From: Paul Mackerras <paulus@samba.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH] powerpc/powernv: Fixes for hypervisor doorbell handling
Date: Thu, 19 Mar 2015 17:03:50 +1100 [thread overview]
Message-ID: <20150319060349.GA24870@drongo> (raw)
Since we can now use hypervisor doorbells for host IPIs, this makes
sure we clear the host IPI flag when taking a doorbell interrupt, and
clears any pending doorbell IPI in pnv_smp_cpu_kill_self() (as we
already do for IPIs sent via the XICS interrupt controller). Otherwise
if there did happen to be a leftover pending doorbell interrupt for
an offline CPU thread for any reason, it would prevent that thread from
going into a power-saving mode; it would instead keep waking up because
of the interrupt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
---
arch/powerpc/include/asm/reg.h | 3 +++
arch/powerpc/kernel/dbell.c | 2 ++
arch/powerpc/platforms/powernv/smp.c | 13 +++++++++++--
3 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 1c874fb..af56b5c 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -608,13 +608,16 @@
#define SRR1_ISI_N_OR_G 0x10000000 /* ISI: Access is no-exec or G */
#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
+#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 */
#define SRR1_WAKESYSERR 0x00300000 /* System error */
#define SRR1_WAKEEE 0x00200000 /* External interrupt */
#define SRR1_WAKEMT 0x00280000 /* mtctrl */
#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */
#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
+#define SRR1_WAKEDBELL 0x00140000 /* Privileged doorbell on P8 */
#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
#define SRR1_WAKERESET 0x00100000 /* System reset */
+#define SRR1_WAKEHDBELL 0x000c0000 /* Hypervisor doorbell on P8 */
#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */
#define SRR1_WS_DEEPEST 0x00030000 /* Some resources not maintained,
* may not be recoverable */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index f421781..2128f3a 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -17,6 +17,7 @@
#include <asm/dbell.h>
#include <asm/irq_regs.h>
+#include <asm/kvm_ppc.h>
#ifdef CONFIG_SMP
void doorbell_setup_this_cpu(void)
@@ -41,6 +42,7 @@ void doorbell_exception(struct pt_regs *regs)
may_hard_irq_enable();
+ kvmppc_set_host_ipi(smp_processor_id(), 0);
__this_cpu_inc(irq_stat.doorbell_irqs);
smp_ipi_demux();
diff --git a/arch/powerpc/platforms/powernv/smp.c b/arch/powerpc/platforms/powernv/smp.c
index fc34025..7259a24 100644
--- a/arch/powerpc/platforms/powernv/smp.c
+++ b/arch/powerpc/platforms/powernv/smp.c
@@ -33,6 +33,7 @@
#include <asm/runlatch.h>
#include <asm/code-patching.h>
#include <asm/dbell.h>
+#include <asm/kvm_ppc.h>
#include "powernv.h"
@@ -149,7 +150,7 @@ static int pnv_smp_cpu_disable(void)
static void pnv_smp_cpu_kill_self(void)
{
unsigned int cpu;
- unsigned long srr1;
+ unsigned long srr1, wmask;
u32 idle_states;
/* Standard hot unplug procedure */
@@ -161,6 +162,10 @@ static void pnv_smp_cpu_kill_self(void)
generic_set_cpu_dead(cpu);
smp_wmb();
+ wmask = SRR1_WAKEMASK;
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ wmask = SRR1_WAKEMASK_P8;
+
idle_states = pnv_get_supported_cpuidle_states();
/* We don't want to take decrementer interrupts while we are offline,
* so clear LPCR:PECE1. We keep PECE2 enabled.
@@ -191,10 +196,14 @@ static void pnv_smp_cpu_kill_self(void)
* having finished executing in a KVM guest, then srr1
* contains 0.
*/
- if ((srr1 & SRR1_WAKEMASK) == SRR1_WAKEEE) {
+ if ((srr1 & wmask) == SRR1_WAKEEE) {
icp_native_flush_interrupt();
local_paca->irq_happened &= PACA_IRQ_HARD_DIS;
smp_mb();
+ } else if ((srr1 & wmask) == SRR1_WAKEHDBELL) {
+ unsigned long msg = PPC_DBELL_TYPE(PPC_DBELL_SERVER);
+ asm volatile(PPC_MSGCLR(%0) : : "r" (msg));
+ kvmppc_set_host_ipi(cpu, 0);
}
if (cpu_core_split_required())
--
2.1.4
reply other threads:[~2015-03-19 6:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150319060349.GA24870@drongo \
--to=paulus@samba.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).