Re: powerpc/pci: remove pci device on a bus in reverse order

[Gavin Shan <gwshan@linux.vnet.ibm.com>]

On Thu, Dec 04, 2014 at 03:21:18PM +0800, Wei Yang wrote:
>On Thu, Dec 04, 2014 at 04:40:35PM +1100, Michael Ellerman wrote:
>>On Thu, 2014-04-12 at 03:24:37 UTC, Wei Yang wrote:
>>> As in commit ac205b7b (PCI: make sriov work with hotplug remove) indicates,
>>> when removing pci devices on a bus which has VFs, we need to remove them in
>>> the reverse order.
>>> 
>>> This patch applies this pattern on the hotplug remove path on powerpc arch.
>>
>>So is this is a bug fix?
>
>It hasn't trigger a bug yet. I found this issue during the code reading. When
>VFs are enabled and try to remove a bus with VFs, it will face a problem. So I
>port the change in commit ac205b7b here.
>
>>
>>Where/how have you tested this?
>
>I have tested after change on Power8, the EEH hotplug path works fine for PFs
>now. Will test this when EEH for VFs are ready.
>
>Suggest me to keep it untill EEH for VFs are ready?
>

Please keep it and resend it (with typo fixed as I pointed) after SRIOV patchset
gets merged. If SRIOV isn't enabled, we don't need the code change.

By the way, it's something related to EEH for PFs. When PF and its VFs seat on
same PCI bus, we should remove VFs before putting PF offline in the reversed
order as you did in your code change. Otherwise, PF is put into offline and
its driver disables VFs. We try redoing the removal for VFs in hotplug path,
which would cause race condition. If VFs aren't existing, until your SRIOV
patchset is merged, we don't have this problem. Please correct me if I
understood things wrongly.

Thanks,
Gavin