[PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[Brian Norris]

Hi all,

We are introducing a new SPI-NOR library/framework for MTD, to support various
types of SPI-NOR flash controllers which require (or benefit from) intimate
knowledge of the flash interface, rather than just the relatively dumb SPI
interface. This library borrows much of the m25p80 driver for its abstraction
and moves this code into a spi-nor module.

This means CONFIG_M25P80 now has a dependency on CONFIG_MTD_SPI_NOR, which
should be added to the defconfigs. I'm not sure what is the best process for
doing this. Should each $ARCH maintainer just take their respective patch, even
if the MTD_SPI_NOR Kconfig symbol is not defined for them yet? Or should
maintainers plan on merging the relevant SPI-NOR code into their trees during
the development cycle? Or some third option?

Anyway, the patches are here. Please keep general comments to the cover letter,
so all parties can see.

This series is based on the development repo for MTD, in the 'spinor' branch:

  git://git.infradead.org/l2-mtd.git +spinor

This series is available in the same repo at:

  git://git.infradead.org/l2-mtd.git +defconfigs

I tried locally merging this into linux-next and saw a trivial conflict in
arch/arm/configs/shmobile_defconfig. I can resubmit based on an appropriate
tree, if requested.

Thanks,
Brian

P.S. I was going to purely automatically generate this diff as follows, but
it generated a lot of defconfig noise:

	#!/bin/sh
	for i in arm blackfin mips powerpc sh
	do 
		for j in `git grep -l M25P80 arch/$i/configs`
		do 
			echo $j
			cp $j .config
			echo CONFIG_MTD_SPI_NOR=y >> .config
			make ARCH=$i savedefconfig
			mv defconfig $j
		done
	done

So I did a mixed approach, where I filtered most of the noise out of the diff.

Brian Norris (5):
  ARM: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  blackfin: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  mips: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)
  sh: defconfig: add MTD_SPI_NOR (new dependency for M25P80)

 arch/arm/configs/bockw_defconfig               | 2 +-
 arch/arm/configs/dove_defconfig                | 2 +-
 arch/arm/configs/imx_v6_v7_defconfig           | 1 +
 arch/arm/configs/keystone_defconfig            | 1 +
 arch/arm/configs/kirkwood_defconfig            | 1 +
 arch/arm/configs/koelsch_defconfig             | 1 +
 arch/arm/configs/lager_defconfig               | 1 +
 arch/arm/configs/lpc32xx_defconfig             | 2 +-
 arch/arm/configs/multi_v5_defconfig            | 1 +
 arch/arm/configs/multi_v7_defconfig            | 1 +
 arch/arm/configs/mvebu_v5_defconfig            | 1 +
 arch/arm/configs/mvebu_v7_defconfig            | 1 +
 arch/arm/configs/mxs_defconfig                 | 1 +
 arch/arm/configs/sama5_defconfig               | 2 +-
 arch/arm/configs/shmobile_defconfig            | 1 +
 arch/arm/configs/tegra_defconfig               | 1 +
 arch/blackfin/configs/BF526-EZBRD_defconfig    | 2 +-
 arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 2 +-
 arch/blackfin/configs/BF527-EZKIT_defconfig    | 2 +-
 arch/blackfin/configs/BF548-EZKIT_defconfig    | 2 +-
 arch/blackfin/configs/BF609-EZKIT_defconfig    | 2 +-
 arch/blackfin/configs/BlackStamp_defconfig     | 3 +--
 arch/blackfin/configs/H8606_defconfig          | 3 +--
 arch/mips/configs/ath79_defconfig              | 3 +--
 arch/mips/configs/db1xxx_defconfig             | 1 +
 arch/mips/configs/rt305x_defconfig             | 2 +-
 arch/powerpc/configs/corenet32_smp_defconfig   | 2 +-
 arch/powerpc/configs/corenet64_smp_defconfig   | 2 +-
 arch/powerpc/configs/mpc85xx_defconfig         | 2 +-
 arch/powerpc/configs/mpc85xx_smp_defconfig     | 2 +-
 arch/sh/configs/sh7757lcr_defconfig            | 2 +-
 31 files changed, 31 insertions(+), 21 deletions(-)

-- 
1.8.3.2

[PATCH 4/5] powerpc: defconfigs: add MTD_SPI_NOR (new dependency for M25P80)

[Brian Norris]

These defconfigs contain the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to the
relevant defconfigs.

At the same time, drop the now-nonexistent CONFIG_MTD_CHAR symbol.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
---
This change is based on l2-mtd.git/spinor, which is based on 3.15-rc1:

  git://git.infradead.org/l2-mtd.git +spinor

 arch/powerpc/configs/corenet32_smp_defconfig | 2 +-
 arch/powerpc/configs/corenet64_smp_defconfig | 2 +-
 arch/powerpc/configs/mpc85xx_defconfig       | 2 +-
 arch/powerpc/configs/mpc85xx_smp_defconfig   | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/configs/corenet32_smp_defconfig b/arch/powerpc/configs/corenet32_smp_defconfig
index bbd794deb6eb..fceaa893d37c 100644
--- a/arch/powerpc/configs/corenet32_smp_defconfig
+++ b/arch/powerpc/configs/corenet32_smp_defconfig
@@ -69,7 +69,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_AMDSTD=y
@@ -78,6 +77,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
diff --git a/arch/powerpc/configs/corenet64_smp_defconfig b/arch/powerpc/configs/corenet64_smp_defconfig
index 5c7fa19ae4ef..9c8d58a50df2 100644
--- a/arch/powerpc/configs/corenet64_smp_defconfig
+++ b/arch/powerpc/configs/corenet64_smp_defconfig
@@ -61,7 +61,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
@@ -82,6 +81,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 19f0fbe5ba4b..33d9c8aef4eb 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -83,7 +83,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
@@ -104,6 +103,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 062312e1fe1a..25174f9a6615 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -86,7 +86,6 @@ CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_OF_PARTS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_FTL=y
@@ -107,6 +106,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
 CONFIG_MTD_UBI_BEB_RESERVE=1
-- 
1.8.3.2

Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 702 bytes --]

On Thu, Apr 17, 2014 at 12:21:44AM -0700, Brian Norris wrote:
> Hi all,
> 
> We are introducing a new SPI-NOR library/framework for MTD, to support various
> types of SPI-NOR flash controllers which require (or benefit from) intimate
> knowledge of the flash interface, rather than just the relatively dumb SPI
> interface. This library borrows much of the m25p80 driver for its abstraction
> and moves this code into a spi-nor module.

If this is a common library, then the more common approach to solve this
would be to have each driver that uses it to select MTD_SPI_NOR rather
than depend on it. That way you can drop this whole series to update the
default configurations.

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[Brian Norris]

Hi,

On Thu, Apr 17, 2014 at 12:53:03PM +0200, Thierry Reding wrote:
> On Thu, Apr 17, 2014 at 12:21:44AM -0700, Brian Norris wrote:
> > We are introducing a new SPI-NOR library/framework for MTD, to support various
> > types of SPI-NOR flash controllers which require (or benefit from) intimate
> > knowledge of the flash interface, rather than just the relatively dumb SPI
> > interface. This library borrows much of the m25p80 driver for its abstraction
> > and moves this code into a spi-nor module.
> 
> If this is a common library, then the more common approach to solve this
> would be to have each driver that uses it to select MTD_SPI_NOR rather
> than depend on it. That way you can drop this whole series to update the
> default configurations.

But does MTD_SPI_NOR (and drivers/mtd/spi-nor/) qualify as a "library"
or as a "subsystem"? I thought the latter were typically expected to be
user-selectable options, not automatically-"select"ed.

I would say that, except for its age, MTD_SPI_NOR is very similar in to
MTD_NAND (driver/mtd/nand/), which I'd consider a kind of subsystem, and
which users must select before they are asked about drivers which fall
under its category.

Perhaps my usage of the word "library" in the description was a mistake,
as I don't exactly consider it like a library in the sense of many other
"select"ed libraries.

Brian

Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[Marek Vasut]

On Friday, April 18, 2014 at 08:30:54 AM, Brian Norris wrote:
> Hi,
> 
> On Thu, Apr 17, 2014 at 12:53:03PM +0200, Thierry Reding wrote:
> > On Thu, Apr 17, 2014 at 12:21:44AM -0700, Brian Norris wrote:
> > > We are introducing a new SPI-NOR library/framework for MTD, to support
> > > various types of SPI-NOR flash controllers which require (or benefit
> > > from) intimate knowledge of the flash interface, rather than just the
> > > relatively dumb SPI interface. This library borrows much of the m25p80
> > > driver for its abstraction and moves this code into a spi-nor module.
> > 
> > If this is a common library, then the more common approach to solve this
> > would be to have each driver that uses it to select MTD_SPI_NOR rather
> > than depend on it. That way you can drop this whole series to update the
> > default configurations.
> 
> But does MTD_SPI_NOR (and drivers/mtd/spi-nor/) qualify as a "library"
> or as a "subsystem"? I thought the latter were typically expected to be
> user-selectable options, not automatically-"select"ed.

I agree the "subsystem" is user-selectable while the "library" is to be 
'select'ed .

> I would say that, except for its age, MTD_SPI_NOR is very similar in to
> MTD_NAND (driver/mtd/nand/), which I'd consider a kind of subsystem, and
> which users must select before they are asked about drivers which fall
> under its category.
> 
> Perhaps my usage of the word "library" in the description was a mistake,
> as I don't exactly consider it like a library in the sense of many other
> "select"ed libraries.

It did look like a library to me at first, but it's rather a subsystem that 
contains a small library in it. Thus, I retract my previous comment about using 
'select' and add :

Acked-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut

Re: [PATCH 0/5] defconfigs: add MTD_SPI_NOR (dependency for M25P80)

[Marek Vasut]

On Thursday, April 17, 2014 at 09:21:44 AM, Brian Norris wrote:
> Hi all,
> 
> We are introducing a new SPI-NOR library/framework for MTD, to support
> various types of SPI-NOR flash controllers which require (or benefit from)
> intimate knowledge of the flash interface, rather than just the relatively
> dumb SPI interface. This library borrows much of the m25p80 driver for its
> abstraction and moves this code into a spi-nor module.
> 
> This means CONFIG_M25P80 now has a dependency on CONFIG_MTD_SPI_NOR, which
> should be added to the defconfigs. I'm not sure what is the best process
> for doing this. Should each $ARCH maintainer just take their respective
> patch, even if the MTD_SPI_NOR Kconfig symbol is not defined for them yet?
> Or should maintainers plan on merging the relevant SPI-NOR code into their
> trees during the development cycle? Or some third option?

Shouldn't the M25P80 driver just "select" the SPI NOR framework? Then you won't 
need the adjustment to defconfigs at all I think.

Best regards,
Marek Vasut