linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Trinabh Gupta <trinabh@linux.vnet.ibm.com>
To: linux-pm@lists.linux-foundation.org, linuxppc-dev@ozlabs.org
Cc: linux-kernel@vger.kernel.org
Subject: [RFC PATCH V1 6/7] cpuidle: (POWER) Enable cpuidle and directly call cpuidle_idle_call() for pSeries
Date: Tue, 07 Jun 2011 22:00:26 +0530	[thread overview]
Message-ID: <20110607163024.6848.22009.stgit@tringupt.in.ibm.com> (raw)
In-Reply-To: <20110607162847.6848.44707.stgit@tringupt.in.ibm.com>

This patch enables cpuidle for pSeries and cpuidle_idle_call() is
directly called from the idle loop. As a result pseries_idle cpuidle
driver registered with cpuidle subsystem comes into action. This patch
also removes the routines pseries_shared_idle_sleep and
pseries_dedicated_idle_sleep as they are now implemented as part of
pseries_idle cpuidle driver.

Signed-off-by: Trinabh Gupta <trinabh@linux.vnet.ibm.com>
Signed-off-by: Arun R Bharadwaj <arun@linux.vnet.ibm.com>
---

 arch/powerpc/platforms/Kconfig         |    6 ++
 arch/powerpc/platforms/pseries/Kconfig |    2 -
 arch/powerpc/platforms/pseries/setup.c |   86 +-------------------------------
 include/linux/cpuidle.h                |    2 -
 4 files changed, 9 insertions(+), 87 deletions(-)

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index f970ca2..80e3592 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -206,6 +206,12 @@ config PPC_PASEMI_CPUFREQ
 
 endmenu
 
+menu "CPUIdle driver"
+
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 config PPC601_SYNC_FIX
 	bool "Workarounds for PPC601 bugs"
 	depends on 6xx && (PPC_PREP || PPC_PMAC)
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 877bac6..9729086 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -121,7 +121,7 @@ config DTL
 
 config PSERIES_IDLE
 	tristate "Cpuidle driver for pSeries platforms"
-	depends on CPU_IDLE
+	select CPU_IDLE
 	depends on PPC_PSERIES
 	default y
 	help
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 6893a0c..75d024b 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -39,6 +39,7 @@
 #include <linux/irq.h>
 #include <linux/seq_file.h>
 #include <linux/root_dev.h>
+#include <linux/cpuidle.h>
 
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -74,9 +75,6 @@ EXPORT_SYMBOL(CMO_PageSize);
 
 int fwnmi_active;  /* TRUE if an FWNMI handler is present */
 
-static void pseries_shared_idle_sleep(void);
-static void pseries_dedicated_idle_sleep(void);
-
 static struct device_node *pSeries_mpic_node;
 
 static void pSeries_show_cpuinfo(struct seq_file *m)
@@ -373,18 +371,9 @@ static void __init pSeries_setup_arch(void)
 
 	pSeries_nvram_init();
 
-	/* Choose an idle loop */
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
 		vpa_init(boot_cpuid);
-		if (get_lppaca()->shared_proc) {
-			printk(KERN_DEBUG "Using shared processor idle loop\n");
-			ppc_md.power_save = pseries_shared_idle_sleep;
-		} else {
-			printk(KERN_DEBUG "Using dedicated idle loop\n");
-			ppc_md.power_save = pseries_dedicated_idle_sleep;
-		}
-	} else {
-		printk(KERN_DEBUG "Using default idle loop\n");
+		ppc_md.power_save = (void *)cpuidle_idle_call;
 	}
 
 	if (firmware_has_feature(FW_FEATURE_LPAR))
@@ -584,77 +573,6 @@ static int __init pSeries_probe(void)
 	return 1;
 }
 
-static void pseries_dedicated_idle_sleep(void)
-{ 
-	unsigned int cpu = smp_processor_id();
-	unsigned long start_snooze;
-	unsigned long in_purr, out_purr;
-	long snooze = __get_cpu_var(smt_snooze_delay);
-
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-	get_lppaca()->donate_dedicated_cpu = 1;
-	in_purr = mfspr(SPRN_PURR);
-
-	/*
-	 * We come in with interrupts disabled, and need_resched()
-	 * has been checked recently.  If we should poll for a little
-	 * while, do so.
-	 */
-	if (snooze) {
-		start_snooze = get_tb() + snooze * tb_ticks_per_usec;
-		local_irq_enable();
-		set_thread_flag(TIF_POLLING_NRFLAG);
-
-		while ((snooze < 0) || (get_tb() < start_snooze)) {
-			if (need_resched() || cpu_is_offline(cpu))
-				goto out;
-			ppc64_runlatch_off();
-			HMT_low();
-			HMT_very_low();
-		}
-
-		HMT_medium();
-		clear_thread_flag(TIF_POLLING_NRFLAG);
-		smp_mb();
-		local_irq_disable();
-		if (need_resched() || cpu_is_offline(cpu))
-			goto out;
-	}
-
-	cede_processor();
-
-out:
-	HMT_medium();
-	out_purr = mfspr(SPRN_PURR);
-	get_lppaca()->wait_state_cycles += out_purr - in_purr;
-	get_lppaca()->donate_dedicated_cpu = 0;
-	get_lppaca()->idle = 0;
-}
-
-static void pseries_shared_idle_sleep(void)
-{
-	/*
-	 * Indicate to the HV that we are idle. Now would be
-	 * a good time to find other work to dispatch.
-	 */
-	get_lppaca()->idle = 1;
-
-	/*
-	 * Yield the processor to the hypervisor.  We return if
-	 * an external interrupt occurs (which are driven prior
-	 * to returning here) or if a prod occurs from another
-	 * processor. When returning here, external interrupts
-	 * are enabled.
-	 */
-	cede_processor();
-
-	get_lppaca()->idle = 0;
-}
-
 static int pSeries_pci_probe_mode(struct pci_bus *bus)
 {
 	if (firmware_has_feature(FW_FEATURE_LPAR))
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index c904188..701bc9b 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -129,7 +129,6 @@ struct cpuidle_driver {
 #ifdef CONFIG_CPU_IDLE
 extern void disable_cpuidle(void);
 extern int cpuidle_idle_call(void);
-
 extern int cpuidle_register_driver(struct cpuidle_driver *drv);
 struct cpuidle_driver *cpuidle_get_driver(void);
 extern void cpuidle_unregister_driver(struct cpuidle_driver *drv);
@@ -144,7 +143,6 @@ extern void cpuidle_disable_device(struct cpuidle_device *dev);
 #else
 static inline void disable_cpuidle(void) { }
 static inline int cpuidle_idle_call(void) { return -ENODEV; }
-
 static inline int cpuidle_register_driver(struct cpuidle_driver *drv)
 {return -ENODEV; }
 static inline struct cpuidle_driver *cpuidle_get_driver(void) {return NULL; }

  parent reply	other threads:[~2011-06-07 16:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-06-07 16:29 [RFC PATCH V1 0/7] cpuidle: (POWER) cpuidle driver for pSeries Trinabh Gupta
2011-06-07 16:29 ` [RFC PATCH V1 1/7] cpuidle: create bootparam "cpuidle.off=1" Trinabh Gupta
2011-06-17  4:29   ` Benjamin Herrenschmidt
2011-06-21  4:36     ` Trinabh Gupta
2011-06-07 16:29 ` [RFC PATCH V1 2/7] cpuidle: replace xen access to x86 pm_idle and default_idle Trinabh Gupta
2011-06-07 16:29 ` [RFC PATCH V1 3/7] cpuidle: stop using pm_idle Trinabh Gupta
2011-08-03 17:45   ` Len Brown
2011-06-07 16:30 ` [RFC PATCH V1 4/7] cpuidle: (powerpc) Add cpu_idle_wait() to allow switching idle routines Trinabh Gupta
2011-06-17  4:32   ` Benjamin Herrenschmidt
2011-06-21  6:00     ` Trinabh Gupta
2011-06-07 16:30 ` [RFC PATCH V1 5/7] cpuidle: (POWER) cpuidle driver for pSeries Trinabh Gupta
2011-06-17  4:36   ` Benjamin Herrenschmidt
2011-06-21  9:00     ` Trinabh Gupta
2011-06-07 16:30 ` Trinabh Gupta [this message]
2011-06-07 16:30 ` [RFC PATCH V1 7/7] cpuidle: (POWER) Handle power_save=off Trinabh Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110607163024.6848.22009.stgit@tringupt.in.ibm.com \
    --to=trinabh@linux.vnet.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).