From: Nicolin Chen <Guangyu.Chen@freescale.com>
To: Tobias Klauser <tklauser@distanz.ch>
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, b42378@freescale.com,
timur@tabi.org, pawel.moll@arm.com,
ijc+devicetree@hellion.org.uk, tiwai@suse.de,
linux-kernel@vger.kernel.org, rdunlap@infradead.org,
b02247@freescale.com, lgirdwood@gmail.com, robh+dt@kernel.org,
perex@perex.cz, Nicolin Chen <nicoleotsuka@gmail.com>,
broonie@kernel.org, galak@codeaurora.org,
grant.likely@linaro.org, shawn.guo@linaro.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers
Date: Fri, 25 Jul 2014 10:05:22 +0800 [thread overview]
Message-ID: <20140725020520.GA29136@MrMyself> (raw)
In-Reply-To: <20140724152045.GA3384@distanz.ch>
Hi Tobias,
On Thu, Jul 24, 2014 at 05:20:45PM +0200, Tobias Klauser wrote:
> On 2014-07-24 at 10:35:29 +0200, Nicolin Chen <nicoleotsuka@gmail.com> wrote:
> > The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a
> > signal associated with an input clock into a signal associated with a different
> > output clock. The driver currently works as a Front End of DPCM with other Back
> > Ends DAI links such as ESAI<->CS42888 and SSI<->WM8962 and SAI. It converts the
> > original sample rate to a common rate supported by Back Ends for playback while
> > converts the common rate of Back Ends to a desired rate for capture. It has 3
> > pairs to support three different substreams within totally 10 channels.
> >
> > Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> > ---
>
> [...]
>
> > --- /dev/null
> > +++ b/sound/soc/fsl/fsl_asrc.c
> > @@ -0,0 +1,1031 @@
>
> [...]
>
> > +static struct platform_driver fsl_asrc_driver = {
> > + .probe = fsl_asrc_probe,
> > + .driver = {
> > + .name = "fsl-asrc",
> > + .owner = THIS_MODULE,
>
> Not necessary, this will be set by module_platform_driver (or
> the expansion of platform_driver_register, respectively).
>
> > + .of_match_table = fsl_asrc_ids,
> > + .pm = &fsl_asrc_pm,
> > + },
> > +};
> > +module_platform_driver(fsl_asrc_driver);
>
> [...]
>
> > --- /dev/null
> > +++ b/sound/soc/fsl/fsl_asrc_dma.c
> > @@ -0,0 +1,384 @@
>
> [...]
>
> > +static int fsl_asrc_dma_pcm_new(struct snd_soc_pcm_runtime *rtd)
> > +{
> > + struct snd_card *card = rtd->card->snd_card;
> > + struct snd_pcm_substream *substream;
> > + struct snd_pcm *pcm = rtd->pcm;
> > + u64 dma_mask = DMA_BIT_MASK(32);
> > + int ret, i;
> > +
> > + if (!card->dev->dma_mask)
> > + card->dev->dma_mask = &dma_mask;
>
> dma_mask will go out of scope after fsl_asrc_dma_pcm_new returns,
> resulting in a stray pointer in card->dev->dma_mask.
Will fix them in v3.
Thank you
Nicolin
prev parent reply other threads:[~2014-07-25 2:21 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-24 8:35 [PATCH v2 0/2] Add Freescale ASRC driver Nicolin Chen
2014-07-24 8:35 ` [PATCH v2 1/2] ARM: imx: Add the secondary request into the structure for imx-sdma Nicolin Chen
2014-07-24 13:30 ` Shawn Guo
2014-07-24 8:35 ` [PATCH v2 2/2] ASoC: fsl_asrc: Add ASRC ASoC CPU DAI and platform drivers Nicolin Chen
2014-07-24 15:20 ` Tobias Klauser
2014-07-25 2:05 ` Nicolin Chen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140725020520.GA29136@MrMyself \
--to=guangyu.chen@freescale.com \
--cc=alsa-devel@alsa-project.org \
--cc=b02247@freescale.com \
--cc=b42378@freescale.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=nicoleotsuka@gmail.com \
--cc=pawel.moll@arm.com \
--cc=perex@perex.cz \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
--cc=timur@tabi.org \
--cc=tiwai@suse.de \
--cc=tklauser@distanz.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).