From: Bjorn Helgaas <bhelgaas@google.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, Dave Airlie <airlied@linux.ie>,
linux-pci@vger.kernel.org, Anton Blanchard <anton@au1.ibm.com>,
Brian King <brking@linux.vnet.ibm.com>,
Yijing Wang <wangyijing@huawei.com>, Takashi Iwai <tiwai@suse.de>,
Alex Deucher <alexdeucher@gmail.com>
Subject: Re: [PATCH v2 1/4] pci/msi: Move "no_64bit_msi" flag from powerpc to generic pci_dev
Date: Thu, 2 Oct 2014 09:31:01 -0600 [thread overview]
Message-ID: <20141002153101.GB18056@google.com> (raw)
In-Reply-To: <1412210052.10667.0.camel@pasglop>
On Thu, Oct 02, 2014 at 10:34:12AM +1000, Benjamin Herrenschmidt wrote:
>
> Some devices have broken 64-bit MSI support which only support some
> address bits (40 to 48 typically). This doesn't work on some platforms
> such as POWER servers, so we need a quirk.
>
> Currently we keep a flag in a powerpc specific data structure which we
> have per PCI device. However this is impractical as we really want the
> driver to set that flag appropriately (and the driver shouldn't touch
> that arch specific data structure).
>
> It's also not unlikely that this limitation will affect other architectures
> in the long run.
>
> So this moves the flag to struct pci_dev instead and adjusts the
> corresponding arch/powerpc code to look for it there. At this point,
> there is no attempt at making other architectures honor it just yet,
> though it appears that x86 doesn't care and always generates 32-bit
> MSI addresses.
I thought you were going to add something in drivers/pci to make this more
generic?
Is it feasible to structure this series as follows?
- add generic stuff (struct pci_dev bit, msi.c checks)
- add quirks to drivers to set the pci_dev bit
- change powerpc to check pci_dev bit instead of pdn bit
- remove powerpc-specific quirks since nobody looks as the pdn bit
I think it would be easier to follow if the powerpc-specific parts weren't
intertwined with the rest.
> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> CC: <stable@vger.kernel.org>
> ---
>
> v2: Rename flag to "no_64bit_msi" as suggested by Bjorn
>
> arch/powerpc/include/asm/pci-bridge.h | 2 --
> arch/powerpc/kernel/pci_64.c | 5 +----
> arch/powerpc/platforms/powernv/pci-ioda.c | 3 +--
> arch/powerpc/platforms/powernv/pci.c | 3 +--
> arch/powerpc/platforms/pseries/msi.c | 2 +-
> include/linux/pci.h | 1 +
> 6 files changed, 5 insertions(+), 11 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
> index 4ca90a3..725247b 100644
> --- a/arch/powerpc/include/asm/pci-bridge.h
> +++ b/arch/powerpc/include/asm/pci-bridge.h
> @@ -159,8 +159,6 @@ struct pci_dn {
>
> int pci_ext_config_space; /* for pci devices */
>
> - bool force_32bit_msi;
> -
> struct pci_dev *pcidev; /* back-pointer to the pci device */
> #ifdef CONFIG_EEH
> struct eeh_dev *edev; /* eeh device */
> diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
> index 155013d..d41a831 100644
> --- a/arch/powerpc/kernel/pci_64.c
> +++ b/arch/powerpc/kernel/pci_64.c
> @@ -269,10 +269,7 @@ EXPORT_SYMBOL(pcibus_to_node);
>
> static void quirk_radeon_32bit_msi(struct pci_dev *dev)
> {
> - struct pci_dn *pdn = pci_get_pdn(dev);
> -
> - if (pdn)
> - pdn->force_32bit_msi = true;
> + dev->no_64bit_msi = true;
> }
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
> DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index df241b1..a188bb8 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1311,7 +1311,6 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
> unsigned int is_64, struct msi_msg *msg)
> {
> struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
> - struct pci_dn *pdn = pci_get_pdn(dev);
> struct irq_data *idata;
> struct irq_chip *ichip;
> unsigned int xive_num = hwirq - phb->msi_base;
> @@ -1327,7 +1326,7 @@ static int pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
> return -ENXIO;
>
> /* Force 32-bit MSI on some broken devices */
> - if (pdn && pdn->force_32bit_msi)
> + if (dev->no_64bit_msi)
> is_64 = 0;
>
> /* Assign XIVE to PE */
> diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
> index b854b57..89c6608 100644
> --- a/arch/powerpc/platforms/powernv/pci.c
> +++ b/arch/powerpc/platforms/powernv/pci.c
> @@ -50,9 +50,8 @@ static int pnv_msi_check_device(struct pci_dev* pdev, int nvec, int type)
> {
> struct pci_controller *hose = pci_bus_to_host(pdev->bus);
> struct pnv_phb *phb = hose->private_data;
> - struct pci_dn *pdn = pci_get_pdn(pdev);
>
> - if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
> + if (pdev->no_64bit_msi && !phb->msi32_support)
> return -ENODEV;
>
> return (phb && phb->msi_bmp.bitmap) ? 0 : -ENODEV;
> diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
> index 18ff462..6fd96d8 100644
> --- a/arch/powerpc/platforms/pseries/msi.c
> +++ b/arch/powerpc/platforms/pseries/msi.c
> @@ -429,7 +429,7 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec_in, int type)
> */
> again:
> if (type == PCI_CAP_ID_MSI) {
> - if (pdn->force_32bit_msi) {
> + if (pdev->no_64bit_msi) {
> rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
> if (rc < 0) {
> /*
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 96453f9..fc938003 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -331,6 +331,7 @@ struct pci_dev {
> unsigned int is_added:1;
> unsigned int is_busmaster:1; /* device is busmaster */
> unsigned int no_msi:1; /* device may not use msi */
> + unsigned int no_64bit_msi:1; /* Device has broken 64-bit MSIs */
> unsigned int block_cfg_access:1; /* config space access is blocked */
> unsigned int broken_parity_status:1; /* Device generates false positive parity */
> unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */
>
>
>
next prev parent reply other threads:[~2014-10-02 15:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1412048401.4285.128.camel@pasglop>
[not found] ` <CAErSpo4B6kuZJcKwreNvW1qC5sZ=1Ko71vbzNz7T8-_pjf7mww@mail.gmail.com>
[not found] ` <CADnq5_PT+dX=KA4epGNRaoraco2z1pe5K7UgqLmTUhWMnvtWkw@mail.gmail.com>
[not found] ` <1412108504.4285.155.camel@pasglop>
[not found] ` <CADnq5_O_iLAZUKLL4nph8VwuP2NOkWXhBZC2XTSkFm5P42WZ+g@mail.gmail.com>
[not found] ` <1412110946.4285.158.camel@pasglop>
[not found] ` <CADnq5_OXBax1+TKPsR2RDYTWijQKDVw34ECfWzcwN2SibCGYTg@mail.gmail.com>
[not found] ` <1412112324.4285.160.camel@pasglop>
2014-10-01 2:09 ` [PATCH 1/4] pci/msi: Move "force_32bit_msi" flag from powerpc to generic pci_dev Benjamin Herrenschmidt
2014-10-01 20:33 ` Bjorn Helgaas
2014-10-01 22:09 ` Benjamin Herrenschmidt
2014-10-02 0:33 ` [PATCH v2 1/4] pci/msi: Move "no_64bit_msi" " Benjamin Herrenschmidt
2014-10-02 1:48 ` Stephen Rothwell
2014-10-02 0:34 ` Benjamin Herrenschmidt
2014-10-02 15:31 ` Bjorn Helgaas [this message]
2014-10-02 21:01 ` Benjamin Herrenschmidt
2014-10-02 21:46 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20141002153101.GB18056@google.com \
--to=bhelgaas@google.com \
--cc=airlied@linux.ie \
--cc=alexdeucher@gmail.com \
--cc=anton@au1.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=brking@linux.vnet.ibm.com \
--cc=linux-pci@vger.kernel.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=tiwai@suse.de \
--cc=wangyijing@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).