From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: linux-pm@lists.linux-foundation.org,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Cc: b.zolnierkie@samsung.com, daniel.lezcano@linaro.org,
dongsheng.wang@freescale.com, preeti@linux.vnet.ibm.com,
srivatsa.bhat@linux.vnet.ibm.com, scottwood@freescale.com
Subject: [PATCH V6 6/7] POWER/cpuidle: Enable powernv cpuidle support.
Date: Wed, 28 Aug 2013 00:01:47 +0530 [thread overview]
Message-ID: <20130827183145.18579.9940.stgit@deepthi.in.ibm.com> (raw)
In-Reply-To: <20130827183016.18579.16595.stgit@deepthi.in.ibm.com>
The following patch extends the current power backend
idle driver to the powernv platform.
Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
drivers/cpuidle/cpuidle-ibm-power.c | 39 ++++++++++++++++++++++++++++++++---
1 file changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/cpuidle/cpuidle-ibm-power.c b/drivers/cpuidle/cpuidle-ibm-power.c
index 162deda..f8905c3 100644
--- a/drivers/cpuidle/cpuidle-ibm-power.c
+++ b/drivers/cpuidle/cpuidle-ibm-power.c
@@ -48,9 +48,10 @@ static int snooze_loop(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index)
{
- unsigned long in_purr;
+ unsigned long in_purr = 0;
- idle_loop_prolog(&in_purr);
+ if (firmware_has_feature(FW_FEATURE_SPLPAR))
+ idle_loop_prolog(&in_purr);
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
@@ -64,7 +65,8 @@ static int snooze_loop(struct cpuidle_device *dev,
clear_thread_flag(TIF_POLLING_NRFLAG);
smp_mb();
- idle_loop_epilog(in_purr);
+ if (firmware_has_feature(FW_FEATURE_SPLPAR))
+ idle_loop_epilog(in_purr);
return index;
}
@@ -128,6 +130,15 @@ static int shared_cede_loop(struct cpuidle_device *dev,
return index;
}
+static int nap_loop(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ ppc64_runlatch_off();
+ power7_idle();
+ return index;
+}
+
/*
* States for dedicated partition case.
*/
@@ -161,6 +172,23 @@ static struct cpuidle_state shared_states[] = {
.enter = &shared_cede_loop },
};
+static struct cpuidle_state powernv_states[] = {
+ { /* Snooze */
+ .name = "snooze",
+ .desc = "snooze",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 0,
+ .target_residency = 0,
+ .enter = &snooze_loop },
+ { /* NAP */
+ .name = "NAP",
+ .desc = "NAP",
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .exit_latency = 10,
+ .target_residency = 100,
+ .enter = &nap_loop },
+};
+
void update_smt_snooze_delay(int cpu, int residency)
{
struct cpuidle_driver *drv = cpuidle_get_driver();
@@ -254,6 +282,11 @@ static int power_idle_probe(void)
cpuidle_state_table = dedicated_states;
max_idle_state = ARRAY_SIZE(dedicated_states);
}
+
+ } else if (firmware_has_feature(FW_FEATURE_OPALv3)) {
+ cpuidle_state_table = powernv_states;
+ max_idle_state = ARRAY_SIZE(powernv_states);
+
} else
return -ENODEV;
next prev parent reply other threads:[~2013-08-27 18:32 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-27 18:30 [PATCH V6 0/7] POWER/cpuidle: Generic IBM-POWER cpuidle driver enabled for PSERIES and POWERNV platforms Deepthi Dharwar
2013-08-27 18:30 ` [PATCH V6 1/7] pseries/cpuidle: Move processor_idle.c to drivers/cpuidle Deepthi Dharwar
2013-08-27 18:31 ` [PATCH V6 2/7] pseries/cpuidle: Use cpuidle_register() for initialisation Deepthi Dharwar
2013-08-27 18:31 ` [PATCH V6 3/7] pseries/cpuidle: Make pseries_idle backend driver a non-module Deepthi Dharwar
2013-08-27 18:31 ` [PATCH V6 4/7] pseries/cpuidle: Remove MAX_IDLE_STATE macro Deepthi Dharwar
2013-08-27 18:31 ` [PATCH V6 5/7] POWER/cpuidle: Generic POWER CPUIDLE driver supporting PSERIES Deepthi Dharwar
2013-08-27 18:31 ` Deepthi Dharwar [this message]
2013-08-27 18:32 ` [PATCH V6 7/7] powernv/cpuidle: Enable idle powernv cpu to call into the cpuidle framework Deepthi Dharwar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130827183145.18579.9940.stgit@deepthi.in.ibm.com \
--to=deepthi@linux.vnet.ibm.com \
--cc=b.zolnierkie@samsung.com \
--cc=daniel.lezcano@linaro.org \
--cc=dongsheng.wang@freescale.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=preeti@linux.vnet.ibm.com \
--cc=scottwood@freescale.com \
--cc=srivatsa.bhat@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).