From: acrux <acrux_it@libero.it>
To: linuxppc-dev@lists.ozlabs.org
Subject: ydl powerstation is unable to use external usb hard disk drives
Date: Thu, 10 Feb 2011 20:01:16 +0100 [thread overview]
Message-ID: <20110210200116.0b11baab.acrux_it@libero.it> (raw)
i'm a bit in trouble when i try to use an external usb hard disk drive on
our YDL Powerstation (2x PPC970MP).
Sombody is able to suggest me a solution? Instead, on my iBook G4, everything is working fine.
Actually i don't have another ppc64 to do further attempts.
# YDL Powerstation (Bimini) (kernel linux-2.6.38-rc4)
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb 1-2: New USB device found, idVendor=04b4, idProduct=6830
usb 1-2: New USB device strings: Mfr=0, Product=57, SerialNumber=44
usb 1-2: Product: Cypress AT2LP
usb 1-2: SerialNumber: DEF10CE2CF76
scsi3 : usb-storage 1-2:1.0
scsi 3:0:0:0: Direct-Access ST332062 0A 0000 PQ: 0 ANSI: 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sd 3:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 27 00 00 00
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 3:0:0:0: [sdb] No Caching mode page present
sd 3:0:0:0: [sdb] Assuming drive cache: write through
sd 3:0:0:0: [sdb] Attached SCSI disk
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: New USB device found, idVendor=152d, idProduct=2338
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-2: Product: USB to ATA/ATAPI Bridge
usb 1-2: Manufacturer: JMicron
usb 1-2: SerialNumber: D57CA3932565
scsi4 : usb-storage 1-2:1.0
scsi 4:0:0:0: Direct-Access WDC WD50 00AAKB-00H8A0 4E05 PQ: 0 ANSI: 2 CCS
sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 4:0:0:0: Attached scsi generic sg3 type 0
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 4:0:0:0: [sdb] Asking for cache data failed
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Asking for cache data failed
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 4:0:0:0: [sdb] Asking for cache data failed
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI disk
# iBook G4 12.1" mid2005 (kernel linux-2.6.37)
usb 1-1: new high speed USB device using ehci_hcd and address 12
usb 1-1: New USB device found, idVendor=04b4, idProduct=6830
usb 1-1: New USB device strings: Mfr=0, Product=57, SerialNumber=44
usb 1-1: Product: Cypress AT2LP
usb 1-1: SerialNumber: DEF10CE2CF76
scsi12 : usb-storage 1-1:1.0
scsi 12:0:0:0: Direct-Access ST332062 0A 0000 PQ: 0 ANSI: 0
sd 12:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 12:0:0:0: Attached scsi generic sg2 type 0
sd 12:0:0:0: [sdb] Write Protect is off
sd 12:0:0:0: [sdb] Mode Sense: 27 00 00 00
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 12:0:0:0: [sdb] Assuming drive cache: write through
sd 12:0:0:0: [sdb] Attached SCSI disk
usb 1-1: new high speed USB device using ehci_hcd and address 11
usb 1-1: New USB device found, idVendor=152d, idProduct=2338
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 1-1: Product: USB to ATA/ATAPI Bridge
usb 1-1: Manufacturer: JMicron
usb 1-1: SerialNumber: D57CA3932565
scsi11 : usb-storage 1-1:1.0
scsi 11:0:0:0: Direct-Access WDC WD50 00AAKB-00H8A0 4E05 PQ: 0 ANSI: 2 CCS
sd 11:0:0:0: Attached scsi generic sg2 type 0
sd 11:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 11:0:0:0: [sdb] Write Protect is off
sd 11:0:0:0: [sdb] Mode Sense: 00 38 00 00
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 11:0:0:0: [sdb] Assuming drive cache: write through
sd 11:0:0:0: [sdb] Attached SCSI disk
--
GNU/Linux on Power Architecture
CRUX PPC - http://cruxppc.org/
next reply other threads:[~2011-02-10 19:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-10 19:01 acrux [this message]
-- strict thread matches above, loose matches on Subject: below --
2011-02-10 22:40 ydl powerstation is unable to use external usb hard disk drives nello martuscielli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110210200116.0b11baab.acrux_it@libero.it \
--to=acrux_it@libero.it \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).