From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from ozlabs.org (ozlabs.org [IPv6:2401:3900:2:1::2]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by lists.ozlabs.org (Postfix) with ESMTPS id B45C61A0145 for ; Fri, 20 Mar 2015 10:10:21 +1100 (AEDT) Date: Fri, 20 Mar 2015 10:10:18 +1100 From: Paul Mackerras To: linuxppc-dev@ozlabs.org Subject: [PATCH] powerpc/powernv: Fix return value from power7_nap() et al. Message-ID: <20150319231018.GC31148@iris.ozlabs.ibm.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The power7_nap(), power7_sleep() and power7_winkle() functions are called from pnv_smp_cpu_kill_self(), which expects them to return the SRR1 value set by the hardware on wakeup, or 0 if no nap/sleep/winkle occurred. However, in the case where an interrupt needs to be replayed, the logic in power7_powersave_common (the common code for power7_nap et al.) doesn't set r3 to 0 in this case. Instead what we get as the return value is the selector for the type of power-saving mode requested (1, 2 or 3). In fact this should not affect the operation of pnv_smp_cpu_kill_self(), but it is better to get this correct, so this adds an instruction to set r3 to 0 in this case. Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/idle_power7.S | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index 05adc8b..eeaa0d5 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -94,6 +94,7 @@ _GLOBAL(power7_powersave_common) beq 1f addi r1,r1,INT_FRAME_SIZE ld r0,16(r1) + li r3,0 /* Return 0 (no nap) */ mtlr r0 blr -- 2.1.4