linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicolin Chen <nicoleotsuka@gmail.com>
To: Markus Pargmann <mpa@pengutronix.de>
Cc: Shengjiu Wang <shengjiu.wang@freescale.com>,
	timur@tabi.org, alsa-devel@alsa-project.org, tiwai@suse.de,
	Li.Xiubo@freescale.com, linux-kernel@vger.kernel.org,
	lgirdwood@gmail.com, broonie@kernel.org,
	linuxppc-dev@lists.ozlabs.org
Subject: Re: [alsa-devel] [PATCH V1] ASoC: fsl_ssi: refine ipg clock usage in this module
Date: Tue, 9 Sep 2014 23:42:12 -0700	[thread overview]
Message-ID: <20140910064211.GA7652@Asurada> (raw)
In-Reply-To: <20140910062118.GA26348@pengutronix.de>

On Wed, Sep 10, 2014 at 08:21:18AM +0200, Markus Pargmann wrote:
> On Tue, Sep 09, 2014 at 11:38:05AM -0700, Nicolin Chen wrote:
> > On Tue, Sep 09, 2014 at 05:18:07PM +0800, Shengjiu Wang wrote:
> > > @@ -1321,7 +1333,11 @@ static int fsl_ssi_probe(struct platform_device *pdev)
> > >  		return -ENOMEM;
> > >  	}
> > >  
> > > -	ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
> > > +	if (ssi_private->soc->imx)
> > > +		ssi_private->regs = devm_regmap_init_mmio_clk(&pdev->dev,
> > > +			"ipg", iomem, &fsl_ssi_regconfig);
> > > +	else
> > > +		ssi_private->regs = devm_regmap_init_mmio(&pdev->dev, iomem,
> > 
> > As Markus mentioned, the key point here is to be compatible with those
> > non-clock-name platforms.
> > 
> > I think it would be safer to keep the current code while adding an extra
> > clk_disable_unprepare() at the end of probe() as a common routine. And
> > meantime, make sure to have the call for imx only because it seems that
> > the other platforms do not depend on the clock. //a bit guessing here :)
> > 
> > Then we can get a patch like:
> > open() {
> > +	clk_prepare_enable();
> > 	....
> > }
> > 
> > close() {
> > 	....
> > +	clk_disable_unprepare()
> > }
> > 
> > probe() {
> > 	clk_get();
> > 	clk_prepare_enable();
> > 	....
> > 	if (xxx)
> > -		goto err_xx;
> > +		return ret;
> > 	....
> > +	clk_disable_unprepare();
> > 	return 0;
> > -err_xx:
> > -	clk_disable_unprepare()
> > }
> > 
> > remove() {
> > 	....
> > -	clk_disable_unprepare()
> > }
> 
> If I remember correctly, there may be AC97 communication with the codec
> before any substream is created. That's why we enable the SSI unit right
> at the beginning for AC97 in fsl_ssi_setup_reg_vals(). So we need to
> check for AC97 before disabling clocks.

Thank you for the input. That's the exact part I couldn't be sure.
And I agree that adding a check for AC97 will be safer while this
may keeps itself removable if being unnecessary.

Thanks
Nicolin

  reply	other threads:[~2014-09-10  6:42 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-09  9:18 [PATCH V1] ASoC: fsl_ssi: refine ipg clock usage in this module Shengjiu Wang
2014-09-09  9:49 ` [alsa-devel] " Markus Pargmann
2014-09-09  9:55 ` Li.Xiubo
2014-09-09 11:27 ` Mark Brown
2014-09-09 18:03   ` Nicolin Chen
2014-09-09 18:15     ` Mark Brown
2014-09-09 18:41       ` Nicolin Chen
2014-09-09 13:17 ` Timur Tabi
2014-09-09 15:21   ` Mark Brown
2014-09-09 15:24     ` Timur Tabi
2014-09-09 18:38 ` Nicolin Chen
2014-09-09 19:37   ` Timur Tabi
2014-09-09 19:59     ` Nicolin Chen
2014-09-09 20:03       ` Timur Tabi
2014-09-09 20:27         ` Nicolin Chen
2014-09-09 20:37           ` Timur Tabi
2014-09-09 21:09             ` Nicolin Chen
2014-09-10 10:01       ` Shengjiu Wang
2014-09-10  6:21   ` Markus Pargmann
2014-09-10  6:42     ` Nicolin Chen [this message]
2014-09-10 10:30     ` Shengjiu Wang
2014-09-10 10:53       ` Markus Pargmann
2014-09-10  8:12   ` Shengjiu Wang
2014-09-10 17:42     ` Nicolin Chen
2014-09-11  6:36       ` Markus Pargmann
2014-09-11  7:07         ` Shengjiu Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140910064211.GA7652@Asurada \
    --to=nicoleotsuka@gmail.com \
    --cc=Li.Xiubo@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpa@pengutronix.de \
    --cc=shengjiu.wang@freescale.com \
    --cc=timur@tabi.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).