From: Grant Likely <grant.likely@secretlab.ca>
To: Heiko Schocher <hs@denx.de>
Cc: linux-fbdev@vger.kernel.org, devicetree-discuss@ozlabs.org,
Samuel Ortiz <sameo@linux.intel.com>,
Vincent Sanders <vince@simtec.co.uk>,
linux-kernel@vger.kernel.org, Ben Dooks <ben@simtec.co.uk>,
Randy Dunlap <rdunlap@xenotime.net>,
Paul Mundt <lethal@linux-sh.org>,
linuxppc-dev@lists.ozlabs.org, Wolfgang Denk <wd@denx.de>
Subject: Re: [PATCH v6 4/6] video, sm501: add OF binding to support SM501
Date: Mon, 2 May 2011 16:28:14 -0600 [thread overview]
Message-ID: <20110502222814.GC15187@ponder.secretlab.ca> (raw)
In-Reply-To: <1300782452-528-5-git-send-email-hs@denx.de>
On Tue, Mar 22, 2011 at 09:27:30AM +0100, Heiko Schocher wrote:
> - add binding to OF, compatible name "smi,sm501"
>
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Merged, thanks.
g.
> cc: Wolfram Sang <w.sang@pengutronix.de>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> cc: linux-fbdev@vger.kernel.org
> cc: devicetree-discuss@ozlabs.org
> cc: Ben Dooks <ben@simtec.co.uk>
> cc: Vincent Sanders <vince@simtec.co.uk>
> cc: Samuel Ortiz <sameo@linux.intel.com>
> cc: linux-kernel@vger.kernel.org
> cc: Randy Dunlap <rdunlap@xenotime.net>
> cc: Wolfgang Denk <wd@denx.de>
> cc: Paul Mundt <lethal@linux-sh.org>
> ---
> - changes since v1:
> add Ben Dooks, Vincent Sanders and Samuel Ortiz to cc, as suggested from
> Paul Mundt.
> - changes since v2:
> add comments from Randy Dunlap:
> - move parameter documentation to Documentation/fb/sm501.txt
> - changes since v3:
> - rebased against v2.6.38-rc2
> - split in 3 patches
> - of support patch
> - get rid of "#if defined(CONFIG_PPC_MPC52xx)" usage
> hide this in DTS, as Paul suggested.
> - i/o routine patch
> - edid support patch
> - changes since v4
> replace remaining CONFIG_PPC_MPC52xx with CONFIG_OF, as
> it is no longer MPC52xx only.
> - changes since v5
> free edid_data after its usage, as it is no longer needed,
> suggested from Paul Mundt. Also fall back to default if
> kmemdup(edid_data) fails.
> - changes for v6:
> - repost complete patchserie
> - rebased against current head
>
> Documentation/powerpc/dts-bindings/sm501.txt | 34 +++++++++++++++++++++++++
> drivers/mfd/sm501.c | 8 +++++-
> drivers/video/sm501fb.c | 35 +++++++++++++++++++++++++-
> 3 files changed, 75 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/powerpc/dts-bindings/sm501.txt
>
> diff --git a/Documentation/powerpc/dts-bindings/sm501.txt b/Documentation/powerpc/dts-bindings/sm501.txt
> new file mode 100644
> index 0000000..7d319fb
> --- /dev/null
> +++ b/Documentation/powerpc/dts-bindings/sm501.txt
> @@ -0,0 +1,34 @@
> +* SM SM501
> +
> +The SM SM501 is a LCD controller, with proper hardware, it can also
> +drive DVI monitors.
> +
> +Required properties:
> +- compatible : should be "smi,sm501".
> +- reg : contain two entries:
> + - First entry: System Configuration register
> + - Second entry: IO space (Display Controller register)
> +- interrupts : SMI interrupt to the cpu should be described here.
> +- interrupt-parent : the phandle for the interrupt controller that
> + services interrupts for this device.
> +
> +Optional properties:
> +- mode : select a video mode:
> + <xres>x<yres>[-<bpp>][@<refresh>]
> +- edid : verbatim EDID data block describing attached display.
> + Data from the detailed timing descriptor will be used to
> + program the display controller.
> +- little-endian: availiable on big endian systems, to
> + set different foreign endian.
> +- big-endian: availiable on little endian systems, to
> + set different foreign endian.
> +
> +Example for MPC5200:
> + display@1,0 {
> + compatible = "smi,sm501";
> + reg = <1 0x00000000 0x00800000
> + 1 0x03e00000 0x00200000>;
> + interrupts = <1 1 3>;
> + mode = "640x480-32@60";
> + edid = [edid-data];
> + };
> diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
> index 558d5f3..574f696 100644
> --- a/drivers/mfd/sm501.c
> +++ b/drivers/mfd/sm501.c
> @@ -1377,7 +1377,7 @@ static int __devinit sm501_init_dev(struct sm501_devdata *sm)
> sm501_register_gpio(sm);
> }
>
> - if (pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> + if (pdata && pdata->gpio_i2c != NULL && pdata->gpio_i2c_nr > 0) {
> if (!sm501_gpio_isregistered(sm))
> dev_err(sm->dev, "no gpio available for i2c gpio.\n");
> else
> @@ -1735,10 +1735,16 @@ static struct pci_driver sm501_pci_driver = {
>
> MODULE_ALIAS("platform:sm501");
>
> +static struct of_device_id __devinitdata of_sm501_match_tbl[] = {
> + { .compatible = "smi,sm501", },
> + { /* end */ }
> +};
> +
> static struct platform_driver sm501_plat_driver = {
> .driver = {
> .name = "sm501",
> .owner = THIS_MODULE,
> + .of_match_table = of_sm501_match_tbl,
> },
> .probe = sm501_plat_probe,
> .remove = sm501_plat_remove,
> diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
> index f31252c..f275385 100644
> --- a/drivers/video/sm501fb.c
> +++ b/drivers/video/sm501fb.c
> @@ -1729,6 +1729,15 @@ static int sm501fb_init_fb(struct fb_info *fb,
> FBINFO_HWACCEL_COPYAREA | FBINFO_HWACCEL_FILLRECT |
> FBINFO_HWACCEL_XPAN | FBINFO_HWACCEL_YPAN;
>
> +#if defined(CONFIG_OF)
> +#ifdef __BIG_ENDIAN
> + if (of_get_property(info->dev->parent->of_node, "little-endian", NULL))
> + fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#else
> + if (of_get_property(info->dev->parent->of_node, "big-endian", NULL))
> + fb->flags |= FBINFO_FOREIGN_ENDIAN;
> +#endif
> +#endif
> /* fixed data */
>
> fb->fix.type = FB_TYPE_PACKED_PIXELS;
> @@ -1933,8 +1942,32 @@ static int __devinit sm501fb_probe(struct platform_device *pdev)
> }
>
> if (info->pdata == NULL) {
> - dev_info(dev, "using default configuration data\n");
> + int found = 0;
> +#if defined(CONFIG_OF)
> + struct device_node *np = pdev->dev.parent->of_node;
> + const u8 *prop;
> + const char *cp;
> + int len;
> +
> info->pdata = &sm501fb_def_pdata;
> + if (np) {
> + /* Get EDID */
> + cp = of_get_property(np, "mode", &len);
> + if (cp)
> + strcpy(fb_mode, cp);
> + prop = of_get_property(np, "edid", &len);
> + if (prop && len == EDID_LENGTH) {
> + info->edid_data = kmemdup(prop, EDID_LENGTH,
> + GFP_KERNEL);
> + if (info->edid_data)
> + found = 1;
> + }
> + }
> +#endif
> + if (!found) {
> + dev_info(dev, "using default configuration data\n");
> + info->pdata = &sm501fb_def_pdata;
> + }
> }
>
> /* probe for the presence of each panel */
> --
> 1.7.4
>
next prev parent reply other threads:[~2011-05-02 22:28 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-04 8:23 [PATCH 1/2] video, sm501: add OF binding to support SM501 Heiko Schocher
2010-12-04 8:23 ` [PATCH 2/2] powerpc, video: add SM501 support for charon board Heiko Schocher
2010-12-07 6:59 ` [PATCH 2/2 v2] " Heiko Schocher
2010-12-11 6:31 ` [PATCH v3 2/2] " Heiko Schocher
2011-01-24 9:57 ` [PATCH 4/4 v4] " Heiko Schocher
2011-01-25 6:45 ` [PATCH 4/4 v5] " Heiko Schocher
2011-01-25 6:49 ` Paul Mundt
2011-01-25 7:07 ` Heiko Schocher
2010-12-08 5:36 ` [PATCH 1/2] video, sm501: add OF binding to support SM501 Paul Mundt
2010-12-09 6:49 ` Heiko Schocher
2010-12-09 15:03 ` Samuel Ortiz
2010-12-11 6:31 ` [PATCH v2 " Heiko Schocher
2010-12-11 18:28 ` Randy Dunlap
2010-12-11 22:34 ` Randy Dunlap
2010-12-13 7:01 ` Heiko Schocher
2011-01-06 4:47 ` Paul Mundt
2011-01-24 9:57 ` [PATCH 1/4 v4] video, sm501: add I/O functions for use on powerpc Heiko Schocher
2011-01-31 10:50 ` Samuel Ortiz
2011-01-24 9:57 ` [PATCH 2/4 v4] video, sm501: add edid and commandline support Heiko Schocher
2011-01-25 7:51 ` Paul Mundt
2011-01-25 8:04 ` Heiko Schocher
2011-01-24 9:57 ` [PATCH 3/4 v4] video, sm501: add OF binding to support SM501 Heiko Schocher
2011-01-25 6:38 ` Paul Mundt
2011-01-31 10:52 ` Samuel Ortiz
2011-01-25 7:20 ` Heiko Schocher
2011-01-25 7:48 ` Paul Mundt
2011-01-25 8:02 ` Heiko Schocher
2011-01-26 7:21 ` [PATCH 2/4 v5] video, sm501: add edid and commandline support Heiko Schocher
2011-01-26 7:21 ` [PATCH 3/4 v5] video, sm501: add OF binding to support SM501 Heiko Schocher
2011-03-15 7:26 ` Heiko Schocher
2011-03-16 15:36 ` Paul Mundt
2011-03-17 6:12 ` Heiko Schocher
2011-03-22 8:20 ` Paul Mundt
2011-03-22 8:25 ` Heiko Schocher
2011-02-06 23:45 ` [PATCH 1/2] " Benjamin Herrenschmidt
2011-03-22 8:27 ` [PATCH v6 0/6] powerpc, 52xx: add charon board support Heiko Schocher
2011-03-22 8:27 ` [PATCH v1 1/6] powerpc, 5200: add support for charon board Heiko Schocher
2011-03-22 9:06 ` Wolfram Sang
2011-03-22 8:27 ` [PATCH v6 2/6] video, sm501: add I/O functions for use on powerpc Heiko Schocher
2011-05-02 22:24 ` Grant Likely
2011-03-22 8:27 ` [PATCH v6 3/6] video, sm501: add edid and commandline support Heiko Schocher
2011-05-02 22:27 ` Grant Likely
2011-05-02 22:37 ` Grant Likely
2011-05-03 5:27 ` Heiko Schocher
2011-05-03 5:43 ` Grant Likely
2011-03-22 8:27 ` [PATCH v6 4/6] video, sm501: add OF binding to support SM501 Heiko Schocher
2011-05-02 22:28 ` Grant Likely [this message]
2011-03-22 8:27 ` [PATCH v6 5/6] powerpc, video: add SM501 support for charon board Heiko Schocher
2011-03-22 8:27 ` [PATCH v6 6/6] powerpc, tqm5200: update tqm5200_defconfig to fit " Heiko Schocher
2011-03-22 9:10 ` Wolfram Sang
2011-05-02 22:31 ` Grant Likely
2011-03-22 20:58 ` [PATCH v6 0/6] powerpc, 52xx: add charon board support Grant Likely
2011-05-02 22:14 ` Grant Likely
2011-05-03 5:17 ` Heiko Schocher
2011-05-03 5:42 ` Grant Likely
2011-05-03 7:24 ` Heiko Schocher
2011-05-03 13:22 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110502222814.GC15187@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=ben@simtec.co.uk \
--cc=devicetree-discuss@ozlabs.org \
--cc=hs@denx.de \
--cc=lethal@linux-sh.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=rdunlap@xenotime.net \
--cc=sameo@linux.intel.com \
--cc=vince@simtec.co.uk \
--cc=wd@denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).