linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Wei Yang <weiyang@linux.vnet.ibm.com>
To: Gavin Shan <gwshan@linux.vnet.ibm.com>
Cc: Wei Yang <weiyang@linux.vnet.ibm.com>,
	benh@au1.ibm.com, linux-pci@vger.kernel.org,
	yan@linux.vnet.ibm.com, bhelgaas@google.com,
	qiudayu@linux.vnet.ibm.com, linuxppc-dev@lists.ozlabs.org
Subject: Re: [RFC PATCH V3 04/17] PCI: SRIOV: add VF enable/disable hook
Date: Mon, 23 Jun 2014 14:29:53 +0800	[thread overview]
Message-ID: <20140623062953.GB5172@richard> (raw)
In-Reply-To: <20140623050310.GA5069@shangw>

On Mon, Jun 23, 2014 at 03:03:10PM +1000, Gavin Shan wrote:
>On Tue, Jun 10, 2014 at 09:56:26AM +0800, Wei Yang wrote:
>>VFs are dynamically created/released when driver enable them. On some
>>platforms, like PowerNV, special resources are necessary to enable VFs.
>>
>>This patch adds two hooks for platform initialization before creating the VFs.
>>
>>Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>>---
>> drivers/pci/iov.c |   19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>>diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>>index 1d21f43..cc87773 100644
>>--- a/drivers/pci/iov.c
>>+++ b/drivers/pci/iov.c
>>@@ -250,6 +250,11 @@ static void sriov_disable_migration(struct pci_dev *dev)
>> 	iounmap(iov->mstate);
>> }
>>
>>+int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 vf_num)
>>+{
>>+       return 0;
>>+}
>>+
>> static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> {
>> 	int rc;
>>@@ -260,6 +265,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> 	struct pci_dev *pdev;
>> 	struct pci_sriov *iov = dev->sriov;
>> 	int bars = 0;
>>+	int retval;
>>
>> 	if (!nr_virtfn)
>> 		return 0;
>>@@ -334,6 +340,12 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>> 	if (nr_virtfn < initial)
>> 		initial = nr_virtfn;
>>
>>+	if ((retval = pcibios_sriov_enable(dev, initial))) {
>>+		dev_err(&dev->dev, "Failure %d from pcibios_sriov_setup()\n",
>>+				retval);
>
>		dev_err(&dev->dev, "Failure %d from pcibios_sriov_enable()\n",
>			retval);

Thanks

>
>>+		return retval;
>>+	}
>>+
>> 	for (i = 0; i < initial; i++) {
>> 		rc = virtfn_add(dev, i, 0);
>> 		if (rc)
>>@@ -368,6 +380,11 @@ failed:
>> 	return rc;
>> }
>>
>>+int __weak pcibios_sriov_disable(struct pci_dev *pdev)
>>+{
>>+       return 0;
>>+}
>>+
>> static void sriov_disable(struct pci_dev *dev)
>> {
>> 	int i;
>>@@ -382,6 +399,8 @@ static void sriov_disable(struct pci_dev *dev)
>> 	for (i = 0; i < iov->num_VFs; i++)
>> 		virtfn_remove(dev, i, 0);
>>
>>+	pcibios_sriov_disable(dev);
>>+
>> 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
>> 	pci_cfg_access_lock(dev);
>> 	pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
>
>Thanks,
>Gavin

-- 
Richard Yang
Help you, Help me

  reply	other threads:[~2014-06-23  6:30 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-10  1:56 [RFC PATCH V3 00/17] Enable SRIOV on POWER8 Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 01/17] pci/iov: Export interface for retrieve VF's BDF Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 02/17] pci/of: Match PCI VFs to dev-tree nodes dynamically Wei Yang
2014-06-23  5:07   ` Gavin Shan
2014-06-23  6:29     ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 03/17] ppc/pci: don't unset pci resources for VFs Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 04/17] PCI: SRIOV: add VF enable/disable hook Wei Yang
2014-06-23  5:03   ` Gavin Shan
2014-06-23  6:29     ` Wei Yang [this message]
2014-06-10  1:56 ` [RFC PATCH V3 05/17] ppc/pnv: user macro to define the TCE size Wei Yang
2014-06-23  5:12   ` Gavin Shan
2014-06-23  6:31     ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 06/17] ppc/pnv: allocate pe->iommu_table dynamically Wei Yang
2014-06-24 10:06   ` Alexey Kardashevskiy
2014-06-25  1:12     ` Wei Yang
2014-06-25  4:12       ` Alexey Kardashevskiy
2014-06-25  5:27         ` Wei Yang
2014-06-25  7:50           ` Alexey Kardashevskiy
2014-06-25  7:56             ` Benjamin Herrenschmidt
2014-06-25  9:18               ` Wei Yang
2014-06-25  9:13             ` Wei Yang
2014-06-25  9:20           ` David Laight
2014-06-25  9:31             ` Wei Yang
2014-06-25 10:30             ` Alexey Kardashevskiy
2014-07-14  3:12             ` Benjamin Herrenschmidt
2014-06-10  1:56 ` [RFC PATCH V3 07/17] ppc/pnv: Add function to deconfig a PE Wei Yang
2014-06-23  5:27   ` Gavin Shan
2014-06-23  9:07     ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 08/17] PCI: Add weak pcibios_sriov_resource_size() interface Wei Yang
2014-06-23  5:41   ` Gavin Shan
2014-06-23  7:56     ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 09/17] PCI: Add weak pcibios_sriov_resource_alignment() interface Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 10/17] PCI: take additional IOV BAR alignment in sizing and assigning Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 11/17] ppc/pnv: Expand VF resources according to the number of total_pe Wei Yang
2014-06-23  6:07   ` Gavin Shan
2014-06-23  6:56     ` Wei Yang
2014-06-23  7:08       ` Gavin Shan
2014-06-10  1:56 ` [RFC PATCH V3 12/17] powerpc/powernv: implement pcibios_sriov_resource_alignment on powernv Wei Yang
2014-06-23  6:09   ` Gavin Shan
2014-06-23  8:21     ` Wei Yang
2014-06-23 23:29       ` Gavin Shan
2014-06-24  1:24         ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 13/17] powerpc/powernv: shift VF resource with an offset Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 14/17] ppc/pci: create/release dev-tree node for VFs Wei Yang
2014-06-18 18:26   ` Grant Likely
2014-06-18 20:51     ` Benjamin Herrenschmidt
2014-06-19  2:46     ` Wei Yang
2014-06-19  8:30       ` Grant Likely
2014-06-19  9:42         ` Wei Yang
2014-06-20  3:46         ` Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 15/17] powerpc/powernv: allocate VF PE Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 16/17] ppc/pci: Expanding IOV BAR, with m64_per_iov supported Wei Yang
2014-06-10  1:56 ` [RFC PATCH V3 17/17] ppc/pnv: Group VF PE when IOV BAR is big on PHB3 Wei Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140623062953.GB5172@richard \
    --to=weiyang@linux.vnet.ibm.com \
    --cc=benh@au1.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=qiudayu@linux.vnet.ibm.com \
    --cc=yan@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).