From: Grant Likely <grant.likely@secretlab.ca>
To: Holger Brunck <holger.brunck@keymile.com>
Cc: spi-devel-general@lists.sourceforge.net, linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH] spi/fsl_spi: fix CPM spi driver
Date: Tue, 5 Jul 2011 12:00:10 -0600 [thread overview]
Message-ID: <20110705180010.GA7393@ponder.secretlab.ca> (raw)
In-Reply-To: <1308587517-20640-1-git-send-email-holger.brunck@keymile.com>
On Mon, Jun 20, 2011 at 06:31:57PM +0200, Holger Brunck wrote:
> This patch fixes the freescale spi driver for CPM. Without this
> patch SPI on CPM failed because cpm_muram_alloc_fixed tries to
> allocate muram in an preserved area. The error reported was:
>
> mpc8xxx_spi f0011a80.spi: can't allocate spi parameter ram
> mpc8xxx_spi: probe of f0011a80.spi failed with error -12
>
> Now the driver uses of_iomap to get access to this area
> similar to i2c driver driver in the i2c-cpm.c which has a
> similar device tree node. This is tested on a MPC8247 with CPM2.
>
> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
> cc: Grant Likely <grant.likely@secretlab.ca>
> cc: spi-devel-general@lists.sourceforge.net
Applied, thanks.
g.
> ---
> This was the same problem reported and discussed on ppc-dev for CPM1:
> http://lists.ozlabs.org/pipermail/linuxppc-dev/2010-September/085739.html
>
> drivers/spi/spi_fsl_spi.c | 28 +++++++++++-----------------
> 1 files changed, 11 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/spi/spi_fsl_spi.c b/drivers/spi/spi_fsl_spi.c
> index 7963c9b..ca57edf 100644
> --- a/drivers/spi/spi_fsl_spi.c
> +++ b/drivers/spi/spi_fsl_spi.c
> @@ -684,7 +684,7 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
> struct device_node *np = dev->of_node;
> const u32 *iprop;
> int size;
> - unsigned long spi_base_ofs;
> + void __iomem *spi_base;
> unsigned long pram_ofs = -ENOMEM;
>
> /* Can't use of_address_to_resource(), QE muram isn't at 0. */
> @@ -702,33 +702,27 @@ static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi)
> return pram_ofs;
> }
>
> - /* CPM1 and CPM2 pram must be at a fixed addr. */
> - if (!iprop || size != sizeof(*iprop) * 4)
> - return -ENOMEM;
> -
> - spi_base_ofs = cpm_muram_alloc_fixed(iprop[2], 2);
> - if (IS_ERR_VALUE(spi_base_ofs))
> - return -ENOMEM;
> + spi_base = of_iomap(np, 1);
> + if (spi_base == NULL)
> + return -EINVAL;
>
> if (mspi->flags & SPI_CPM2) {
> pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> - if (!IS_ERR_VALUE(pram_ofs)) {
> - u16 __iomem *spi_base = cpm_muram_addr(spi_base_ofs);
> -
> - out_be16(spi_base, pram_ofs);
> - }
> + out_be16(spi_base, pram_ofs);
> } else {
> - struct spi_pram __iomem *pram = cpm_muram_addr(spi_base_ofs);
> + struct spi_pram __iomem *pram = spi_base;
> u16 rpbase = in_be16(&pram->rpbase);
>
> /* Microcode relocation patch applied? */
> if (rpbase)
> pram_ofs = rpbase;
> - else
> - return spi_base_ofs;
> + else {
> + pram_ofs = cpm_muram_alloc(SPI_PRAM_SIZE, 64);
> + out_be16(spi_base, pram_ofs);
> + }
> }
>
> - cpm_muram_free(spi_base_ofs);
> + iounmap(spi_base);
> return pram_ofs;
> }
>
> --
> 1.7.1
>
prev parent reply other threads:[~2011-07-05 18:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-06-20 16:31 [PATCH] spi/fsl_spi: fix CPM spi driver Holger Brunck
2011-07-05 14:31 ` Holger Brunck
2011-07-05 18:00 ` Grant Likely
2011-07-05 18:00 ` Grant Likely [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110705180010.GA7393@ponder.secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=holger.brunck@keymile.com \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).