linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
To: linux-pm@vger.kernel.org, benh@kernel.crashing.org,
	daniel.lezcano@linaro.org, linux-kernel@vger.kernel.org,
	srivatsa.bhat@linux.vnet.ibm.com, preeti@linux.vnet.ibm.com,
	svaidy@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v1 3/6] pseries/cpuidle: Use cpuidle_register() for initialisation.
Date: Tue, 14 Jan 2014 16:26:09 +0530	[thread overview]
Message-ID: <20140114105607.3064.15745.stgit@deepthi.in.ibm.com> (raw)
In-Reply-To: <20140114105525.3064.52013.stgit@deepthi.in.ibm.com>

This patch replaces the cpuidle driver and devices initialisation
calls with a single generic cpuidle_register() call
and also includes minor refactoring of the code around it.

Remove the cpu online check in snooze loop, as this code can
only locally run on a cpu only if it is online. Therefore,
this check is not required.

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
---
 drivers/cpuidle/cpuidle-pseries.c |   78 +++++--------------------------------
 1 file changed, 11 insertions(+), 67 deletions(-)

diff --git a/drivers/cpuidle/cpuidle-pseries.c b/drivers/cpuidle/cpuidle-pseries.c
index 2115478..32d86bc 100644
--- a/drivers/cpuidle/cpuidle-pseries.c
+++ b/drivers/cpuidle/cpuidle-pseries.c
@@ -27,7 +27,6 @@ struct cpuidle_driver pseries_idle_driver = {
 #define MAX_IDLE_STATE_COUNT	2
 
 static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;
-static struct cpuidle_device __percpu *pseries_cpuidle_devices;
 static struct cpuidle_state *cpuidle_state_table;
 
 static inline void idle_loop_prolog(unsigned long *in_purr)
@@ -55,13 +54,12 @@ static int snooze_loop(struct cpuidle_device *dev,
 			int index)
 {
 	unsigned long in_purr;
-	int cpu = dev->cpu;
 
 	idle_loop_prolog(&in_purr);
 	local_irq_enable();
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
-	while ((!need_resched()) && cpu_online(cpu)) {
+	while (!need_resched()) {
 		HMT_low();
 		HMT_very_low();
 	}
@@ -188,7 +186,7 @@ static int pseries_cpuidle_add_cpu_notifier(struct notifier_block *n,
 {
 	int hotcpu = (unsigned long)hcpu;
 	struct cpuidle_device *dev =
-			per_cpu_ptr(pseries_cpuidle_devices, hotcpu);
+				per_cpu(cpuidle_devices, hotcpu);
 
 	if (dev && cpuidle_get_driver()) {
 		switch (action) {
@@ -245,50 +243,6 @@ static int pseries_cpuidle_driver_init(void)
 	return 0;
 }
 
-/* pseries_idle_devices_uninit(void)
- * unregister cpuidle devices and de-allocate memory
- */
-static void pseries_idle_devices_uninit(void)
-{
-	int i;
-	struct cpuidle_device *dev;
-
-	for_each_possible_cpu(i) {
-		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
-		cpuidle_unregister_device(dev);
-	}
-
-	free_percpu(pseries_cpuidle_devices);
-	return;
-}
-
-/* pseries_idle_devices_init()
- * allocate, initialize and register cpuidle device
- */
-static int pseries_idle_devices_init(void)
-{
-	int i;
-	struct cpuidle_driver *drv = &pseries_idle_driver;
-	struct cpuidle_device *dev;
-
-	pseries_cpuidle_devices = alloc_percpu(struct cpuidle_device);
-	if (pseries_cpuidle_devices == NULL)
-		return -ENOMEM;
-
-	for_each_possible_cpu(i) {
-		dev = per_cpu_ptr(pseries_cpuidle_devices, i);
-		dev->state_count = drv->state_count;
-		dev->cpu = i;
-		if (cpuidle_register_device(dev)) {
-			printk(KERN_DEBUG \
-				"cpuidle_register_device %d failed!\n", i);
-			return -EIO;
-		}
-	}
-
-	return 0;
-}
-
 /*
  * pseries_idle_probe()
  * Choose state table for shared versus dedicated partition
@@ -296,9 +250,6 @@ static int pseries_idle_devices_init(void)
 static int pseries_idle_probe(void)
 {
 
-	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
-		return -ENODEV;
-
 	if (cpuidle_disable != IDLE_NO_OVERRIDE)
 		return -ENODEV;
 
@@ -307,10 +258,13 @@ static int pseries_idle_probe(void)
 		return -EPERM;
 	}
 
-	if (lppaca_shared_proc(get_lppaca()))
-		cpuidle_state_table = shared_states;
-	else
-		cpuidle_state_table = dedicated_states;
+	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		if (lppaca_shared_proc(get_lppaca()))
+			cpuidle_state_table = shared_states;
+		else
+			cpuidle_state_table = dedicated_states;
+	} else
+		return -ENODEV;
 
 	return 0;
 }
@@ -324,22 +278,14 @@ static int __init pseries_processor_idle_init(void)
 		return retval;
 
 	pseries_cpuidle_driver_init();
-	retval = cpuidle_register_driver(&pseries_idle_driver);
+	retval = cpuidle_register(&pseries_idle_driver, NULL);
 	if (retval) {
 		printk(KERN_DEBUG "Registration of pseries driver failed.\n");
 		return retval;
 	}
 
-	retval = pseries_idle_devices_init();
-	if (retval) {
-		pseries_idle_devices_uninit();
-		cpuidle_unregister_driver(&pseries_idle_driver);
-		return retval;
-	}
-
 	register_cpu_notifier(&setup_hotplug_notifier);
 	printk(KERN_DEBUG "pseries_idle_driver registered\n");
-
 	return 0;
 }
 
@@ -347,9 +293,7 @@ static void __exit pseries_processor_idle_exit(void)
 {
 
 	unregister_cpu_notifier(&setup_hotplug_notifier);
-	pseries_idle_devices_uninit();
-	cpuidle_unregister_driver(&pseries_idle_driver);
-
+	cpuidle_unregister(&pseries_idle_driver);
 	return;
 }
 

  parent reply	other threads:[~2014-01-14 10:55 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-14 10:55 [PATCH v1 0/6] pseries/cpuidle: pseries cpuidle backend driver clean-ups Deepthi Dharwar
2014-01-14 10:55 ` [PATCH v1 1/6] pseries/cpuidle: Remove redundant call to ppc64_runlatch_off() in cpu idle routines Deepthi Dharwar
2014-01-14 10:56 ` [PATCH v1 2/6] pseries/cpuidle: Move processor_idle.c to drivers/cpuidle Deepthi Dharwar
2014-01-14 10:56 ` Deepthi Dharwar [this message]
2014-01-14 10:56 ` [PATCH v1 4/6] pseries/cpuidle: Make cpuidle-pseries backend driver a non-module Deepthi Dharwar
2014-01-14 10:56 ` [PATCH v1 5/6] pseries/cpuidle: Remove MAX_IDLE_STATE macro Deepthi Dharwar
2014-01-14 10:56 ` [PATCH v1 6/6] pseries/cpuidle: smt-snooze-delay cleanup Deepthi Dharwar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140114105607.3064.15745.stgit@deepthi.in.ibm.com \
    --to=deepthi@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=preeti@linux.vnet.ibm.com \
    --cc=srivatsa.bhat@linux.vnet.ibm.com \
    --cc=svaidy@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).