From: Martyn Welch <martyn.welch@ge.com>
To: linuxppc-dev@ozlabs.org, galak@kernel.crashing.org
Subject: [PATCH] powerpc/86xx: Correct Gianfar support for GE boards
Date: Thu, 03 Nov 2011 17:37:47 +0000 [thread overview]
Message-ID: <20111103173726.23924.83647.stgit@ES-BJ21R4J> (raw)
The GE DTBs were not updated when the Gianfar driver was converted to an
of_platform_driver in commit b31a1d8b41513b96e9c7ec2f68c5734cef0b26a4. Update
the DTBs, adding the required TBI entries.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
---
arch/powerpc/boot/dts/gef_ppc9a.dts | 33 +++++++++++++++++++++++++++++----
arch/powerpc/boot/dts/gef_sbc310.dts | 33 +++++++++++++++++++++++++++++----
arch/powerpc/boot/dts/gef_sbc610.dts | 33 +++++++++++++++++++++++++++++----
3 files changed, 87 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts
index 83f4b79..2266bbb 100644
--- a/arch/powerpc/boot/dts/gef_ppc9a.dts
+++ b/arch/powerpc/boot/dts/gef_ppc9a.dts
@@ -269,14 +269,16 @@
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -290,25 +292,48 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts
index fc3a331..429e87d 100644
--- a/arch/powerpc/boot/dts/gef_sbc310.dts
+++ b/arch/powerpc/boot/dts/gef_sbc310.dts
@@ -267,14 +267,16 @@
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -288,25 +290,48 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index c0671cc..d81201a 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -267,14 +267,16 @@
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
+ cell-index = <0>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
+ interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "gmii";
@@ -288,25 +290,48 @@
interrupt-parent = <&gef_pic>;
interrupts = <0x9 0x4>;
reg = <1>;
+ device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupt-parent = <&gef_pic>;
interrupts = <0x8 0x4>;
reg = <3>;
+ device_type = "ethernet-phy";
+ };
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
};
};
};
enet1: ethernet@26000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cell-index = <2>;
device_type = "network";
- model = "eTSEC";
+ model = "TSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
+ ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>;
+ interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "gmii";
+
+ mdio@520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
};
serial0: serial@4500 {
--
Martyn Welch (Principal Software Engineer) | Registered in England and
GE Intelligent Platforms | Wales (3828642) at 100
T +44(0)127322748 | Barbirolli Square, Manchester,
E martyn.welch@ge.com | M2 3AB VAT:GB 927559189
next reply other threads:[~2011-11-03 17:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-03 17:37 Martyn Welch [this message]
2011-11-03 17:59 ` [PATCH] powerpc/86xx: Correct Gianfar support for GE boards Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20111103173726.23924.83647.stgit@ES-BJ21R4J \
--to=martyn.welch@ge.com \
--cc=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox