linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
To: linuxppc-dev@lists.ozlabs.org, linux-leds@vger.kernel.org
Cc: cooloney@gmail.com, rpurdie@rpsys.net, khandual@linux.vnet.ibm.com
Subject: [PATCH 1/2] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states
Date: Sun, 08 Mar 2015 16:44:24 +0530	[thread overview]
Message-ID: <20150308111408.3759.70606.stgit@localhost.localdomain> (raw)
In-Reply-To: <20150308110558.3759.72635.stgit@localhost.localdomain>

From: Anshuman Khandual <khandual@linux.vnet.ibm.com>

This patch registers the following two new OPAL interfaces calls
for the platform LED subsystem. With the help of these new OPAL calls,
the kernel will be able to get or set the state of various individual
LEDs on the system at any given location code which is passed through
the LED specific device tree nodes.

	(1) OPAL_LEDS_GET_INDICATOR     opal_leds_get_ind
	(2) OPAL_LEDS_SET_INDICATOR     opal_leds_set_ind

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
---
 arch/powerpc/include/asm/opal.h                |   19 +++++++++++++------
 arch/powerpc/platforms/powernv/opal-wrappers.S |    2 ++
 2 files changed, 15 insertions(+), 6 deletions(-)

diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index 9ee0a30..462ee59 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -169,6 +169,8 @@ struct opal_sg_list {
 #define OPAL_IPMI_SEND				107
 #define OPAL_IPMI_RECV				108
 #define OPAL_I2C_REQUEST			109
+#define OPAL_LEDS_GET_INDICATOR			114
+#define OPAL_LEDS_SET_INDICATOR			115
 
 /* Device tree flags */
 
@@ -380,14 +382,14 @@ enum OpalPciMaskAction {
 };
 
 enum OpalSlotLedType {
-	OPAL_SLOT_LED_ID_TYPE = 0,
-	OPAL_SLOT_LED_FAULT_TYPE = 1
+	OPAL_SLOT_LED_TYPE_ID = 0,	/* IDENTIFY LED */
+	OPAL_SLOT_LED_TYPE_FAULT = 1,	/* FAULT LED */
+	OPAL_SLOT_LED_TYPE_MAX = 2
 };
 
-enum OpalLedAction {
-	OPAL_TURN_OFF_LED = 0,
-	OPAL_TURN_ON_LED = 1,
-	OPAL_QUERY_LED_STATE_AFTER_BUSY = 2
+enum OpalSlotLedState {
+	OPAL_SLOT_LED_STATE_OFF = 0,	/* LED is OFF */
+	OPAL_SLOT_LED_STATE_ON = 1	/* LED is ON */
 };
 
 enum OpalEpowStatus {
@@ -931,6 +933,11 @@ int64_t opal_ipmi_recv(uint64_t interface, struct opal_ipmi_msg *msg,
 		uint64_t *msg_len);
 int64_t opal_i2c_request(uint64_t async_token, uint32_t bus_id,
 			 struct opal_i2c_request *oreq);
+int64_t opal_leds_get_ind(char *loc_code, u64 *led_mask,
+			  u64 *led_value, u64 *max_led_type);
+int64_t opal_leds_set_ind(uint64_t token, char *loc_code, const u64 led_mask,
+			  const u64 led_value, u64 *max_led_type);
+
 
 /* Internal functions */
 extern int early_init_dt_scan_opal(unsigned long node, const char *uname,
diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S
index 0509bca..86f2acf 100644
--- a/arch/powerpc/platforms/powernv/opal-wrappers.S
+++ b/arch/powerpc/platforms/powernv/opal-wrappers.S
@@ -292,3 +292,5 @@ OPAL_CALL(opal_tpo_read,			OPAL_READ_TPO);
 OPAL_CALL(opal_ipmi_send,			OPAL_IPMI_SEND);
 OPAL_CALL(opal_ipmi_recv,			OPAL_IPMI_RECV);
 OPAL_CALL(opal_i2c_request,			OPAL_I2C_REQUEST);
+OPAL_CALL(opal_leds_get_ind,			OPAL_LEDS_GET_INDICATOR);
+OPAL_CALL(opal_leds_set_ind,			OPAL_LEDS_SET_INDICATOR);

  reply	other threads:[~2015-03-08 11:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-08 11:13 [PATCH 0/2] LED interface for PowerNV platform Vasant Hegde
2015-03-08 11:14 ` Vasant Hegde [this message]
2015-03-19 21:35   ` [PATCH 1/2] powerpc/powernv: Add OPAL interfaces for accessing and modifying system LED states Stewart Smith
2015-03-20  6:23   ` Michael Ellerman
2015-03-20  8:07     ` Vasant Hegde
2015-03-08 11:14 ` [PATCH 2/2] leds/powernv: Add driver for PowerNV platform Vasant Hegde
2015-03-19 21:35   ` Stewart Smith

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150308111408.3759.70606.stgit@localhost.localdomain \
    --to=hegdevasant@linux.vnet.ibm.com \
    --cc=cooloney@gmail.com \
    --cc=khandual@linux.vnet.ibm.com \
    --cc=linux-leds@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=rpurdie@rpsys.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).