linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Anton Blanchard <anton@samba.org>
To: benh@kernel.crashing.org, paulus@samba.org, olof@lixom.net,
	michael@ellerman.id.au
Cc: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 2/5] powerpc: iommu: Reduce spinlock coverage in iommu_alloc and iommu_free
Date: Mon, 4 Jun 2012 15:43:02 +1000	[thread overview]
Message-ID: <20120604154302.50647773@kryten> (raw)
In-Reply-To: <20120604154213.173feecb@kryten>


We currently hold the IOMMU spinlock around tce_build and tce_flush.
This causes our spinlock hold times to be much higher than required
and can impact multiqueue adapters.

This patch moves tce_build and tce_flush outside of the lock in
iommu_alloc, and tce_flush outside of the lock in iommu_free.

Some performance numbers were obtained with a Chelsio T3 adapter on
two POWER7 boxes, running a 100 session TCP round robin test.

Performance improved 32% with this patch applied.

Signed-off-by: Anton Blanchard <anton@samba.org>
---

Index: linux-build/arch/powerpc/kernel/iommu.c
===================================================================
--- linux-build.orig/arch/powerpc/kernel/iommu.c	2012-06-04 10:38:38.045211977 +1000
+++ linux-build/arch/powerpc/kernel/iommu.c	2012-06-04 10:38:41.461284266 +1000
@@ -170,13 +170,11 @@ static dma_addr_t iommu_alloc(struct dev
 	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
-
 	entry = iommu_range_alloc(dev, tbl, npages, NULL, mask, align_order);
+	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 
-	if (unlikely(entry == DMA_ERROR_CODE)) {
-		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+	if (unlikely(entry == DMA_ERROR_CODE))
 		return DMA_ERROR_CODE;
-	}
 
 	entry += tbl->it_offset;	/* Offset into real TCE table */
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
@@ -192,9 +190,10 @@ static dma_addr_t iommu_alloc(struct dev
 	 * not altered.
 	 */
 	if (unlikely(build_fail)) {
+		spin_lock_irqsave(&(tbl->it_lock), flags);
 		__iommu_free(tbl, ret, npages);
-
 		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+
 		return DMA_ERROR_CODE;
 	}
 
@@ -202,8 +201,6 @@ static dma_addr_t iommu_alloc(struct dev
 	if (ppc_md.tce_flush)
 		ppc_md.tce_flush(tbl);
 
-	spin_unlock_irqrestore(&(tbl->it_lock), flags);
-
 	/* Make sure updates are seen by hardware */
 	mb();
 
@@ -244,8 +241,8 @@ static void iommu_free(struct iommu_tabl
 	unsigned long flags;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
-
 	__iommu_free(tbl, dma_addr, npages);
+	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 
 	/* Make sure TLB cache is flushed if the HW needs it. We do
 	 * not do an mb() here on purpose, it is not needed on any of
@@ -253,8 +250,6 @@ static void iommu_free(struct iommu_tabl
 	 */
 	if (ppc_md.tce_flush)
 		ppc_md.tce_flush(tbl);
-
-	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
 int iommu_map_sg(struct device *dev, struct iommu_table *tbl,

  reply	other threads:[~2012-06-04  5:43 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-04  5:42 [PATCH 1/5] powerpc/pseries: Disable interrupts around IOMMU percpu data accesses Anton Blanchard
2012-06-04  5:43 ` Anton Blanchard [this message]
2012-06-04  5:43 ` [PATCH 3/5] powerpc: iommu: Reduce spinlock coverage in iommu_free Anton Blanchard
2012-06-04  5:44 ` [PATCH 4/5] powerpc: iommu: Push spinlock into iommu_range_alloc and __iommu_free Anton Blanchard
2012-06-04  5:45 ` [PATCH 5/5] powerpc: iommu: Implement IOMMU pools to improve multiqueue adapter performance Anton Blanchard
2012-06-08  2:43   ` Michael Ellerman
2012-06-08  4:02     ` Anton Blanchard
2012-06-08  4:03       ` Michael Ellerman
2012-06-08  4:14     ` Anton Blanchard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120604154302.50647773@kryten \
    --to=anton@samba.org \
    --cc=benh@kernel.crashing.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=michael@ellerman.id.au \
    --cc=olof@lixom.net \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).