_DMA_OPS_BYPASS=y
CONFIG_ARCH_HAS_DMA_MAP_DIRECT=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_RESTRICTED_POOL is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_IOMMU_HELPER=y
# CONFIG_IRQ_POLL is not set
CONFIG_LIBFDT=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_MEMREMAP_COMPAT_ALIGN=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

# CONFIG_DEBUG_KERNEL is not set

#
# Compile-time checks and compiler options
#
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HEADERS_INSTALL is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_WW_MUTEX_SELFTEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
# CONFIG_STACKTRACE is not set
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set

#
# Debug kernel data structures
#
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# end of Debug kernel data structures

#
# RCU Debugging
#
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# end of RCU Debugging

CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_AUXDISPLAY is not set
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
# CONFIG_SAMPLE_KFIFO is not set
# CONFIG_SAMPLE_WATCHDOG is not set
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
# CONFIG_STRICT_DEVMEM is not set

#
# powerpc Debugging
#
# CONFIG_PPC_DISABLE_WERROR is not set
CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_JUMP_LABEL_FEATURE_CHECKS is not set
# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
# CONFIG_PPC_RFI_SRR_DEBUG is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
# end of powerpc Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re: [PATCH] Revert "asm-generic: Remove unneeded __ARCH_WANT_SYS_LLSEEK macro"
@ 2019-08-30 19:54 Arnd Bergmann
       [not found] ` <20190830202959.3539-1-msuchanek@suse.de>
  0 siblings, 1 reply; 22+ messages in thread
From: Arnd Bergmann @ 2019-08-30 19:54 UTC (permalink / raw)
  To: Michal Suchanek
  Cc: Rich Felker, Linux-sh list, Heiko Carstens, linux-mips,
	James E.J. Bottomley, Max Filippov, Guo Ren, H. Peter Anvin,
	sparclinux, Vincenzo Frascino, Will Deacon, linux-arch,
	linux-s390, Yoshinori Sato, Helge Deller,
	the arch/x86 maintainers, Russell King, Christian Borntraeger,
	Ingo Molnar, Geert Uytterhoeven, Linux ARM, Catalin Marinas,
	James Hogan, Firoz Khan, linux-xtensa, Vasily Gorbik, linux-m68k,
	Borislav Petkov, Alexander Viro, David Howells, Thomas Gleixner,
	Christian Brauner, Chris Zankel, Michal Simek, Parisc List,
	Greg Kroah-Hartman, Linux Kernel Mailing List, Ralf Baechle,
	Paul Burton, Linux FS-devel Mailing List, Paul Mackerras,
	linuxppc-dev, David S. Miller

On Fri, Aug 30, 2019 at 9:46 PM Michal Suchanek <msuchanek@suse.de> wrote:
>
> This reverts commit caf6f9c8a326cffd1d4b3ff3f1cfba75d159d70b.
>
> Maybe it was needed after all.
>
> When CONFIG_COMPAT is disabled on ppc64 the kernel does not build.
>
> There is resistance to both removing the llseek syscall from the 64bit
> syscall tables and building the llseek interface unconditionally.
>
> Link: https://lore.kernel.org/lkml/20190828151552.GA16855@infradead.org/
> Link: https://lore.kernel.org/lkml/20190829214319.498c7de2@naga/
>
> Signed-off-by: Michal Suchanek <msuchanek@suse.de>

This seems like the right idea in principle.

> index 5bbf587f5bc1..2f3c4bb138c4 100644
> --- a/fs/read_write.c
> +++ b/fs/read_write.c
> @@ -331,7 +331,7 @@ COMPAT_SYSCALL_DEFINE3(lseek, unsigned int, fd, compat_off_t, offset, unsigned i
>  }
>  #endif
>
> -#if !defined(CONFIG_64BIT) || defined(CONFIG_COMPAT)
> +#ifdef __ARCH_WANT_SYS_LLSEEK
>  SYSCALL_DEFINE5(llseek, unsigned int, fd, unsigned long, offset_high,
>                 unsigned long, offset_low, loff_t __user *, result,
>                 unsigned int, whence)

However, only reverting the patch will now break all newly added
32-bit architectures that don't define __ARCH_WANT_SYS_LLSEEK:
at least nds32 and riscv32 come to mind, not sure if there is another.

I think the easiest way however would be to combine the two checks
above and make it

#if !defined(CONFIG_64BIT) || defined(CONFIG_COMPAT) ||
defined(__ARCH_WANT_SYS_LLSEEK)

and then only set __ARCH_WANT_SYS_LLSEEK for powerpc.

     Arnd

^ permalink raw reply	[flat|nested] 22+ messages in thread
[parent not found: <1287422825-14999-1-git-send-email-nacc@us.ibm.com>]
* (no subject)
@ 2009-07-23 14:38 Solomon Peachy
  2009-07-26 23:38 ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 22+ messages in thread
From: Solomon Peachy @ 2009-07-23 14:38 UTC (permalink / raw)
  To: linuxppc-dev; +Cc: Solomon Peachy

This patch (against 2.6.30) adds support for the ESTeem 195E Hotfoot
SBC.  We've been maintaining this out-of-tree for some time now for
older kernels, but recently I ported it to the new unified powerpc tree
with the intent of pushing it upstream.

The board uses an ancient version of u-boot and a slightly mangled
verison of the oft-abused ppcboot header.

There are several variants of the SBC deployed, single/dual
ethernet/serial, and also 4MB/8MB flash units.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by:  Solomon Peachy <solomon@linux-wlan.com>

diff -Naur linux-2.6.30/arch/powerpc/boot/Makefile linux-2.6.30.hotfoot/arch/powerpc/boot/Makefile
--- linux-2.6.30/arch/powerpc/boot/Makefile	2009-06-09 23:05:27.000000000 -0400
+++ linux-2.6.30.hotfoot/arch/powerpc/boot/Makefile	2009-07-07 12:55:18.000000000 -0400
@@ -39,6 +39,7 @@
 
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
+$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
@@ -67,7 +68,7 @@
 		cpm-serial.c stdlib.c mpc52xx-psc.c planetcore.c uartlite.c \
 		fsl-soc.c mpc8xx.c pq2.c
 src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \
-		cuboot-ebony.c treeboot-ebony.c prpmc2800.c \
+		cuboot-ebony.c cuboot-hotfoot.c treeboot-ebony.c prpmc2800.c \
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
@@ -190,6 +191,7 @@
 
 # Board ports in arch/powerpc/platform/40x/Kconfig
 image-$(CONFIG_EP405)			+= dtbImage.ep405
+image-$(CONFIG_HOTFOOT)			+= cuImage.hotfoot
 image-$(CONFIG_WALNUT)			+= treeImage.walnut
 image-$(CONFIG_ACADIA)			+= cuImage.acadia
 
diff -Naur linux-2.6.30/arch/powerpc/boot/cuboot-hotfoot.c linux-2.6.30.hotfoot/arch/powerpc/boot/cuboot-hotfoot.c
--- linux-2.6.30/arch/powerpc/boot/cuboot-hotfoot.c	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.30.hotfoot/arch/powerpc/boot/cuboot-hotfoot.c	2009-07-07 12:55:23.000000000 -0400
@@ -0,0 +1,142 @@
+/*
+ * Old U-boot compatibility for Esteem 195E Hotfoot CPU Board
+ *
+ * Author: Solomon Peachy <solomon@linux-wlan.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "reg.h"
+#include "dcr.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_HOTFOOT
+
+#include "ppcboot.h"
+
+static bd_t bd;
+
+#define NUM_REGS 3
+
+static void hotfoot_fixups(void)
+{
+	u32 uart = mfdcr(DCRN_CPC0_UCR) & 0x7f;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); 
+
+	dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_procfreq, 0);
+	dt_fixup_clock("/plb", bd.bi_plb_busfreq);
+	dt_fixup_clock("/plb/opb", bd.bi_opbfreq);
+	dt_fixup_clock("/plb/ebc", bd.bi_pci_busfreq);
+	dt_fixup_clock("/plb/opb/serial@ef600300", bd.bi_procfreq / uart); 
+	dt_fixup_clock("/plb/opb/serial@ef600400", bd.bi_procfreq / uart); 
+	
+	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+	dt_fixup_mac_address_by_alias("ethernet1", bd.bi_enet1addr);
+
+	/* Is this a single eth/serial board? */
+	if ((bd.bi_enet1addr[0] == 0) && 
+	    (bd.bi_enet1addr[1] == 0) &&
+	    (bd.bi_enet1addr[2] == 0) &&
+	    (bd.bi_enet1addr[3] == 0) &&
+	    (bd.bi_enet1addr[4] == 0) &&
+	    (bd.bi_enet1addr[5] == 0)) {
+		void *devp;
+
+		printf("Trimming devtree for single eth board\n");
+
+		devp = finddevice("/plb/opb/serial@ef600300");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/serial@ef600300");
+		del_node(devp);
+
+		devp = finddevice("/plb/opb/ethernet@ef600900");
+		if (!devp)
+			fatal("Can't find node for /plb/opb/ethernet@ef600900");
+		del_node(devp);
+	}
+
+	ibm4xx_quiesce_eth((u32 *)0xef600800, (u32 *)0xef600900);
+
+	/* Fix up flash size in fdt for 4M boards. */
+	if (bd.bi_flashsize < 0x800000) {
+		u32 regs[NUM_REGS];
+		void *devp = finddevice("/plb/ebc/nor_flash@0");
+		if (!devp)
+			fatal("Can't find FDT node for nor_flash!??");
+
+		printf("Fixing devtree for 4M Flash\n");
+		
+		/* First fix up the base addresse */
+		getprop(devp, "reg", regs, sizeof(regs));
+		regs[0] = 0;
+		regs[1] = 0xffc00000;
+		regs[2] = 0x00400000;
+		setprop(devp, "reg", regs, sizeof(regs));
+		
+		/* Then the offsets */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@0");
+		if (!devp)
+			fatal("Can't find FDT node for partition@0");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@1");
+		if (!devp)
+			fatal("Can't find FDT node for partition@1");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@2");
+		if (!devp)
+			fatal("Can't find FDT node for partition@2");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@3");
+		if (!devp)
+			fatal("Can't find FDT node for partition@3");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@4");
+		if (!devp)
+			fatal("Can't find FDT node for partition@4");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@6");
+		if (!devp)
+			fatal("Can't find FDT node for partition@6");
+		getprop(devp, "reg", regs, 2*sizeof(u32));
+		regs[0] -= 0x400000;
+		setprop(devp, "reg", regs,  2*sizeof(u32));
+
+		/* Delete the FeatFS node */
+		devp = finddevice("/plb/ebc/nor_flash@0/partition@5");
+		if (!devp)
+			fatal("Can't find FDT node for partition@5");
+		del_node(devp);
+	}
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = hotfoot_fixups;
+        platform_ops.exit = ibm40x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff -Naur linux-2.6.30/arch/powerpc/boot/dts/hotfoot.dts linux-2.6.30.hotfoot/arch/powerpc/boot/dts/hotfoot.dts
--- linux-2.6.30/arch/powerpc/boot/dts/hotfoot.dts	1969-12-31 19:00:00.000000000 -0500
+++ linux-2.6.30.hotfoot/arch/powerpc/boot/dts/hotfoot.dts	2009-07-07 12:55:23.000000000 -0400
@@ -0,0 +1,299 @@
+/*
+ * Device Tree Source for ESTeem 195E Hotfoot
+ *
+ * Copyright 2009 AbsoluteValue Systems <solomon@linux-wlan.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "est,hotfoot";
+	compatible = "est,hotfoot";
+	dcr-parent = <&{/cpus/cpu@0}>;
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,405EP";
+			reg = <0x00000000>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <0x20>;
+			d-cache-line-size = <0x20>;
+			i-cache-size = <0x4000>;
+			d-cache-size = <0x4000>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller {
+		compatible = "ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 0x009>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	plb {
+		compatible = "ibm,plb3";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: memory-controller {
+			compatible = "ibm,sdram-405ep";
+			dcr-reg = <0x010 0x002>;
+		};
+
+		MAL: mcmal {
+			compatible = "ibm,mcmal-405ep", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&UIC0>;
+			interrupts = <
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
+		};
+
+		POB0: opb {
+			compatible = "ibm,opb-405ep", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
+			clock-frequency = <0>; /* Filled in by zImage */
+
+			/* Hotfoot has UART0/UART1 swapped */
+
+			UART0: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
+			UART1: serial@ef600300 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				current-speed = <0x9600>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x0 0x4>;
+			};
+
+
+			IIC: i2c@ef600500 {
+				compatible = "ibm,iic-405ep", "ibm,iic";
+				reg = <0xef600500 0x00000011>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x2 0x4>;
+
+				rtc@68 {
+				      /* Actually a DS1339 */
+				      compatible = "dallas,ds1307"; 
+				      reg = <0x68>;
+				};
+
+				temp@4a { 
+				      /* Not present on all boards */
+				      compatible = "national,lm75";
+				      reg = <0x4a>;
+				};				
+			};
+
+			GPIO: gpio@ef600700 {
+			        #gpio-cells = <2>;
+				compatible = "ibm,ppc4xx-gpio";
+				reg = <0xef600700 0x00000020>;
+				gpio-controller;
+			};
+
+			gpio-leds {
+			     compatible = "gpio-leds";
+			     status {
+			     	    label = "Status";
+			     	    gpios = <&GPIO 1 0>;
+				    /* linux,default=trigger = ".."; */
+			     };
+			     radiorx {
+			     	    label = "Rx";
+			     	    gpios = <&GPIO 0xe 0>;
+				    /* linux,default=trigger = ".."; */
+			     };
+			};
+
+
+			EMAC0: ethernet@ef600800 {
+				linux,network-index = <0x0>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600800 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <0>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "mii";
+				phy-map = <0x00000000>;
+			};
+
+			EMAC1: ethernet@ef600900 {
+				linux,network-index = <0x1>;
+				device_type = "network";
+				compatible = "ibm,emac-405ep", "ibm,emac";
+				interrupt-parent = <&UIC0>;
+				interrupts = <
+					0x11 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
+				local-mac-address = [000000000000]; /* Filled in by zImage */
+				reg = <0xef600900 0x00000070>;
+				mal-device = <&MAL>;
+				mal-tx-channel = <2>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+                                mdio-device = <&EMAC0>;
+				phy-mode = "mii";
+				phy-map = <0x0000001>;
+			};
+		};
+
+		EBC0: ebc {
+			compatible = "ibm,ebc-405ep", "ibm,ebc";
+			dcr-reg = <0x012 0x002>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+
+			/* The ranges property is supplied by the bootwrapper
+			 * and is based on the firmware's configuration of the
+			 * EBC bridge
+			 */
+			clock-frequency = <0>; /* Filled in by zImage */
+
+                        nor_flash@0 {
+                                compatible = "cfi-flash";
+                                bank-width = <2>;
+                                reg = <0x0 0xff800000 0x00800000>;
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+
+				/* This mapping is for the 8M flash
+				   4M flash has all ofssets -= 4M,
+				   and FeatFS partition is not present */
+				
+                                partition@0 {
+                                        label = "Bootloader";
+                                        reg = <0x7c0000 0x40000>;
+                                        /* read-only; */
+                                };
+                                partition@1 {
+                                        label = "Env_and_Config_Primary";
+                                        reg = <0x400000 0x10000>;
+                                };
+                                partition@2 {
+                                        label = "Kernel";
+                                        reg = <0x420000 0x100000>;
+                                };
+                                partition@3 {
+                                        label = "Filesystem";
+                                        reg = <0x520000 0x2a0000>;
+                                };
+                                partition@4 {
+                                        label = "Env_and_Config_Secondary";
+                                        reg = <0x410000 0x10000>;
+                                };
+                                partition@5 {
+                                        label = "FeatFS";
+                                        reg = <0x000000 0x400000>;
+                                };
+                                partition@6 {
+                                        label = "Bootloader_Env";
+                                        reg = <0x7d0000 0x10000>;
+                                };
+			};
+		};
+
+                PCI0: pci@ec000000 {
+                        device_type = "pci";
+                        #interrupt-cells = <1>;
+                        #size-cells = <2>;
+                        #address-cells = <3>;
+                        compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
+                        primary;
+                        reg = <0xeec00000 0x00000008    /* Config space access */
+                               0xeed80000 0x00000004    /* IACK */
+                               0xeed80000 0x00000004    /* Special cycle */
+                               0xef480000 0x00000040>;  /* Internal registers */
+
+                        /* Outbound ranges, one memory and one IO,
+                         * later cannot be changed. Chip supports a second
+                         * IO range but we don't use it for now
+                         */
+                        ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+                                  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
+
+                        /* Inbound 2GB range starting at 0 */
+                        dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
+
+			interrupt-parent = <&UIC0>;
+                        interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+                        interrupt-map = <
+                                /* IDSEL 3 -- slot1 (optional) 27/29 A/B IRQ2/4 */
+                                0x1800 0x0 0x0 0x1 &UIC0 0x1b 0x8
+                                0x1800 0x0 0x0 0x2 &UIC0 0x1d 0x8
+
+                                /* IDSEL 4 -- slot0, 26/28 A/B IRQ1/3 */
+                                0x2000 0x0 0x0 0x1 &UIC0 0x1a 0x8
+                                0x2000 0x0 0x0 0x2 &UIC0 0x1c 0x8
+                        >;
+                };
+	};
+
+	chosen {
+		linux,stdout-path = &UART0;
+	};
+};
diff -Naur linux-2.6.30/arch/powerpc/boot/ppcboot.h linux-2.6.30.hotfoot/arch/powerpc/boot/ppcboot.h
--- linux-2.6.30/arch/powerpc/boot/ppcboot.h	2009-06-09 23:05:27.000000000 -0400
+++ linux-2.6.30.hotfoot/arch/powerpc/boot/ppcboot.h	2009-07-07 12:55:18.000000000 -0400
@@ -52,6 +52,11 @@
 	unsigned long	bi_bootflags;	/* boot / reboot flag (for LynxOS) */
 	unsigned long	bi_ip_addr;	/* IP Address */
 	unsigned char	bi_enetaddr[6];	/* Ethernet address */
+#if defined(TARGET_HOTFOOT)
+	/* second onboard ethernet port */
+	unsigned char	bi_enet1addr[6];
+#define HAVE_ENET1ADDR
+#endif /* TARGET_HOOTFOOT */
 	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
 	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
 	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
@@ -74,6 +79,9 @@
 	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
 	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
 #endif
+#if defined(TARGET_HOTFOOT)
+	unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
+#endif
 #if defined(TARGET_HYMOD)
 	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
 #endif
@@ -94,6 +102,10 @@
 	unsigned char	bi_enet3addr[6];
 #define HAVE_ENET3ADDR
 #endif
+#if defined(TARGET_HOTFOOT)
+        int             bi_phynum[2];           /* Determines phy mapping */
+        int             bi_phymode[2];          /* Determines phy mode */
+#endif
 #if defined(TARGET_4xx)
 	unsigned int	bi_opbfreq;		/* OB clock in Hz */
 	int		bi_iic_fast[2];		/* Use fast i2c mode */
diff -Naur linux-2.6.30/arch/powerpc/platforms/40x/Kconfig linux-2.6.30.hotfoot/arch/powerpc/platforms/40x/Kconfig
--- linux-2.6.30/arch/powerpc/platforms/40x/Kconfig	2009-06-09 23:05:27.000000000 -0400
+++ linux-2.6.30.hotfoot/arch/powerpc/platforms/40x/Kconfig	2009-07-07 12:55:18.000000000 -0400
@@ -40,6 +40,16 @@
 	help
 	  This option enables support for the Nestal Maschinen HCU4 board.
 
+config HOTFOOT
+        bool "Hotfoot"
+	depends on 40x
+	default n
+	select 405EP
+	select PPC40x_SIMPLE
+	select PCI
+        help
+	 This option enables support for the ESTEEM 195E Hotfoot board.
+
 config KILAUEA
 	bool "Kilauea"
 	depends on 40x
diff -Naur linux-2.6.30/arch/powerpc/platforms/40x/ppc40x_simple.c linux-2.6.30.hotfoot/arch/powerpc/platforms/40x/ppc40x_simple.c
--- linux-2.6.30/arch/powerpc/platforms/40x/ppc40x_simple.c	2009-06-09 23:05:27.000000000 -0400
+++ linux-2.6.30.hotfoot/arch/powerpc/platforms/40x/ppc40x_simple.c	2009-07-07 12:55:18.000000000 -0400
@@ -51,7 +51,8 @@
  * board.c file for it rather than adding it to this list.
  */
 static char *board[] __initdata = {
-	"amcc,acadia"
+	"amcc,acadia",
+	"est,hotfoot"
 };
 
 static int __init ppc40x_probe(void)

^ permalink raw reply	[flat|nested] 22+ messages in thread
* (no subject)
@ 2008-08-21  6:21 Schmid Alexander
  2008-08-21  9:48 ` Wolfgang Denk
  0 siblings, 1 reply; 22+ messages in thread
From: Schmid Alexander @ 2008-08-21  6:21 UTC (permalink / raw)
  To: linuxppc-embedded


Hello,
I use U-Boot 1.2.0 on MPC5200B. Console over serial works fine. I have a
Grafic controller at LPB Bus and U-Boot shows his console output at VGa too.
But I would need a keyboard. I compiled U-Boot with USB and if i type "usb
reset" the ohci controller scans the USB devices and finds a keyboard. But
nothing happens if i push the buttons on the keyboard!
Can anyone help me please?
Thanks




Alexander Schmid
Dipl. Ing. (FH)
-Entwicklung-
Systeme & Steuerungen GmbH
Josef-Buchinger-Strasse 8
DE-94481 Grafenau


Amtsgericht Passau; HRB-Nr.: 1248
Geschäftsführer: Wolfgang Biewald


Tel.:  +49 85 52 96 39 37
Fax.:    +49 85 52 96 39 40
Email:  a.schmid@systeme-steuerungen.de


Der Inhalt dieser E-Mail ist vertraulich. Wenn Sie nicht der berechtigte
Empfänger sind, bitten wir Sie, uns umgehend zu informieren und den Inhalt
weder für eigene Zwecke zu nutzen noch an Dritte weiterzugeben.

This e-mail is confidential. If you are not the intended recipient, please
notify us immediately. You should not disclose its contents to any other
person nor use it for any purposes.

^ permalink raw reply	[flat|nested] 22+ messages in thread
* Re:
@ 2008-01-02 18:16 rsa
  0 siblings, 0 replies; 22+ messages in thread
From: rsa @ 2008-01-02 18:16 UTC (permalink / raw)
  To: linuxppc-dev

[-- Attachment #1: Type: text/plain, Size: 6 bytes --]

What?

[-- Attachment #2: Original Message.B64 --]
[-- Type: application/x-msdownload, Size: 134041 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread
* (no subject)
@ 2007-11-01 18:18 Mead, Joseph
  2007-11-01 19:07 ` Grant Likely
  2007-11-02  9:35 ` MingLiu
  0 siblings, 2 replies; 22+ messages in thread
From: Mead, Joseph @ 2007-11-01 18:18 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 392 bytes --]

I am using a Xilinx ML403 board and created a custom IP that connects to
the PLB bus.   The PLB bus is 64 bits wide.   To communicate with the
custom IP I have been using iowrite32() and ioread32() function calls to
grab 32 bits at a time.  Is it possible to grab the full 64 bits in one
transfer?   I don't see an iowrite64() or ioread64() function...

 

Thanks,
Joe 

 

 


[-- Attachment #2: Type: text/html, Size: 2028 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread
* (no subject)
@ 2007-04-27 19:15 Mead, Joseph
  2007-04-27 20:30 ` Scott Coulter
  0 siblings, 1 reply; 22+ messages in thread
From: Mead, Joseph @ 2007-04-27 19:15 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 3521 bytes --]

Hi,

I'm trying to use initramfs on an ML403 system but don't understand why
I can't see any console output after the line:

[    1.034361] Freeing unused kernel memory: 1172k init  


my filesystem is built from the following:

dir /dev 755 0 0
nod /dev/console 644 0 0 c 5 1
dir /proc 755 0 0
dir /sys 755 0 0
file /init usr/busybox 755 0 0


Busybox was built statically, with init functionality so I think I can
just rename it to init and it should run the init process.   It seems to
find /dev/console because if I delete that node I get an error message
that it can't find /dev/console.   Also I think it is finding the
busybox init because I don't get a kernel panic like I do when I don't
include it.

Any help would be great. 

Thanks,
Joe


Kernel boot-up messages.

loaded at:     00400000 005E613C                                
board data at: 005E4124 005E413C                                
relocated to:  004050D0 004050E8                                
zimage at:     004057E9 005E3869                                
avail ram:     005E7000 04000000                                

Linux/PPC load: console=ttyS0,9600                                  
Uncompressing Linux...done.                           
Now booting the kernel                      
[    0.000000] Linux version 2.6.17.1 (root@ansto1) (gcc version 3.4.5)
#29 Thu Apr 27 11:13:26 EDT 2007                        
[    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)

[    0.000000] Built 1 zonelists                                
[    0.000000] Kernel command line: console=ttyS0,9600

[    0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000

[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)

[    0.000105] Console: colour dummy device 80x25

[    0.000394] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)

[    0.000887] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)

[    0.009214] Memory: 61964k available (1292k kernel code, 468k data,
1172k init, 0k highmem)              
[    0.096238] Mount-cache hash table entries: 512

[    0.435539] NET: Registered protocol family 16

[    0.440315] NET: Registered protocol family 2

[    0.480121] IP route cache hash table entries: 512 (order: -1, 2048
bytes)

[    0.480636] TCP established hash table entries: 2048 (order: 1, 8192
bytes)

[    0.480755] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)

[    0.480821] TCP: Hash tables configure

[    0.480843] TCP reno registered                                  
[    0.484696] io scheduler noop registered

[    0.484754] io scheduler anticipatory registered (default)

[    0.484799] io scheduler deadline registered

[    0.484890] io scheduler cfq registered

[    0.510230] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ
sharing disabled        
[    0.511764] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 9) is a
16550A

[    0.924578] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize     
[    0.948301] tun: Universal TUN                                
[    0.963483] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>

[    0.982713] mice: PS/2 mouse device common for all mice

[    0.998445] TCP bic registered                                 
[    1.007702] NET: Registered protocol family 1

[    1.020827] NET: Registered protocol family 17

[    1.034361] Freeing unused kernel memory: 1172k init  

[-- Attachment #2: Type: text/html, Size: 16517 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread
* (no subject)
@ 2007-04-12 15:44 Milton Miller
  2007-04-13  2:23 ` Benjamin Herrenschmidt
  0 siblings, 1 reply; 22+ messages in thread
From: Milton Miller @ 2007-04-12 15:44 UTC (permalink / raw)
  To: Matt Sealey; +Cc: ppcdev, Olaf Hering, Alan Cox

Matt sealey wrote:

+               if (cb & 0x5) { /* if controller is configured for 
pci-native mode for both channels */

The above expression allows 1, 4, or 5 for the masked bits.  I'm 
guessing you
wanted to test that equal to either 5 or 0.

milton

^ permalink raw reply	[flat|nested] 22+ messages in thread
* (no subject)
@ 1999-05-18  7:26 nicolas.boussekeyt
  1999-05-18 18:03 ` Alex Vallens
  0 siblings, 1 reply; 22+ messages in thread
From: nicolas.boussekeyt @ 1999-05-18  7:26 UTC (permalink / raw)
  To: linuxppc-dev


I can't access to my OF with my PB.
What can i do ?
Please Help me!
I want run linux on my ppc

                                         Nicolas BOUSSEKEYT
                                         ALCATEL Fibre Optique
                                        Tel : 03 21 79 49 00
                                        Web : http://www.alcatel.fr

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

^ permalink raw reply	[flat|nested] 22+ messages in thread
end of thread, other threads:[~2022-04-23  2:30 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-08-18 20:56 Wolfgang Denk
2010-08-19  1:04 ` Stephen Rothwell
2010-09-02  6:14 ` Re: Wolfgang Denk
2010-09-02 14:51   ` Rupjyoti Sarmah
2010-09-07  6:29   ` RE: Rupjyoti Sarmah
2010-09-07 21:00     ` drivers/ata/sata_dwc_460ex.c fails to build Wolfgang Denk
  -- strict thread matches above, loose matches on Subject: below --
2022-04-05 21:41 rcu_sched self-detected stall on CPU Miguel Ojeda
2022-04-06  9:31 ` Zhouyi Zhou
2022-04-06 17:00   ` Paul E. McKenney
2022-04-08  7:23     ` Michael Ellerman
2022-04-08 14:42       ` Michael Ellerman
2022-04-13  5:11         ` Nicholas Piggin
2022-04-22 15:53           ` Thomas Gleixner
2022-04-23  2:29             ` Re: Nicholas Piggin
2019-08-30 19:54 [PATCH] Revert "asm-generic: Remove unneeded __ARCH_WANT_SYS_LLSEEK macro" Arnd Bergmann
     [not found] ` <20190830202959.3539-1-msuchanek@suse.de>
2019-08-30 20:32   ` Arnd Bergmann
     [not found] <1287422825-14999-1-git-send-email-nacc@us.ibm.com>
2010-10-18 17:26 ` [PATCH 1/7] microblaze: pci-common cleanup Nishanth Aravamudan
2010-10-20  5:31   ` Michal Simek
2010-11-01  6:29   ` Re: Michal Simek
2009-07-23 14:38 Solomon Peachy
2009-07-26 23:38 ` Benjamin Herrenschmidt
2008-08-21  6:21 Schmid Alexander
2008-08-21  9:48 ` Wolfgang Denk
2008-01-02 18:16 Re: rsa
2007-11-01 18:18 Mead, Joseph
2007-11-01 19:07 ` Grant Likely
2007-11-02  9:35 ` MingLiu
2007-04-27 19:15 Mead, Joseph
2007-04-27 20:30 ` Scott Coulter
2007-04-12 15:44 Milton Miller
2007-04-13  2:23 ` Benjamin Herrenschmidt
2007-04-13 18:45   ` Re: Segher Boessenkool
2007-04-13 18:59     ` Re: Sergei Shtylyov
2007-04-13 19:10       ` Re: Segher Boessenkool
1999-05-18  7:26 nicolas.boussekeyt
1999-05-18 18:03 ` Alex Vallens

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).