From: Tobias Klauser <tklauser@distanz.ch>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, b42378@freescale.com,
timur@tabi.org, pawel.moll@arm.com,
ijc+devicetree@hellion.org.uk, tiwai@suse.de,
linux-kernel@vger.kernel.org, rdunlap@infradead.org,
b02247@freescale.com, lgirdwood@gmail.com, robh+dt@kernel.org,
perex@perex.cz, broonie@kernel.org, galak@codeaurora.org,
grant.likely@linaro.org, shawn.guo@linaro.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers
Date: Thu, 24 Jul 2014 17:20:45 +0200 [thread overview]
Message-ID: <20140724152045.GA3384@distanz.ch> (raw)
In-Reply-To: <2c74a11776ffcc017c80dc31be4a8313755be8f5.1406189745.git.nicoleotsuka@gmail.com>
On 2014-07-24 at 10:35:29 +0200, Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
> signal associated with an input clock into a signal associated with a different
> output clock. The driver currently works as a Front End of DPCM with other Back
> Ends DAI links such as ESAI<->CS42888 and SSI<->WM8962 and SAI. It converts the
> original sample rate to a common rate supported by Back Ends for playback while
> converts the common rate of Back Ends to a desired rate for capture. It has 3
> pairs to support three different substreams within totally 10 channels.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
[...]
> --- /dev/null
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -0,0 +1,1031 @@
[...]
> +static struct platform_driver fsl_asrc_driver = {
> + .probe = fsl_asrc_probe,
> + .driver = {
> + .name = "fsl-asrc",
> + .owner = THIS_MODULE,
Not necessary, this will be set by module_platform_driver (or
the expansion of platform_driver_register, respectively).
> + .of_match_table = fsl_asrc_ids,
> + .pm = &fsl_asrc_pm,
> + },
> +};
> +module_platform_driver(fsl_asrc_driver);
[...]
> --- /dev/null
> +++ b/sound/soc/fsl/fsl_asrc_dma.c
> @@ -0,0 +1,384 @@
[...]
> +static int fsl_asrc_dma_pcm_new(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_card *card = rtd->card->snd_card;
> + struct snd_pcm_substream *substream;
> + struct snd_pcm *pcm = rtd->pcm;
> + u64 dma_mask = DMA_BIT_MASK(32);
> + int ret, i;
> +
> + if (!card->dev->dma_mask)
> + card->dev->dma_mask = &dma_mask;
dma_mask will go out of scope after fsl_asrc_dma_pcm_new returns,
resulting in a stray pointer in card->dev->dma_mask.
> + if (!card->dev->coherent_dma_mask)
> + card->dev->coherent_dma_mask = DMA_BIT_MASK(32);
> +
> + for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_LAST; i++) {
> + substream = pcm->streams[i].substream;
> +
> + ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->card->dev,
> + FSL_ASRC_DMABUF_SIZE, &substream->dma_buffer);
> + if (ret) {
> + dev_err(card->dev, "failed to allocate DMA buffer\n");
> + goto err;
> + }
> + }
> +
> + return 0;
> +
> +err:
> + if (--i == 0)
> + snd_dma_free_pages(&pcm->streams[i].substream->dma_buffer);
> +
> + return ret;
> +}
> +
> +static void fsl_asrc_dma_pcm_free(struct snd_pcm *pcm)
> +{
> + struct snd_pcm_substream *substream;
> + int i;
> +
> + for (i = SNDRV_PCM_STREAM_PLAYBACK; i <= SNDRV_PCM_STREAM_LAST; i++) {
> + substream = pcm->streams[i].substream;
> + if (!substream)
> + continue;
> +
> + snd_dma_free_pages(&substream->dma_buffer);
> + substream->dma_buffer.area = NULL;
> + substream->dma_buffer.addr = 0;
> + }
> +}
> +
> +struct snd_soc_platform_driver fsl_asrc_platform = {
> + .ops = &fsl_asrc_dma_pcm_ops,
> + .pcm_new = fsl_asrc_dma_pcm_new,
> + .pcm_free = fsl_asrc_dma_pcm_free,
> +};
> +EXPORT_SYMBOL_GPL(fsl_asrc_platform);
> --
> 1.8.4
next prev parent reply other threads:[~2014-07-24 15:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 8:35 [PATCH v2 0/2] Add Freescale ASRC driver Nicolin Chen
2014-07-24 8:35 ` [PATCH v2 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma Nicolin Chen
2014-07-24 13:30 ` Shawn Guo
2014-07-24 8:35 ` [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers Nicolin Chen
2014-07-24 15:20 ` Tobias Klauser [this message]
2014-07-25 2:05 ` Nicolin Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140724152045.GA3384@distanz.ch \
--to=tklauser@distanz.ch \
--cc=alsa-devel@alsa-project.org \
--cc=b02247@freescale.com \
--cc=b42378@freescale.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=nicoleotsuka@gmail.com \
--cc=pawel.moll@arm.com \
--cc=perex@perex.cz \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
--cc=timur@tabi.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).