* [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values [not found] <1430929407-3487-1-git-send-email-alex.bennee@linaro.org> @ 2015-05-06 16:23 ` Alex Bennée 2015-05-08 9:23 ` Christoffer Dall 0 siblings, 1 reply; 3+ messages in thread From: Alex Bennée @ 2015-05-06 16:23 UTC (permalink / raw) To: kvm, linux-arm-kernel, kvmarm, christoffer.dall, marc.zyngier, peter.maydell, agraf, drjones, pbonzini, zhichao.huang Cc: maintainer:X86 ARCHITECTURE..., Alexey Kardashevskiy, Nadav Amit, Gleb Natapov, jan.kiszka, H. Peter Anvin, open list:LINUX FOR POWERPC..., open list:ABI/API, open list, Bharat Bhushan, dahi, Ingo Molnar, Paul Mackerras, r65777, Mihai Caraman, Thomas Gleixner, bp, Alex Bennée Currently x86, powerpc and soon arm64 use the same two architecture specific bits for guest debug support for software and hardware breakpoints. This makes the shared values explicit while leaving the gate open for another architecture to use some other value if they really really want to. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h index ab4d473..1731569 100644 --- a/arch/powerpc/include/uapi/asm/kvm.h +++ b/arch/powerpc/include/uapi/asm/kvm.h @@ -310,8 +310,8 @@ struct kvm_guest_debug_arch { * and upper 16 bits are architecture specific. Architecture specific defines * that ioctl is for setting hardware breakpoint or software breakpoint. */ -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP /* definition of registers in kvm_run */ struct kvm_sync_regs { diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h index d7dcef5..1438202 100644 --- a/arch/x86/include/uapi/asm/kvm.h +++ b/arch/x86/include/uapi/asm/kvm.h @@ -250,8 +250,8 @@ struct kvm_debug_exit_arch { __u64 dr7; }; -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP #define KVM_GUESTDBG_INJECT_DB 0x00040000 #define KVM_GUESTDBG_INJECT_BP 0x00080000 diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 70ac641..3b6252e 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -570,8 +570,16 @@ struct kvm_s390_irq_state { /* for KVM_SET_GUEST_DEBUG */ -#define KVM_GUESTDBG_ENABLE 0x00000001 -#define KVM_GUESTDBG_SINGLESTEP 0x00000002 +#define KVM_GUESTDBG_ENABLE (1 << 0) +#define KVM_GUESTDBG_SINGLESTEP (1 << 1) + +/* + * Architecture specific stuff uses the top 16 bits of the field, + * however there is some shared commonality for the common cases + */ +#define __KVM_GUESTDBG_USE_SW_BP (1 << 16) +#define __KVM_GUESTDBG_USE_HW_BP (1 << 17) + struct kvm_guest_debug { __u32 control; -- 2.3.5 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values 2015-05-06 16:23 ` [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values Alex Bennée @ 2015-05-08 9:23 ` Christoffer Dall 2015-05-08 11:09 ` Paolo Bonzini 0 siblings, 1 reply; 3+ messages in thread From: Christoffer Dall @ 2015-05-08 9:23 UTC (permalink / raw) To: Alex Bennée Cc: peter.maydell, kvm, Alexey Kardashevskiy, Bharat Bhushan, Paul Mackerras, H. Peter Anvin, kvmarm, Nadav Amit, maintainer:X86 ARCHITECTURE..., agraf, Gleb Natapov, Ingo Molnar, zhichao.huang, jan.kiszka, Mihai Caraman, bp, drjones, marc.zyngier, r65777, Thomas Gleixner, linux-arm-kernel, open list:ABI/API, open list, dahi, pbonzini, open list:LINUX FOR POWERPC... On Wed, May 06, 2015 at 05:23:17PM +0100, Alex Bennée wrote: > Currently x86, powerpc and soon arm64 use the same two architecture > specific bits for guest debug support for software and hardware > breakpoints. This makes the shared values explicit while leaving the > gate open for another architecture to use some other value if they > really really want to. > > Signed-off-by: Alex Bennée <alex.bennee@linaro.org> > Reviewed-by: Andrew Jones <drjones@redhat.com> > > diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h > index ab4d473..1731569 100644 > --- a/arch/powerpc/include/uapi/asm/kvm.h > +++ b/arch/powerpc/include/uapi/asm/kvm.h > @@ -310,8 +310,8 @@ struct kvm_guest_debug_arch { > * and upper 16 bits are architecture specific. Architecture specific defines > * that ioctl is for setting hardware breakpoint or software breakpoint. > */ > -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 > -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 > +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP > +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP > > /* definition of registers in kvm_run */ > struct kvm_sync_regs { > diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h > index d7dcef5..1438202 100644 > --- a/arch/x86/include/uapi/asm/kvm.h > +++ b/arch/x86/include/uapi/asm/kvm.h > @@ -250,8 +250,8 @@ struct kvm_debug_exit_arch { > __u64 dr7; > }; > > -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 > -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 > +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP > +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP > #define KVM_GUESTDBG_INJECT_DB 0x00040000 > #define KVM_GUESTDBG_INJECT_BP 0x00080000 > > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 70ac641..3b6252e 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -570,8 +570,16 @@ struct kvm_s390_irq_state { > > /* for KVM_SET_GUEST_DEBUG */ > > -#define KVM_GUESTDBG_ENABLE 0x00000001 > -#define KVM_GUESTDBG_SINGLESTEP 0x00000002 > +#define KVM_GUESTDBG_ENABLE (1 << 0) > +#define KVM_GUESTDBG_SINGLESTEP (1 << 1) > + > +/* > + * Architecture specific stuff uses the top 16 bits of the field, s/stuff/<something more specific>/ > + * however there is some shared commonality for the common cases > + */ > +#define __KVM_GUESTDBG_USE_SW_BP (1 << 16) > +#define __KVM_GUESTDBG_USE_HW_BP (1 << 17) > + > > struct kvm_guest_debug { > __u32 control; We sort of left this discussion hanging with me expressing slight concern about the usefulness about these defines. Paolo, what are your thoughts? -Christoffer ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values 2015-05-08 9:23 ` Christoffer Dall @ 2015-05-08 11:09 ` Paolo Bonzini 0 siblings, 0 replies; 3+ messages in thread From: Paolo Bonzini @ 2015-05-08 11:09 UTC (permalink / raw) To: Christoffer Dall, Alex Bennée Cc: peter.maydell, kvm, Alexey Kardashevskiy, Bharat Bhushan, Paul Mackerras, H. Peter Anvin, kvmarm, Nadav Amit, maintainer:X86 ARCHITECTURE..., agraf, Gleb Natapov, Ingo Molnar, zhichao.huang, jan.kiszka, Mihai Caraman, bp, drjones, marc.zyngier, r65777, Thomas Gleixner, linux-arm-kernel, ABI/API, open list, dahi, open list:LINUX FOR POWERPC... On 08/05/2015 11:23, Christoffer Dall wrote: > On Wed, May 06, 2015 at 05:23:17PM +0100, Alex Bennée wrote: >> Currently x86, powerpc and soon arm64 use the same two architecture >> specific bits for guest debug support for software and hardware >> breakpoints. This makes the shared values explicit while leaving the >> gate open for another architecture to use some other value if they >> really really want to. >> >> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> >> Reviewed-by: Andrew Jones <drjones@redhat.com> >> >> diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h >> index ab4d473..1731569 100644 >> --- a/arch/powerpc/include/uapi/asm/kvm.h >> +++ b/arch/powerpc/include/uapi/asm/kvm.h >> @@ -310,8 +310,8 @@ struct kvm_guest_debug_arch { >> * and upper 16 bits are architecture specific. Architecture specific defines >> * that ioctl is for setting hardware breakpoint or software breakpoint. >> */ >> -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 >> -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 >> +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP >> +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP >> >> /* definition of registers in kvm_run */ >> struct kvm_sync_regs { >> diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h >> index d7dcef5..1438202 100644 >> --- a/arch/x86/include/uapi/asm/kvm.h >> +++ b/arch/x86/include/uapi/asm/kvm.h >> @@ -250,8 +250,8 @@ struct kvm_debug_exit_arch { >> __u64 dr7; >> }; >> >> -#define KVM_GUESTDBG_USE_SW_BP 0x00010000 >> -#define KVM_GUESTDBG_USE_HW_BP 0x00020000 >> +#define KVM_GUESTDBG_USE_SW_BP __KVM_GUESTDBG_USE_SW_BP >> +#define KVM_GUESTDBG_USE_HW_BP __KVM_GUESTDBG_USE_HW_BP >> #define KVM_GUESTDBG_INJECT_DB 0x00040000 >> #define KVM_GUESTDBG_INJECT_BP 0x00080000 >> >> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h >> index 70ac641..3b6252e 100644 >> --- a/include/uapi/linux/kvm.h >> +++ b/include/uapi/linux/kvm.h >> @@ -570,8 +570,16 @@ struct kvm_s390_irq_state { >> >> /* for KVM_SET_GUEST_DEBUG */ >> >> -#define KVM_GUESTDBG_ENABLE 0x00000001 >> -#define KVM_GUESTDBG_SINGLESTEP 0x00000002 >> +#define KVM_GUESTDBG_ENABLE (1 << 0) >> +#define KVM_GUESTDBG_SINGLESTEP (1 << 1) >> + >> +/* >> + * Architecture specific stuff uses the top 16 bits of the field, > > s/stuff/<something more specific>/ > >> + * however there is some shared commonality for the common cases >> + */ >> +#define __KVM_GUESTDBG_USE_SW_BP (1 << 16) >> +#define __KVM_GUESTDBG_USE_HW_BP (1 << 17) >> + >> >> struct kvm_guest_debug { >> __u32 control; > > We sort of left this discussion hanging with me expressing slight > concern about the usefulness about these defines. > > Paolo, what are your thoughts? I would just lift these two KVM_GUESTDBG_* defines to include/uapi/linux/kvm.h and say that architecture specific stuff uses the top 14 bits of the field. :) Paolo ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-05-08 11:10 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1430929407-3487-1-git-send-email-alex.bennee@linaro.org>
2015-05-06 16:23 ` [PATCH v3 02/12] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values Alex Bennée
2015-05-08 9:23 ` Christoffer Dall
2015-05-08 11:09 ` Paolo Bonzini
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).