linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: benh@kernel.crashing.org, daniel.lezcano@linaro.org,
	linux-kernel@vger.kernel.org, scottwood@freescale.com,
	linux-pm@lists.linux-foundation.org,
	linuxppc-dev@lists.ozlabs.org
Cc: preeti@linux.vnet.ibm.com, dongsheng.wang@freescale.com
Subject: [PATCH V5 4/5] POWER/cpuidle: Enable powernv cpuidle support.
Date: Thu, 22 Aug 2013 15:24:25 +0530	[thread overview]
Message-ID: <20130822095422.27416.94236.stgit@deepthi.in.ibm.com> (raw)
In-Reply-To: <20130822095323.27416.79369.stgit@deepthi.in.ibm.com>

The following patch extends the current power backend
idle driver to the powernv platform.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
 drivers/cpuidle/cpuidle-ibm-power.c |   37 ++++++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
index 4ee5a94..de5e837 100644
--- a/drivers/cpuidle/cpuidle-ibm-power.c
+++ b/drivers/cpuidle/cpuidle-ibm-power.c
@@ -50,9 +50,11 @@ static int snooze_loop(struct cpuidle_device *dev,
 			struct cpuidle_driver *drv,
 			int index)
 {
-	unsigned long in_purr;
+	unsigned long in_purr = 0;
+
+	if (firmware_has_feature(FW_FEATURE_SPLPAR))
+		idle_loop_prolog(&in_purr);
 
-	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
@@ -66,7 +68,8 @@ static int snooze_loop(struct cpuidle_device *dev,
 	clear_thread_flag(TIF_POLLING_NRFLAG);
 	smp_mb();
 
-	idle_loop_epilog(in_purr);
+	if (firmware_has_feature(FW_FEATURE_SPLPAR))
+		idle_loop_epilog(in_purr);
 
 	return index;
 }
@@ -129,6 +132,15 @@ static int shared_cede_loop(struct cpuidle_device *dev,
 	return index;
 }
 
+static int nap_loop(struct cpuidle_device *dev,
+			struct cpuidle_driver *drv,
+			int index)
+{
+	ppc64_runlatch_off();
+	power7_idle();
+	return index;
+}
+
 /*
  * States for dedicated partition case.
  */
@@ -162,6 +174,23 @@ static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
 		.enter = &shared_cede_loop },
 };
 
+static struct cpuidle_state powernv_states[MAX_IDLE_STATE_COUNT] = {
+	{ /* Snooze */
+		.name = "snooze",
+		.desc = "snooze",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 0,
+		.target_residency = 0,
+		.enter = &snooze_loop },
+	{ /* NAP */
+		.name = "NAP",
+		.desc = "NAP",
+		.flags = CPUIDLE_FLAG_TIME_VALID,
+		.exit_latency = 10,
+		.target_residency = 100,
+		.enter = &nap_loop },
+};
+
 void update_smt_snooze_delay(int cpu, int residency)
 {
 	struct cpuidle_driver *drv = cpuidle_get_driver();
@@ -261,6 +290,8 @@ static int power_idle_probe(void)
 			cpuidle_state_table = shared_states;
 		else
 			cpuidle_state_table = dedicated_states;
+	} else if (firmware_has_feature(FW_FEATURE_OPALv3)) {
+		cpuidle_state_table = powernv_states;
 	} else
 		return -ENODEV;
 

  parent reply	other threads:[~2013-08-22  9:55 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-22  9:53 [PATCH V5 0/5] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms Deepthi Dharwar
2013-08-22  9:53 ` [PATCH V5 1/5] pseries/cpuidle: Remove dependency of pseries.h file Deepthi Dharwar
2013-08-22  9:53 ` [PATCH V5 2/5] pseries: Move plpar_wrapper.h to powerpc common include/asm location Deepthi Dharwar
2013-08-22  9:54 ` [PATCH V5 3/5] POWER/cpuidle: Generic IBM-POWER backend cpuidle driver Deepthi Dharwar
2013-08-23  3:16   ` Wang Dongsheng-B40534
2013-08-23 10:32     ` Deepthi Dharwar
2013-08-23 11:55     ` Deepthi Dharwar
2013-08-22  9:54 ` Deepthi Dharwar [this message]
2013-08-22  9:54 ` [PATCH V5 5/5] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130822095422.27416.94236.stgit@deepthi.in.ibm.com \
    --to=deepthi@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=dongsheng.wang@freescale.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@lists.linux-foundation.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=preeti@linux.vnet.ibm.com \
    --cc=scottwood@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).