linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Bjorn Helgaas <bhelgaas@google.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: linux-pci@vger.kernel.org, benh@au1.ibm.com,
	linuxppc-dev@lists.ozlabs.org, gwshan@linux.vnet.ibm.com
Subject: Re: [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv
Date: Wed, 4 Feb 2015 15:26:14 -0600	[thread overview]
Message-ID: <20150204212614.GB11271@google.com> (raw)
In-Reply-To: <1421288887-7765-14-git-send-email-weiyang@linux.vnet.ibm.com>

On Thu, Jan 15, 2015 at 10:28:03AM +0800, Wei Yang wrote:
> This patch implements the pcibios_iov_resource_alignment() on powernv
> platform.
> 
> On PowerNV platform, there are 3 cases for the IOV BAR:
> 1. initial state, the IOV BAR size is multiple times of VF BAR size
> 2. after expanded, the IOV BAR size is expanded to meet the M64 segment size
> 3. sizing stage, the IOV BAR is truncated to 0
> 
> pnv_pci_iov_resource_alignment() handle these three cases respectively.
>
> Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
> ---
>  arch/powerpc/include/asm/machdep.h        |    3 +++
>  arch/powerpc/kernel/pci-common.c          |   14 ++++++++++++++
>  arch/powerpc/platforms/powernv/pci-ioda.c |   20 ++++++++++++++++++++
>  3 files changed, 37 insertions(+)
> 
> diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
> index 965547c..12e8eb8 100644
> --- a/arch/powerpc/include/asm/machdep.h
> +++ b/arch/powerpc/include/asm/machdep.h
> @@ -252,6 +252,9 @@ struct machdep_calls {
>  
>  #ifdef CONFIG_PCI_IOV
>  	void (*pcibios_fixup_sriov)(struct pci_bus *bus);
> +	resource_size_t (*pcibios_iov_resource_alignment)(struct pci_dev *,
> +			                                    int resno,
> +							    resource_size_t align);
>  #endif /* CONFIG_PCI_IOV */
>  
>  	/* Called to shutdown machine specific hardware not already controlled
> diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
> index 832b7e1..8751dfb 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -130,6 +130,20 @@ void pcibios_reset_secondary_bus(struct pci_dev *dev)
>  	pci_reset_secondary_bus(dev);
>  }
>  
> +#ifdef CONFIG_PCI_IOV
> +resource_size_t pcibios_iov_resource_alignment(struct pci_dev *pdev,
> +						 int resno,
> +						 resource_size_t align)
> +{
> +	if (ppc_md.pcibios_iov_resource_alignment)
> +		return ppc_md.pcibios_iov_resource_alignment(pdev,
> +							       resno,
> +							       align);
> +
> +	return 0;

This isn't right, is it?  The default (weak) version returns
pci_iov_resource_size(dev, resno).  When you don't have a
ppc_md.pcibios_iov_resource_alignment pointer, don't you
want to do that, too?

> +}
> +#endif /* CONFIG_PCI_IOV */
> +
>  static resource_size_t pcibios_io_size(const struct pci_controller *hose)
>  {
>  #ifdef CONFIG_PPC64
> diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
> index 6704fdf..8bad2b0 100644
> --- a/arch/powerpc/platforms/powernv/pci-ioda.c
> +++ b/arch/powerpc/platforms/powernv/pci-ioda.c
> @@ -1953,6 +1953,25 @@ static resource_size_t pnv_pci_window_alignment(struct pci_bus *bus,
>  	return phb->ioda.io_segsize;
>  }
>  
> +#ifdef CONFIG_PCI_IOV
> +static resource_size_t pnv_pci_iov_resource_alignment(struct pci_dev *pdev,
> +							    int resno,
> +							    resource_size_t align)
> +{
> +	struct pci_dn *pdn = pci_get_pdn(pdev);
> +	resource_size_t iov_align;
> +
> +	iov_align = resource_size(&pdev->resource[resno]);
> +	if (iov_align)
> +		return iov_align;
> +
> +	if (pdn->max_vfs)
> +		return pdn->max_vfs * align;
> +
> +	return align;

pcibios_iov_resource_alignment() returns different things depending on when
you call it?  That doesn't sound good.

Is this related to my questions about sriov_init() and
pnv_pci_ioda_fixup_iov_resources()?  If you adopted my suggestion and set
the size once in sriov_init(), would that get rid of one of these cases?

Maybe it would help me understand if you explained the three cases a bit
more.

> +}
> +#endif /* CONFIG_PCI_IOV */
> +
>  /* Prevent enabling devices for which we couldn't properly
>   * assign a PE
>   */
> @@ -2155,6 +2174,7 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
>  	ppc_md.pcibios_reset_secondary_bus = pnv_pci_reset_secondary_bus;
>  #ifdef CONFIG_PCI_IOV
>  	ppc_md.pcibios_fixup_sriov = pnv_pci_ioda_fixup_sriov;
> +	ppc_md.pcibios_iov_resource_alignment = pnv_pci_iov_resource_alignment;
>  #endif /* CONFIG_PCI_IOV */
>  	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
>  
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2015-02-04 21:26 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-22  5:54 [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2014-12-22  5:54 ` [PATCH V10 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2014-12-22  5:54 ` [PATCH V10 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2014-12-22  5:54 ` [PATCH V10 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2014-12-22  5:54 ` [PATCH V10 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2014-12-22  5:54 ` [PATCH V10 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2014-12-22  5:54 ` [PATCH V10 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2014-12-22  5:54 ` [PATCH V10 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2014-12-22  5:54 ` [PATCH V10 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2014-12-22  5:54 ` [PATCH V10 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2014-12-22  5:54 ` [PATCH V10 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2014-12-22  5:54 ` [PATCH V10 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2014-12-22  5:54 ` [PATCH V10 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2014-12-22  5:54 ` [PATCH V10 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2014-12-22  5:54 ` [PATCH V10 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2014-12-22  5:54 ` [PATCH V10 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2014-12-22  5:54 ` [PATCH V10 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2014-12-22  5:54 ` [PATCH V10 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2014-12-22  6:05 ` [PATCH V10 00/17] Enable SRIOV on Power8 Wei Yang
2015-01-13 18:05   ` Bjorn Helgaas
2015-01-15  2:27     ` [PATCH V11 " Wei Yang
2015-01-15  2:27       ` [PATCH V11 01/17] PCI/IOV: Export interface for retrieve VF's BDF Wei Yang
2015-02-20 23:09         ` Bjorn Helgaas
2015-03-02  6:05           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 02/17] PCI/IOV: add VF enable/disable hook Wei Yang
2015-02-10  0:26         ` Benjamin Herrenschmidt
2015-02-10  1:35           ` Wei Yang
2015-02-10  2:13             ` Benjamin Herrenschmidt
2015-02-10  6:18               ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 03/17] PCI: Add weak pcibios_iov_resource_alignment() interface Wei Yang
2015-02-10  0:32         ` Benjamin Herrenschmidt
2015-02-10  1:44           ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 04/17] PCI: Store VF BAR size in pci_sriov Wei Yang
2015-01-15  2:27       ` [PATCH V11 05/17] PCI: Take additional PF's IOV BAR alignment in sizing and assigning Wei Yang
2015-01-15  2:27       ` [PATCH V11 06/17] powerpc/pci: Add PCI resource alignment documentation Wei Yang
2015-02-04 23:44         ` Bjorn Helgaas
2015-02-10  1:02           ` Benjamin Herrenschmidt
2015-02-20  0:56             ` Bjorn Helgaas
2015-02-20  2:41               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 07/17] powerpc/pci: Don't unset pci resources for VFs Wei Yang
2015-02-10  0:36         ` Benjamin Herrenschmidt
2015-02-10  1:51           ` Wei Yang
2015-02-10  2:14             ` Benjamin Herrenschmidt
2015-02-10  6:25               ` Wei Yang
2015-02-10  8:14                 ` Benjamin Herrenschmidt
2015-02-20 23:47                   ` Bjorn Helgaas
2015-03-02  6:09                     ` Wei Yang
2015-01-15  2:27       ` [PATCH V11 08/17] powrepc/pci: Refactor pci_dn Wei Yang
2015-02-20 23:19         ` Bjorn Helgaas
2015-02-23  0:13           ` Gavin Shan
2015-02-24  8:13             ` Bjorn Helgaas
2015-02-24  8:25               ` Benjamin Herrenschmidt
2015-01-15  2:27       ` [PATCH V11 09/17] powerpc/pci: remove pci_dn->pcidev field Wei Yang
2015-01-15  2:28       ` [PATCH V11 10/17] powerpc/powernv: Use pci_dn in PCI config accessor Wei Yang
2015-01-15  2:28       ` [PATCH V11 11/17] powerpc/powernv: Allocate pe->iommu_table dynamically Wei Yang
2015-01-15  2:28       ` [PATCH V11 12/17] powerpc/powernv: Reserve additional space for IOV BAR according to the number of total_pe Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas
2015-02-04 23:08           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 13/17] powerpc/powernv: Implement pcibios_iov_resource_alignment() on powernv Wei Yang
2015-02-04 21:26         ` Bjorn Helgaas [this message]
2015-02-04 22:45           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 14/17] powerpc/powernv: Shift VF resource with an offset Wei Yang
2015-01-30 23:08         ` Bjorn Helgaas
2015-02-03  1:30           ` Wei Yang
2015-02-03  7:01           ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Wei Yang
2015-02-04  0:19             ` Bjorn Helgaas
2015-02-04  3:34               ` Wei Yang
2015-02-04 14:19                 ` Bjorn Helgaas
2015-02-04 15:20                   ` Wei Yang
2015-02-04 16:08                   ` [PATCH] pci/iov: fix memory leak introduced in "PCI: Store individual VF BAR size in struct pci_sriov" Wei Yang
2015-02-04 16:28                     ` Bjorn Helgaas
2015-02-04 20:53                 ` [PATCH] powerpc/powernv: make sure the IOV BAR will not exceed limit after shifting Bjorn Helgaas
2015-02-05  3:01                   ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 15/17] powerpc/powernv: Allocate VF PE Wei Yang
2015-01-15  2:28       ` [PATCH V11 16/17] powerpc/powernv: Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-04 22:05         ` Bjorn Helgaas
2015-02-05  0:07           ` Wei Yang
2015-01-15  2:28       ` [PATCH V11 17/17] powerpc/powernv: Group VF PE when IOV BAR is big on PHB3 Wei Yang
2015-02-04 23:44       ` [PATCH V11 00/17] Enable SRIOV on Power8 Bjorn Helgaas
2015-02-05  0:13         ` Wei Yang
2015-02-05  6:34         ` [PATCH 0/3] Code adjustment on pci/virtualization Wei Yang
2015-02-05  6:34           ` [PATCH 1/3] fix on Store individual VF BAR size in struct pci_sriov Wei Yang
2015-02-05  6:34           ` [PATCH 2/3] fix Reserve additional space for IOV BAR, with m64_per_iov supported Wei Yang
2015-02-05  6:34           ` [PATCH 3/3] remove the unused end in pnv_pci_vf_resource_shift() Wei Yang
2015-02-10  0:25         ` [PATCH V11 00/17] Enable SRIOV on Power8 Benjamin Herrenschmidt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150204212614.GB11271@google.com \
    --to=bhelgaas@google.com \
    --cc=benh@au1.ibm.com \
    --cc=gwshan@linux.vnet.ibm.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).