From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, daniel.lezcano@linaro.org,
kernel@vger.kernel.org, scottwood@freescale.com,
linux-pm@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org
Cc: preeti@linux.vnet.ibm.com, dongsheng.wang@freescale.com
Subject: [RFC PATCH V3 4/5] powerpc/cpuidle: Enable powernv cpuidle support.
Date: Mon, 19 Aug 2013 09:58:28 +0530 [thread overview]
Message-ID: <20130819042827.8609.35239.stgit@deepthi.in.ibm.com> (raw)
In-Reply-To: <20130819042736.8609.17890.stgit@deepthi.in.ibm.com>
The following patch extends the current powerpc backend
idle driver to the powernv platform.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
drivers/cpuidle/cpuidle-powerpc.c | 36 +++++++++++++++++++++++++++++++++---
1 file changed, 33 insertions(+), 3 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-powerpc.c b/drivers/cpuidle/cpuidle-powerpc.c
index 5756085..e1cf599 100644
--- a/drivers/cpuidle/cpuidle-powerpc.c
+++ b/drivers/cpuidle/cpuidle-powerpc.c
@@ -53,7 +53,9 @@ static int snooze_loop(struct cpuidle_device *dev,
{
unsigned long in_purr;
- idle_loop_prolog(&in_purr);
+ if (firmware_has_feature(FW_FEATURE_SPLPAR))
+ idle_loop_prolog(&in_purr);
+
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
@@ -67,7 +69,8 @@ static int snooze_loop(struct cpuidle_device *dev,
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb();
- idle_loop_epilog(in_purr);
+ if (firmware_has_feature(FW_FEATURE_SPLPAR))
+ idle_loop_epilog(in_purr);
return index;
}
@@ -130,6 +133,15 @@ static int shared_cede_loop(struct cpuidle_device *dev,
return index;
}
+static int nap_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ ppc64_runlatch_off();
+ power7_idle();
+ return index;
+}
+
/*
* States for dedicated partition case.
*/
@@ -163,6 +175,23 @@ static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
.enter = &shared_cede_loop },
};
+static struct cpuidle_state powernv_states[MAX_IDLE_STATE_COUNT] = {
+ { /* Snooze */
+ .name = "snooze",
+ .desc = "snooze",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &snooze_loop },
+ { /* NAP */
+ .name = "NAP",
+ .desc = "NAP",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 100,
+ .enter = &nap_loop },
+};
+
void update_smt_snooze_delay(int cpu, int residency)
{
struct cpuidle_driver *drv = cpuidle_get_driver();
@@ -282,7 +311,6 @@ static int powerpc_idle_devices_init(void)
return -EIO;
}
}
-
return 0;
}
@@ -309,6 +337,8 @@ static int powerpc_idle_probe(void)
cpuidle_state_table = shared_states;
else if (get_lppaca_is_shared_proc() == 0)
cpuidle_state_table = dedicated_states;
+ } else if (firmware_has_feature(FW_FEATURE_OPALv3)) {
+ cpuidle_state_table = powernv_states;
} else
return -ENODEV;
next prev parent reply other threads:[~2013-08-19 4:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-19 4:27 [RFC PATCH V3 0/5] powerpc/cpuidle: Generic POWERPC cpuidle driver enabled for POWER and POWERNV platforms Deepthi Dharwar
2013-08-19 4:28 ` [RFC PATCH V3 1/5] pseries/cpuidle: Remove dependency of pseries.h file Deepthi Dharwar
2013-08-19 4:28 ` [RFC PATCH V3 2/5] pseries: Move plpar_wrapper.h to powerpc common include/asm location Deepthi Dharwar
2013-08-19 4:28 ` [RFC PATCH V3 3/5] powerpc/cpuidle: Generic powerpc backend cpuidle driver Deepthi Dharwar
2013-08-19 5:52 ` Wang Dongsheng-B40534
2013-08-19 10:18 ` Deepthi Dharwar
2013-08-19 18:17 ` Scott Wood
2013-08-21 4:53 ` Deepthi Dharwar
2013-08-21 20:08 ` Scott Wood
2013-08-22 5:50 ` Deepthi Dharwar
2013-08-22 5:58 ` Benjamin Herrenschmidt
2013-08-22 6:41 ` Deepthi Dharwar
2013-08-22 21:24 ` Scott Wood
2013-08-23 10:11 ` Deepthi Dharwar
2013-08-19 4:28 ` Deepthi Dharwar [this message]
2013-08-19 4:28 ` [RFC PATCH V3 5/5] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130819042827.8609.35239.stgit@deepthi.in.ibm.com \
--to=deepthi@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=daniel.lezcano@linaro.org \
--cc=dongsheng.wang@freescale.com \
--cc=kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=preeti@linux.vnet.ibm.com \
--cc=scottwood@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).