From: Olaf Hering <olaf@aepfle.de>
To: linuxppc-dev@ozlabs.org, dri-devel@lists.freedesktop.org
Cc: Ben Skeggs <bskeggs@redhat.com>
Subject: Re: nouveau regression on G5 Dual Core
Date: Wed, 22 Apr 2015 18:43:21 +0200 [thread overview]
Message-ID: <20150422164321.GA28006@aepfle.de> (raw)
In-Reply-To: <20150422160046.GA15743@aepfle.de>
On Wed, Apr 22, Olaf Hering wrote:
> I will see which commit leads to the failure that exists since v3.19-rc4.
c2c2f6cb79141ca22f84c36887fd867373c35c4e +
c7e873f85fb60b1af589ac1b0c62353cfe0bbb29 leads to this output:
[ 47.367618] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x043100a4
[ 47.367626] nouveau [ DEVICE][0000:0a:00.0] Chipset: NV43 (NV43)
[ 47.367629] nouveau [ DEVICE][0000:0a:00.0] Family : NV40
[ 47.367894] nouveau 0000:0a:00.0: Invalid ROM contents
[ 47.367929] nouveau ![ VBIOS][0000:0a:00.0] unable to locate usable image
[ 47.367933] nouveau E[ DEVICE][0000:0a:00.0] failed to create 0x10000001, -22
[ 47.367937] nouveau E[ DRM] failed to create 0x00000080, -22
[ 47.368852] nouveau: probe of 0000:0a:00.0 failed with error -22
And using the commit prior the breakage ad4a362^ (which is e897242) leads to
this output and a working console:
[ 28.099484] nouveau [ DEVICE][0000:0a:00.0] BOOT0 : 0x043100a4
[ 28.099491] nouveau [ DEVICE][0000:0a:00.0] Chipset: NV43 (NV43)
[ 28.099494] nouveau [ DEVICE][0000:0a:00.0] Family : NV40
[ 28.099610] nouveau [ VBIOS][0000:0a:00.0] checking OpenFirmware for image...
[ 28.099636] nouveau [ VBIOS][0000:0a:00.0] ... checksum invalid
[ 28.099639] nouveau [ VBIOS][0000:0a:00.0] checking PRAMIN for image...
[ 28.099645] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 28.099648] nouveau [ VBIOS][0000:0a:00.0] checking PROM for image...
[ 28.191159] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 28.191162] nouveau [ VBIOS][0000:0a:00.0] checking ACPI for image...
[ 28.191166] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 28.191169] nouveau [ VBIOS][0000:0a:00.0] checking PCIROM for image...
[ 28.191207] nouveau 0000:0a:00.0: Invalid ROM contents
[ 28.191229] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 28.191232] nouveau [ VBIOS][0000:0a:00.0] checking PLATFORM for image...
[ 28.191236] nouveau [ VBIOS][0000:0a:00.0] ... signature not found
[ 28.191239] nouveau [ VBIOS][0000:0a:00.0] using image from OpenFirmware
[ 28.191279] nouveau [ VBIOS][0000:0a:00.0] BIT signature found
[ 28.191284] nouveau [ VBIOS][0000:0a:00.0] version 05.43.02.75.00
[ 28.191629] u3msi: allocated virq 0x1a (hw 0x9) addr 0xf8004090
[ 28.191647] nouveau [ PMC][0000:0a:00.0] MSI interrupts enabled
[ 28.191705] nouveau [ PFB][0000:0a:00.0] RAM type: DDR1
[ 28.191708] nouveau [ PFB][0000:0a:00.0] RAM size: 256 MiB
[ 28.191711] nouveau [ PFB][0000:0a:00.0] ZCOMP: 378880 tags
[ 28.250490] nouveau [ PTHERM][0000:0a:00.0] FAN control: toggle
[ 28.250515] nouveau [ PTHERM][0000:0a:00.0] internal sensor: no
[ 28.270373] nouveau [ CLK][0000:0a:00.0] 20: core 300 MHz shader 300 MHz memory 500 MHz
[ 28.270398] nouveau [ CLK][0000:0a:00.0] --: core 300 MHz shader 300 MHz memory 500 MHz
[ 28.270556] nouveau 0000:0a:00.0: Using 32-bit DMA via iommu
[ 28.270649] [TTM] Zone kernel: Available graphics memory: 1003278 kiB
[ 28.270652] [TTM] Initializing pool allocator
[ 28.270687] nouveau [ DRM] VRAM: 252 MiB
[ 28.270690] nouveau [ DRM] GART: 512 MiB
[ 28.270712] nouveau [ DRM] TMDS table version 1.1
[ 28.270716] nouveau [ DRM] DCB version 3.0
[ 28.270720] nouveau [ DRM] DCB outp 00: 01000100 00000028
[ 28.270723] nouveau [ DRM] DCB outp 01: 03000102 00000000
[ 28.270727] nouveau [ DRM] DCB outp 02: 04011210 00000028
[ 28.270730] nouveau [ DRM] DCB outp 03: 02111212 02000100
[ 28.270733] nouveau [ DRM] DCB outp 04: 02011211 0020c070
[ 28.270736] nouveau [ DRM] DCB conn 00: 1030
[ 28.270740] nouveau [ DRM] DCB conn 01: 2130
[ 28.272297] nouveau [ I2C][0000:0a:00.0] detected TMDS transmitter: sil164
[ 28.277738] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 28.277742] [drm] Driver supports precise vblank timestamp query.
[ 28.277750] nouveau [ DRM] 0x14C5: Parsing digital output script table
[ 28.331954] nouveau [ DRM] MM: using M2MF for buffer copies
[ 28.331997] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 4)
[ 28.377539] nouveau [ DRM] allocated 1920x1080 fb: 0x9000, bo c00000007b911400
[ 28.400310] nouveau [ DRM] 0x14C5: Parsing digital output script table
[ 28.450037] Console: switching to colour frame buffer device 240x67
[ 28.451900] nouveau 0000:0a:00.0: fb0: nouveaufb frame buffer device
[ 28.451903] nouveau 0000:0a:00.0: registered panic notifier
[ 28.456097] [drm] Initialized nouveau 1.2.1 20120801 for 0000:0a:00.0 on minor 0
Olaf
next prev parent reply other threads:[~2015-04-22 16:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-28 12:59 nouveau regression on G5 Dual Core Olaf Hering
2015-03-28 13:54 ` Olaf Hering
2015-03-30 13:09 ` Olaf Hering
2015-04-22 16:00 ` Olaf Hering
2015-04-22 16:43 ` Olaf Hering [this message]
2015-05-23 13:22 ` matevy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150422164321.GA28006@aepfle.de \
--to=olaf@aepfle.de \
--cc=bskeggs@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).