[PATCH] QorIQ/TMU: add thermal management support based on TMU

[PATCH] QorIQ/TMU: add thermal management support based on TMU

[Jia Hongtao]

It supports one critical trip point and one passive trip point.
The cpufreq is used as the cooling device to throttle CPUs when
the passive trip is crossed.

Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
---
 drivers/thermal/Kconfig         |  11 ++
 drivers/thermal/Makefile        |   1 +
 drivers/thermal/qoriq_thermal.c | 405 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 417 insertions(+)
 create mode 100644 drivers/thermal/qoriq_thermal.c

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index af40db0..c0a8bd1 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -147,6 +147,17 @@ config IMX_THERMAL
 	  cpufreq is used as the cooling device to throttle CPUs when the
 	  passive trip is crossed.
 
+config QORIQ_THERMAL
+	tristate "Freescale QorIQ Thermal Monitoring Unit"
+	depends on CPU_THERMAL
+	depends on OF
+	default n
+	help
+	  Enable thermal management based on Freescale QorIQ Thermal Monitoring
+	  Unit (TMU). It supports one critical trip point and one passive trip
+	  point. The cpufreq is used as the cooling device to throttle CPUs when
+	  the passive trip is crossed.
+
 config SPEAR_THERMAL
 	bool "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index fa0dc48..7de4847 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
 obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
+obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
 obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
 obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
new file mode 100644
index 0000000..f5d3a2c
--- /dev/null
+++ b/drivers/thermal/qoriq_thermal.c
@@ -0,0 +1,405 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/*
+ * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)
+ */
+#include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
+
+#define SITES_MAX		16
+
+#define TMU_TEMP_PASSIVE	85000
+#define TMU_TEMP_CRITICAL	95000
+
+#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
+#define TMU_POLLING_DELAY	5000
+
+/* The driver supports 1 passive trip point and 1 critical trip point */
+enum tmu_thermal_trip {
+	TMU_TRIP_PASSIVE,
+	TMU_TRIP_CRITICAL,
+	TMU_TRIP_NUM,
+};
+
+/*
+ * QorIQ TMU Registers
+ */
+struct qoriq_tmu_site_regs {
+	__be32 tritsr;		/* Immediate Temperature Site Register */
+	__be32 tratsr;		/* Average Temperature Site Register */
+	u8 res0[0x8];
+} __packed;
+
+struct qoriq_tmu_regs {
+	__be32 tmr;		/* Mode Register */
+#define TMR_DISABLE	0x0
+#define TMR_ME		0x80000000
+#define TMR_ALPF	0x0c000000
+#define TMR_MSITE	0x00008000
+#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
+	__be32 tsr;		/* Status Register */
+	__be32 tmtmir;		/* Temperature measurement interval Register */
+#define TMTMIR_DEFAULT	0x00000007
+	u8 res0[0x14];
+	__be32 tier;		/* Interrupt Enable Register */
+#define TIER_DISABLE	0x0
+	__be32 tidr;		/* Interrupt Detect Register */
+	__be32 tiscr;		/* Interrupt Site Capture Register */
+	__be32 ticscr;		/* Interrupt Critical Site Capture Register */
+	u8 res1[0x10];
+	__be32 tmhtcrh;		/* High Temperature Capture Register */
+	__be32 tmhtcrl;		/* Low Temperature Capture Register */
+	u8 res2[0x8];
+	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
+	__be32 tmhtatr;		/* High Temperature Average Threshold */
+	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
+	u8 res3[0x24];
+	__be32 ttcfgr;		/* Temperature Configuration Register */
+	__be32 tscfgr;		/* Sensor Configuration Register */
+	u8 res4[0x78];
+	struct qoriq_tmu_site_regs site[SITES_MAX];
+	u8 res5[0x9f8];
+	__be32 ipbrr0;		/* IP Block Revision Register 0 */
+	__be32 ipbrr1;		/* IP Block Revision Register 1 */
+	u8 res6[0x310];
+	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
+	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
+	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
+	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
+};
+
+/*
+ * Thermal zone data
+ */
+struct qoriq_tmu_data {
+	struct thermal_zone_device *tz;
+	struct thermal_cooling_device *cdev;
+	enum thermal_device_mode mode;
+	unsigned long temp_passive;
+	unsigned long temp_critical;
+	struct qoriq_tmu_regs __iomem *regs;
+};
+
+static int tmu_get_mode(struct thermal_zone_device *tz,
+			enum thermal_device_mode *mode)
+{
+	struct qoriq_tmu_data *data = tz->devdata;
+
+	*mode = data->mode;
+
+	return 0;
+}
+
+static int tmu_set_mode(struct thermal_zone_device *tz,
+			enum thermal_device_mode mode)
+{
+	struct qoriq_tmu_data *data = tz->devdata;
+
+	if (mode == THERMAL_DEVICE_ENABLED) {
+		tz->polling_delay = TMU_POLLING_DELAY;
+		tz->passive_delay = TMU_PASSIVE_DELAY;
+		thermal_zone_device_update(tz);
+	} else {
+		tz->polling_delay = 0;
+		tz->passive_delay = 0;
+	}
+
+	data->mode = mode;
+
+	return 0;
+}
+
+static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
+{
+	u8 val;
+	struct qoriq_tmu_data *data = tz->devdata;
+
+	val = ioread32be(&data->regs->site[0].tritsr);
+	*temp = (unsigned long)val * 1000;
+
+	return 0;
+}
+
+static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
+			     enum thermal_trip_type *type)
+{
+	*type = (trip == TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
+					     THERMAL_TRIP_CRITICAL;
+	return 0;
+}
+
+static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
+			     unsigned long *temp)
+{
+	struct qoriq_tmu_data *data = tz->devdata;
+
+	*temp = (trip == TMU_TRIP_PASSIVE) ? data->temp_passive :
+					     data->temp_critical;
+	return 0;
+}
+
+static int tmu_get_crit_temp(struct thermal_zone_device *tz,
+			     unsigned long *temp)
+{
+	struct qoriq_tmu_data *data = tz->devdata;
+
+	*temp = data->temp_critical;
+	return 0;
+}
+
+static int tmu_get_trend(struct thermal_zone_device *thermal,
+			int trip, enum thermal_trend *trend)
+{
+	int ret;
+	unsigned long trip_temp;
+
+	ret = tmu_get_trip_temp(thermal, trip, &trip_temp);
+	if (ret < 0)
+		return ret;
+
+	if (thermal->temperature >= trip_temp)
+		*trend = THERMAL_TREND_RAISE_FULL;
+	else
+		*trend = THERMAL_TREND_DROP_FULL;
+
+	return 0;
+}
+
+static int tmu_bind(struct thermal_zone_device *tz,
+		    struct thermal_cooling_device *cdev)
+{
+	int ret;
+
+	ret = thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
+					       THERMAL_NO_LIMIT,
+					       THERMAL_NO_LIMIT);
+	if (ret) {
+		dev_err(&tz->device,
+			"Binding zone %s with cdev %s failed:%d\n",
+			tz->type, cdev->type, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tmu_unbind(struct thermal_zone_device *tz,
+		      struct thermal_cooling_device *cdev)
+{
+	int ret;
+
+	ret = thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev);
+	if (ret) {
+		dev_err(&tz->device,
+			"Unbinding zone %s with cdev %s failed:%d\n",
+			tz->type, cdev->type, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void qoriq_tmu_calibration(struct platform_device *pdev)
+{
+	int i, val, len;
+	const __be32 *calibration;
+	struct device_node *node = pdev->dev.of_node;
+	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
+
+	/* Disable monitoring before calibration */
+	iowrite32be(TMR_DISABLE, &data->regs->tmr);
+
+	calibration = of_get_property(node, "calibration", &len);
+	if (calibration == NULL) {
+		pr_err("TMU: Failed to get calibration data.\n");
+		return;
+	}
+
+	for (i = 0; i < len; i += 8, calibration += 2) {
+		val = (int)of_read_number(calibration, 1);
+		iowrite32be(val, &data->regs->ttcfgr);
+		val = (int)of_read_number(calibration + 1, 1);
+		iowrite32be(val, &data->regs->tscfgr);
+	}
+}
+
+static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
+{
+	/* Disable interrupt, using polling instead */
+	iowrite32be(TIER_DISABLE, &data->regs->tier);
+
+	/* Set update_interval */
+	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
+
+	/* Enable monitoring */
+	iowrite32be(TMR_ALL, &data->regs->tmr);
+}
+
+static struct thermal_zone_device_ops tmu_tz_ops = {
+	.bind = tmu_bind,
+	.unbind = tmu_unbind,
+	.get_temp = tmu_get_temp,
+	.get_trend = tmu_get_trend,
+	.get_mode = tmu_get_mode,
+	.set_mode = tmu_set_mode,
+	.get_trip_type = tmu_get_trip_type,
+	.get_trip_temp = tmu_get_trip_temp,
+	.get_crit_temp = tmu_get_crit_temp,
+};
+
+static int qoriq_tmu_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct cpumask clip_cpus;
+	struct qoriq_tmu_data *data;
+
+	if (!cpufreq_get_current_driver()) {
+		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
+		return -EPROBE_DEFER;
+	}
+
+	if (!pdev->dev.of_node) {
+		dev_err(&pdev->dev, "Device OF-Node is NULL");
+		return -EFAULT;
+	}
+
+	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, data);
+	data->regs = of_iomap(pdev->dev.of_node, 0);
+
+	if (!data->regs) {
+		dev_err(&pdev->dev, "Failed to get memory region\n");
+		ret = -ENODEV;
+		goto err_iomap;
+	}
+
+	qoriq_tmu_calibration(pdev);	/* TMU calibration */
+
+	qoriq_tmu_init_device(data);	/* TMU initialization */
+
+	cpumask_setall(&clip_cpus);
+	data->cdev = cpufreq_cooling_register(&clip_cpus);
+	if (IS_ERR(data->cdev)) {
+		ret = PTR_ERR(data->cdev);
+		dev_err(&data->cdev->device,
+			"Failed to register cpufreq cooling device: %d\n", ret);
+		goto err_cooling;
+	}
+
+	data->temp_passive = TMU_TEMP_PASSIVE;
+	data->temp_critical = TMU_TEMP_CRITICAL;
+	data->tz = thermal_zone_device_register("tmu_thermal_zone",
+						TMU_TRIP_NUM,
+						0, data,
+						&tmu_tz_ops, NULL,
+						TMU_PASSIVE_DELAY,
+						TMU_POLLING_DELAY);
+
+	if (IS_ERR(data->tz)) {
+		ret = PTR_ERR(data->tz);
+		dev_err(&pdev->dev,
+			"Failed to register thermal zone device %d\n", ret);
+		goto err_thermal;
+	}
+
+	data->mode = THERMAL_DEVICE_ENABLED;
+
+	return 0;
+
+err_thermal:
+	cpufreq_cooling_unregister(data->cdev);
+
+err_cooling:
+	iounmap(data->regs);
+
+err_iomap:
+	dev_set_drvdata(&pdev->dev, NULL);
+	devm_kfree(&pdev->dev, data);
+
+	return ret;
+}
+
+static int qoriq_tmu_remove(struct platform_device *pdev)
+{
+	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
+
+	/* Disable monitoring */
+	iowrite32be(TMR_DISABLE, &data->regs->tmr);
+
+	thermal_zone_device_unregister(data->tz);
+	cpufreq_cooling_unregister(data->cdev);
+	iounmap(data->regs);
+
+	dev_set_drvdata(&pdev->dev, NULL);
+	devm_kfree(&pdev->dev, data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int qoriq_tmu_suspend(struct device *dev)
+{
+	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+	/* Disable monitoring */
+	iowrite32be(TMR_DISABLE, &data->regs->tmr);
+
+	return 0;
+}
+
+static int qoriq_tmu_resume(struct device *dev)
+{
+	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
+
+	/* Enable monitoring */
+	iowrite32be(TMR_ALL, &data->regs->tmr);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
+			 qoriq_tmu_suspend, qoriq_tmu_resume);
+
+static const struct of_device_id qoriq_tmu_match[] = {
+	{ .compatible = "fsl,qoriq-tmu", },
+	{},
+};
+
+static struct platform_driver qoriq_tmu = {
+	.driver	= {
+		.owner		= THIS_MODULE,
+		.name		= "qoriq_thermal",
+		.pm = &qoriq_tmu_pm_ops,
+		.of_match_table	= qoriq_tmu_match,
+	},
+	.probe	= qoriq_tmu_probe,
+	.remove	= qoriq_tmu_remove,
+};
+module_platform_driver(qoriq_tmu);
+
+MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
+MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
+MODULE_LICENSE("GPL v2");
-- 
2.1.0.27.g96db324

RE: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Hongtao Jia]

Hello Rui Zhang,

Please help to review this Thermal Management driver.

Thanks.

---
Best Regards,
Hongtao

> -----Original Message-----
> From: Jia Hongtao [mailto:hongtao.jia@freescale.com]
> Sent: Friday, April 03, 2015 3:11 PM
> To: rui.zhang@intel.com
> Cc: linux-pm@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; Wood Scott-
> B07421; Jia Hongtao-B38951
> Subject: [PATCH] QorIQ/TMU: add thermal management support based on TMU
>=20
> It supports one critical trip point and one passive trip point.
> The cpufreq is used as the cooling device to throttle CPUs when
> the passive trip is crossed.
>=20
> Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> ---
>  drivers/thermal/Kconfig         |  11 ++
>  drivers/thermal/Makefile        |   1 +
>  drivers/thermal/qoriq_thermal.c | 405
> ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 417 insertions(+)
>  create mode 100644 drivers/thermal/qoriq_thermal.c
>=20
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index af40db0..c0a8bd1 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -147,6 +147,17 @@ config IMX_THERMAL
>  	  cpufreq is used as the cooling device to throttle CPUs when the
>  	  passive trip is crossed.
>=20
> +config QORIQ_THERMAL
> +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> +	depends on CPU_THERMAL
> +	depends on OF
> +	default n
> +	help
> +	  Enable thermal management based on Freescale QorIQ Thermal
> Monitoring
> +	  Unit (TMU). It supports one critical trip point and one passive
> trip
> +	  point. The cpufreq is used as the cooling device to throttle CPUs
> when
> +	  the passive trip is crossed.
> +
>  config SPEAR_THERMAL
>  	bool "SPEAr thermal sensor driver"
>  	depends on PLAT_SPEAR
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index fa0dc48..7de4847 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+=3D dove_thermal.o
>  obj-$(CONFIG_DB8500_THERMAL)	+=3D db8500_thermal.o
>  obj-$(CONFIG_ARMADA_THERMAL)	+=3D armada_thermal.o
>  obj-$(CONFIG_IMX_THERMAL)	+=3D imx_thermal.o
> +obj-$(CONFIG_QORIQ_THERMAL)	+=3D qoriq_thermal.o
>  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+=3D db8500_cpufreq_cooling.o
>  obj-$(CONFIG_INTEL_POWERCLAMP)	+=3D intel_powerclamp.o
>  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+=3D x86_pkg_temp_thermal.o
> diff --git a/drivers/thermal/qoriq_thermal.c
> b/drivers/thermal/qoriq_thermal.c
> new file mode 100644
> index 0000000..f5d3a2c
> --- /dev/null
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -0,0 +1,405 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but
> WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
> for
> + * more details.
> + *
> + */
> +
> +/*
> + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)
> + */
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/thermal.h>
> +
> +#define SITES_MAX		16
> +
> +#define TMU_TEMP_PASSIVE	85000
> +#define TMU_TEMP_CRITICAL	95000
> +
> +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> +#define TMU_POLLING_DELAY	5000
> +
> +/* The driver supports 1 passive trip point and 1 critical trip point */
> +enum tmu_thermal_trip {
> +	TMU_TRIP_PASSIVE,
> +	TMU_TRIP_CRITICAL,
> +	TMU_TRIP_NUM,
> +};
> +
> +/*
> + * QorIQ TMU Registers
> + */
> +struct qoriq_tmu_site_regs {
> +	__be32 tritsr;		/* Immediate Temperature Site Register */
> +	__be32 tratsr;		/* Average Temperature Site Register */
> +	u8 res0[0x8];
> +} __packed;
> +
> +struct qoriq_tmu_regs {
> +	__be32 tmr;		/* Mode Register */
> +#define TMR_DISABLE	0x0
> +#define TMR_ME		0x80000000
> +#define TMR_ALPF	0x0c000000
> +#define TMR_MSITE	0x00008000
> +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> +	__be32 tsr;		/* Status Register */
> +	__be32 tmtmir;		/* Temperature measurement interval
> Register */
> +#define TMTMIR_DEFAULT	0x00000007
> +	u8 res0[0x14];
> +	__be32 tier;		/* Interrupt Enable Register */
> +#define TIER_DISABLE	0x0
> +	__be32 tidr;		/* Interrupt Detect Register */
> +	__be32 tiscr;		/* Interrupt Site Capture Register */
> +	__be32 ticscr;		/* Interrupt Critical Site Capture Register
> */
> +	u8 res1[0x10];
> +	__be32 tmhtcrh;		/* High Temperature Capture Register */
> +	__be32 tmhtcrl;		/* Low Temperature Capture Register */
> +	u8 res2[0x8];
> +	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
> +	__be32 tmhtatr;		/* High Temperature Average Threshold */
> +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
> +	u8 res3[0x24];
> +	__be32 ttcfgr;		/* Temperature Configuration Register */
> +	__be32 tscfgr;		/* Sensor Configuration Register */
> +	u8 res4[0x78];
> +	struct qoriq_tmu_site_regs site[SITES_MAX];
> +	u8 res5[0x9f8];
> +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> +	u8 res6[0x310];
> +	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
> +	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
> +	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
> +	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
> +};
> +
> +/*
> + * Thermal zone data
> + */
> +struct qoriq_tmu_data {
> +	struct thermal_zone_device *tz;
> +	struct thermal_cooling_device *cdev;
> +	enum thermal_device_mode mode;
> +	unsigned long temp_passive;
> +	unsigned long temp_critical;
> +	struct qoriq_tmu_regs __iomem *regs;
> +};
> +
> +static int tmu_get_mode(struct thermal_zone_device *tz,
> +			enum thermal_device_mode *mode)
> +{
> +	struct qoriq_tmu_data *data =3D tz->devdata;
> +
> +	*mode =3D data->mode;
> +
> +	return 0;
> +}
> +
> +static int tmu_set_mode(struct thermal_zone_device *tz,
> +			enum thermal_device_mode mode)
> +{
> +	struct qoriq_tmu_data *data =3D tz->devdata;
> +
> +	if (mode =3D=3D THERMAL_DEVICE_ENABLED) {
> +		tz->polling_delay =3D TMU_POLLING_DELAY;
> +		tz->passive_delay =3D TMU_PASSIVE_DELAY;
> +		thermal_zone_device_update(tz);
> +	} else {
> +		tz->polling_delay =3D 0;
> +		tz->passive_delay =3D 0;
> +	}
> +
> +	data->mode =3D mode;
> +
> +	return 0;
> +}
> +
> +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long
> *temp)
> +{
> +	u8 val;
> +	struct qoriq_tmu_data *data =3D tz->devdata;
> +
> +	val =3D ioread32be(&data->regs->site[0].tritsr);
> +	*temp =3D (unsigned long)val * 1000;
> +
> +	return 0;
> +}
> +
> +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> +			     enum thermal_trip_type *type)
> +{
> +	*type =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> +					     THERMAL_TRIP_CRITICAL;
> +	return 0;
> +}
> +
> +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> +			     unsigned long *temp)
> +{
> +	struct qoriq_tmu_data *data =3D tz->devdata;
> +
> +	*temp =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? data->temp_passive :
> +					     data->temp_critical;
> +	return 0;
> +}
> +
> +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> +			     unsigned long *temp)
> +{
> +	struct qoriq_tmu_data *data =3D tz->devdata;
> +
> +	*temp =3D data->temp_critical;
> +	return 0;
> +}
> +
> +static int tmu_get_trend(struct thermal_zone_device *thermal,
> +			int trip, enum thermal_trend *trend)
> +{
> +	int ret;
> +	unsigned long trip_temp;
> +
> +	ret =3D tmu_get_trip_temp(thermal, trip, &trip_temp);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (thermal->temperature >=3D trip_temp)
> +		*trend =3D THERMAL_TREND_RAISE_FULL;
> +	else
> +		*trend =3D THERMAL_TREND_DROP_FULL;
> +
> +	return 0;
> +}
> +
> +static int tmu_bind(struct thermal_zone_device *tz,
> +		    struct thermal_cooling_device *cdev)
> +{
> +	int ret;
> +
> +	ret =3D thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> +					       THERMAL_NO_LIMIT,
> +					       THERMAL_NO_LIMIT);
> +	if (ret) {
> +		dev_err(&tz->device,
> +			"Binding zone %s with cdev %s failed:%d\n",
> +			tz->type, cdev->type, ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tmu_unbind(struct thermal_zone_device *tz,
> +		      struct thermal_cooling_device *cdev)
> +{
> +	int ret;
> +
> +	ret =3D thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> cdev);
> +	if (ret) {
> +		dev_err(&tz->device,
> +			"Unbinding zone %s with cdev %s failed:%d\n",
> +			tz->type, cdev->type, ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void qoriq_tmu_calibration(struct platform_device *pdev)
> +{
> +	int i, val, len;
> +	const __be32 *calibration;
> +	struct device_node *node =3D pdev->dev.of_node;
> +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> +
> +	/* Disable monitoring before calibration */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	calibration =3D of_get_property(node, "calibration", &len);
> +	if (calibration =3D=3D NULL) {
> +		pr_err("TMU: Failed to get calibration data.\n");
> +		return;
> +	}
> +
> +	for (i =3D 0; i < len; i +=3D 8, calibration +=3D 2) {
> +		val =3D (int)of_read_number(calibration, 1);
> +		iowrite32be(val, &data->regs->ttcfgr);
> +		val =3D (int)of_read_number(calibration + 1, 1);
> +		iowrite32be(val, &data->regs->tscfgr);
> +	}
> +}
> +
> +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> +{
> +	/* Disable interrupt, using polling instead */
> +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> +
> +	/* Set update_interval */
> +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> +
> +	/* Enable monitoring */
> +	iowrite32be(TMR_ALL, &data->regs->tmr);
> +}
> +
> +static struct thermal_zone_device_ops tmu_tz_ops =3D {
> +	.bind =3D tmu_bind,
> +	.unbind =3D tmu_unbind,
> +	.get_temp =3D tmu_get_temp,
> +	.get_trend =3D tmu_get_trend,
> +	.get_mode =3D tmu_get_mode,
> +	.set_mode =3D tmu_set_mode,
> +	.get_trip_type =3D tmu_get_trip_type,
> +	.get_trip_temp =3D tmu_get_trip_temp,
> +	.get_crit_temp =3D tmu_get_crit_temp,
> +};
> +
> +static int qoriq_tmu_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct cpumask clip_cpus;
> +	struct qoriq_tmu_data *data;
> +
> +	if (!cpufreq_get_current_driver()) {
> +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> +		return -EPROBE_DEFER;
> +	}
> +
> +	if (!pdev->dev.of_node) {
> +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> +		return -EFAULT;
> +	}
> +
> +	data =3D devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> +			    GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(&pdev->dev, data);
> +	data->regs =3D of_iomap(pdev->dev.of_node, 0);
> +
> +	if (!data->regs) {
> +		dev_err(&pdev->dev, "Failed to get memory region\n");
> +		ret =3D -ENODEV;
> +		goto err_iomap;
> +	}
> +
> +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> +
> +	qoriq_tmu_init_device(data);	/* TMU initialization */
> +
> +	cpumask_setall(&clip_cpus);
> +	data->cdev =3D cpufreq_cooling_register(&clip_cpus);
> +	if (IS_ERR(data->cdev)) {
> +		ret =3D PTR_ERR(data->cdev);
> +		dev_err(&data->cdev->device,
> +			"Failed to register cpufreq cooling device: %d\n", ret);
> +		goto err_cooling;
> +	}
> +
> +	data->temp_passive =3D TMU_TEMP_PASSIVE;
> +	data->temp_critical =3D TMU_TEMP_CRITICAL;
> +	data->tz =3D thermal_zone_device_register("tmu_thermal_zone",
> +						TMU_TRIP_NUM,
> +						0, data,
> +						&tmu_tz_ops, NULL,
> +						TMU_PASSIVE_DELAY,
> +						TMU_POLLING_DELAY);
> +
> +	if (IS_ERR(data->tz)) {
> +		ret =3D PTR_ERR(data->tz);
> +		dev_err(&pdev->dev,
> +			"Failed to register thermal zone device %d\n", ret);
> +		goto err_thermal;
> +	}
> +
> +	data->mode =3D THERMAL_DEVICE_ENABLED;
> +
> +	return 0;
> +
> +err_thermal:
> +	cpufreq_cooling_unregister(data->cdev);
> +
> +err_cooling:
> +	iounmap(data->regs);
> +
> +err_iomap:
> +	dev_set_drvdata(&pdev->dev, NULL);
> +	devm_kfree(&pdev->dev, data);
> +
> +	return ret;
> +}
> +
> +static int qoriq_tmu_remove(struct platform_device *pdev)
> +{
> +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> +
> +	/* Disable monitoring */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	thermal_zone_device_unregister(data->tz);
> +	cpufreq_cooling_unregister(data->cdev);
> +	iounmap(data->regs);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +	devm_kfree(&pdev->dev, data);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int qoriq_tmu_suspend(struct device *dev)
> +{
> +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> +
> +	/* Disable monitoring */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	return 0;
> +}
> +
> +static int qoriq_tmu_resume(struct device *dev)
> +{
> +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> +
> +	/* Enable monitoring */
> +	iowrite32be(TMR_ALL, &data->regs->tmr);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> +
> +static const struct of_device_id qoriq_tmu_match[] =3D {
> +	{ .compatible =3D "fsl,qoriq-tmu", },
> +	{},
> +};
> +
> +static struct platform_driver qoriq_tmu =3D {
> +	.driver	=3D {
> +		.owner		=3D THIS_MODULE,
> +		.name		=3D "qoriq_thermal",
> +		.pm =3D &qoriq_tmu_pm_ops,
> +		.of_match_table	=3D qoriq_tmu_match,
> +	},
> +	.probe	=3D qoriq_tmu_probe,
> +	.remove	=3D qoriq_tmu_remove,
> +};
> +module_platform_driver(qoriq_tmu);
> +
> +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.1.0.27.g96db324

RE: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Hongtao Jia]

Hello Eduardo,

As Rui Zhang did not response for a long time.
Could you help to review this Thermal Management driver?

Thanks.

---
Best Regards,
Hongtao

> -----Original Message-----
> From: Jia Hongtao-B38951
> Sent: Tuesday, April 28, 2015 3:34 PM
> To: rui.zhang@intel.com
> Cc: linux-pm@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; Wood Scott-
> B07421; Jia Hongtao-B38951
> Subject: RE: [PATCH] QorIQ/TMU: add thermal management support based on
> TMU
>=20
> Hello Rui Zhang,
>=20
> Please help to review this Thermal Management driver.
>=20
> Thanks.
>=20
> ---
> Best Regards,
> Hongtao
>=20
> > -----Original Message-----
> > From: Jia Hongtao [mailto:hongtao.jia@freescale.com]
> > Sent: Friday, April 03, 2015 3:11 PM
> > To: rui.zhang@intel.com
> > Cc: linux-pm@vger.kernel.org; linuxppc-dev@lists.ozlabs.org; Wood
> > Scott- B07421; Jia Hongtao-B38951
> > Subject: [PATCH] QorIQ/TMU: add thermal management support based on
> > TMU
> >
> > It supports one critical trip point and one passive trip point.
> > The cpufreq is used as the cooling device to throttle CPUs when the
> > passive trip is crossed.
> >
> > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > ---
> >  drivers/thermal/Kconfig         |  11 ++
> >  drivers/thermal/Makefile        |   1 +
> >  drivers/thermal/qoriq_thermal.c | 405
> > ++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 417 insertions(+)
> >  create mode 100644 drivers/thermal/qoriq_thermal.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > af40db0..c0a8bd1 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -147,6 +147,17 @@ config IMX_THERMAL
> >  	  cpufreq is used as the cooling device to throttle CPUs when the
> >  	  passive trip is crossed.
> >
> > +config QORIQ_THERMAL
> > +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> > +	depends on CPU_THERMAL
> > +	depends on OF
> > +	default n
> > +	help
> > +	  Enable thermal management based on Freescale QorIQ Thermal
> > Monitoring
> > +	  Unit (TMU). It supports one critical trip point and one passive
> > trip
> > +	  point. The cpufreq is used as the cooling device to throttle CPUs
> > when
> > +	  the passive trip is crossed.
> > +
> >  config SPEAR_THERMAL
> >  	bool "SPEAr thermal sensor driver"
> >  	depends on PLAT_SPEAR
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > fa0dc48..7de4847 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+=3D dove_thermal.o
> >  obj-$(CONFIG_DB8500_THERMAL)	+=3D db8500_thermal.o
> >  obj-$(CONFIG_ARMADA_THERMAL)	+=3D armada_thermal.o
> >  obj-$(CONFIG_IMX_THERMAL)	+=3D imx_thermal.o
> > +obj-$(CONFIG_QORIQ_THERMAL)	+=3D qoriq_thermal.o
> >  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+=3D db8500_cpufreq_cooling.o
> >  obj-$(CONFIG_INTEL_POWERCLAMP)	+=3D intel_powerclamp.o
> >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+=3D x86_pkg_temp_thermal.o
> > diff --git a/drivers/thermal/qoriq_thermal.c
> > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > 0000000..f5d3a2c
> > --- /dev/null
> > +++ b/drivers/thermal/qoriq_thermal.c
> > @@ -0,0 +1,405 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> > + or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > + License
> > for
> > + * more details.
> > + *
> > + */
> > +
> > +/*
> > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)  */
> > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h> #include
> > +<linux/module.h> #include <linux/platform_device.h> #include
> > +<linux/err.h> #include <linux/io.h> #include <linux/of.h> #include
> > +<linux/thermal.h>
> > +
> > +#define SITES_MAX		16
> > +
> > +#define TMU_TEMP_PASSIVE	85000
> > +#define TMU_TEMP_CRITICAL	95000
> > +
> > +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> > +#define TMU_POLLING_DELAY	5000
> > +
> > +/* The driver supports 1 passive trip point and 1 critical trip point
> > +*/ enum tmu_thermal_trip {
> > +	TMU_TRIP_PASSIVE,
> > +	TMU_TRIP_CRITICAL,
> > +	TMU_TRIP_NUM,
> > +};
> > +
> > +/*
> > + * QorIQ TMU Registers
> > + */
> > +struct qoriq_tmu_site_regs {
> > +	__be32 tritsr;		/* Immediate Temperature Site Register */
> > +	__be32 tratsr;		/* Average Temperature Site Register */
> > +	u8 res0[0x8];
> > +} __packed;
> > +
> > +struct qoriq_tmu_regs {
> > +	__be32 tmr;		/* Mode Register */
> > +#define TMR_DISABLE	0x0
> > +#define TMR_ME		0x80000000
> > +#define TMR_ALPF	0x0c000000
> > +#define TMR_MSITE	0x00008000
> > +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> > +	__be32 tsr;		/* Status Register */
> > +	__be32 tmtmir;		/* Temperature measurement interval
> > Register */
> > +#define TMTMIR_DEFAULT	0x00000007
> > +	u8 res0[0x14];
> > +	__be32 tier;		/* Interrupt Enable Register */
> > +#define TIER_DISABLE	0x0
> > +	__be32 tidr;		/* Interrupt Detect Register */
> > +	__be32 tiscr;		/* Interrupt Site Capture Register */
> > +	__be32 ticscr;		/* Interrupt Critical Site Capture Register
> > */
> > +	u8 res1[0x10];
> > +	__be32 tmhtcrh;		/* High Temperature Capture Register */
> > +	__be32 tmhtcrl;		/* Low Temperature Capture Register */
> > +	u8 res2[0x8];
> > +	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
> > +	__be32 tmhtatr;		/* High Temperature Average Threshold */
> > +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
> > +	u8 res3[0x24];
> > +	__be32 ttcfgr;		/* Temperature Configuration Register */
> > +	__be32 tscfgr;		/* Sensor Configuration Register */
> > +	u8 res4[0x78];
> > +	struct qoriq_tmu_site_regs site[SITES_MAX];
> > +	u8 res5[0x9f8];
> > +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> > +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> > +	u8 res6[0x310];
> > +	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
> > +	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
> > +	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
> > +	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
> > +};
> > +
> > +/*
> > + * Thermal zone data
> > + */
> > +struct qoriq_tmu_data {
> > +	struct thermal_zone_device *tz;
> > +	struct thermal_cooling_device *cdev;
> > +	enum thermal_device_mode mode;
> > +	unsigned long temp_passive;
> > +	unsigned long temp_critical;
> > +	struct qoriq_tmu_regs __iomem *regs; };
> > +
> > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > +			enum thermal_device_mode *mode)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*mode =3D data->mode;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > +			enum thermal_device_mode mode)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	if (mode =3D=3D THERMAL_DEVICE_ENABLED) {
> > +		tz->polling_delay =3D TMU_POLLING_DELAY;
> > +		tz->passive_delay =3D TMU_PASSIVE_DELAY;
> > +		thermal_zone_device_update(tz);
> > +	} else {
> > +		tz->polling_delay =3D 0;
> > +		tz->passive_delay =3D 0;
> > +	}
> > +
> > +	data->mode =3D mode;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long
> > *temp)
> > +{
> > +	u8 val;
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	val =3D ioread32be(&data->regs->site[0].tritsr);
> > +	*temp =3D (unsigned long)val * 1000;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> > +			     enum thermal_trip_type *type) {
> > +	*type =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > +					     THERMAL_TRIP_CRITICAL;
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> > +			     unsigned long *temp)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*temp =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? data->temp_passive :
> > +					     data->temp_critical;
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > +			     unsigned long *temp)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*temp =3D data->temp_critical;
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trend(struct thermal_zone_device *thermal,
> > +			int trip, enum thermal_trend *trend) {
> > +	int ret;
> > +	unsigned long trip_temp;
> > +
> > +	ret =3D tmu_get_trip_temp(thermal, trip, &trip_temp);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	if (thermal->temperature >=3D trip_temp)
> > +		*trend =3D THERMAL_TREND_RAISE_FULL;
> > +	else
> > +		*trend =3D THERMAL_TREND_DROP_FULL;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_bind(struct thermal_zone_device *tz,
> > +		    struct thermal_cooling_device *cdev) {
> > +	int ret;
> > +
> > +	ret =3D thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> > +					       THERMAL_NO_LIMIT,
> > +					       THERMAL_NO_LIMIT);
> > +	if (ret) {
> > +		dev_err(&tz->device,
> > +			"Binding zone %s with cdev %s failed:%d\n",
> > +			tz->type, cdev->type, ret);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_unbind(struct thermal_zone_device *tz,
> > +		      struct thermal_cooling_device *cdev) {
> > +	int ret;
> > +
> > +	ret =3D thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > cdev);
> > +	if (ret) {
> > +		dev_err(&tz->device,
> > +			"Unbinding zone %s with cdev %s failed:%d\n",
> > +			tz->type, cdev->type, ret);
> > +		return ret;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void qoriq_tmu_calibration(struct platform_device *pdev) {
> > +	int i, val, len;
> > +	const __be32 *calibration;
> > +	struct device_node *node =3D pdev->dev.of_node;
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > +
> > +	/* Disable monitoring before calibration */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	calibration =3D of_get_property(node, "calibration", &len);
> > +	if (calibration =3D=3D NULL) {
> > +		pr_err("TMU: Failed to get calibration data.\n");
> > +		return;
> > +	}
> > +
> > +	for (i =3D 0; i < len; i +=3D 8, calibration +=3D 2) {
> > +		val =3D (int)of_read_number(calibration, 1);
> > +		iowrite32be(val, &data->regs->ttcfgr);
> > +		val =3D (int)of_read_number(calibration + 1, 1);
> > +		iowrite32be(val, &data->regs->tscfgr);
> > +	}
> > +}
> > +
> > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
> > +	/* Disable interrupt, using polling instead */
> > +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> > +
> > +	/* Set update_interval */
> > +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > +
> > +	/* Enable monitoring */
> > +	iowrite32be(TMR_ALL, &data->regs->tmr); }
> > +
> > +static struct thermal_zone_device_ops tmu_tz_ops =3D {
> > +	.bind =3D tmu_bind,
> > +	.unbind =3D tmu_unbind,
> > +	.get_temp =3D tmu_get_temp,
> > +	.get_trend =3D tmu_get_trend,
> > +	.get_mode =3D tmu_get_mode,
> > +	.set_mode =3D tmu_set_mode,
> > +	.get_trip_type =3D tmu_get_trip_type,
> > +	.get_trip_temp =3D tmu_get_trip_temp,
> > +	.get_crit_temp =3D tmu_get_crit_temp,
> > +};
> > +
> > +static int qoriq_tmu_probe(struct platform_device *pdev) {
> > +	int ret;
> > +	struct cpumask clip_cpus;
> > +	struct qoriq_tmu_data *data;
> > +
> > +	if (!cpufreq_get_current_driver()) {
> > +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > +		return -EPROBE_DEFER;
> > +	}
> > +
> > +	if (!pdev->dev.of_node) {
> > +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> > +		return -EFAULT;
> > +	}
> > +
> > +	data =3D devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > +			    GFP_KERNEL);
> > +	if (!data)
> > +		return -ENOMEM;
> > +
> > +	dev_set_drvdata(&pdev->dev, data);
> > +	data->regs =3D of_iomap(pdev->dev.of_node, 0);
> > +
> > +	if (!data->regs) {
> > +		dev_err(&pdev->dev, "Failed to get memory region\n");
> > +		ret =3D -ENODEV;
> > +		goto err_iomap;
> > +	}
> > +
> > +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> > +
> > +	qoriq_tmu_init_device(data);	/* TMU initialization */
> > +
> > +	cpumask_setall(&clip_cpus);
> > +	data->cdev =3D cpufreq_cooling_register(&clip_cpus);
> > +	if (IS_ERR(data->cdev)) {
> > +		ret =3D PTR_ERR(data->cdev);
> > +		dev_err(&data->cdev->device,
> > +			"Failed to register cpufreq cooling device: %d\n", ret);
> > +		goto err_cooling;
> > +	}
> > +
> > +	data->temp_passive =3D TMU_TEMP_PASSIVE;
> > +	data->temp_critical =3D TMU_TEMP_CRITICAL;
> > +	data->tz =3D thermal_zone_device_register("tmu_thermal_zone",
> > +						TMU_TRIP_NUM,
> > +						0, data,
> > +						&tmu_tz_ops, NULL,
> > +						TMU_PASSIVE_DELAY,
> > +						TMU_POLLING_DELAY);
> > +
> > +	if (IS_ERR(data->tz)) {
> > +		ret =3D PTR_ERR(data->tz);
> > +		dev_err(&pdev->dev,
> > +			"Failed to register thermal zone device %d\n", ret);
> > +		goto err_thermal;
> > +	}
> > +
> > +	data->mode =3D THERMAL_DEVICE_ENABLED;
> > +
> > +	return 0;
> > +
> > +err_thermal:
> > +	cpufreq_cooling_unregister(data->cdev);
> > +
> > +err_cooling:
> > +	iounmap(data->regs);
> > +
> > +err_iomap:
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +	devm_kfree(&pdev->dev, data);
> > +
> > +	return ret;
> > +}
> > +
> > +static int qoriq_tmu_remove(struct platform_device *pdev) {
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > +
> > +	/* Disable monitoring */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	thermal_zone_device_unregister(data->tz);
> > +	cpufreq_cooling_unregister(data->cdev);
> > +	iounmap(data->regs);
> > +
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +	devm_kfree(&pdev->dev, data);
> > +
> > +	return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int qoriq_tmu_suspend(struct device *dev) {
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > +
> > +	/* Disable monitoring */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	return 0;
> > +}
> > +
> > +static int qoriq_tmu_resume(struct device *dev) {
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > +
> > +	/* Enable monitoring */
> > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > +
> > +	return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> > +
> > +static const struct of_device_id qoriq_tmu_match[] =3D {
> > +	{ .compatible =3D "fsl,qoriq-tmu", },
> > +	{},
> > +};
> > +
> > +static struct platform_driver qoriq_tmu =3D {
> > +	.driver	=3D {
> > +		.owner		=3D THIS_MODULE,
> > +		.name		=3D "qoriq_thermal",
> > +		.pm =3D &qoriq_tmu_pm_ops,
> > +		.of_match_table	=3D qoriq_tmu_match,
> > +	},
> > +	.probe	=3D qoriq_tmu_probe,
> > +	.remove	=3D qoriq_tmu_remove,
> > +};
> > +module_platform_driver(qoriq_tmu);
> > +
> > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.1.0.27.g96db324

Re: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Eduardo Valentin]

[-- Attachment #1: Type: text/plain, Size: 15117 bytes --]

Jia Hongtao,

Thanks for sharing your driver. Sorry for the late answer. Please find
couple of comments as follows.

On Fri, Apr 03, 2015 at 03:11:27PM +0800, Jia Hongtao wrote:
> It supports one critical trip point and one passive trip point.
> The cpufreq is used as the cooling device to throttle CPUs when
> the passive trip is crossed.
> 
> Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> ---
>  drivers/thermal/Kconfig         |  11 ++
>  drivers/thermal/Makefile        |   1 +
>  drivers/thermal/qoriq_thermal.c | 405 ++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 417 insertions(+)
>  create mode 100644 drivers/thermal/qoriq_thermal.c
> 
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index af40db0..c0a8bd1 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -147,6 +147,17 @@ config IMX_THERMAL
>  	  cpufreq is used as the cooling device to throttle CPUs when the
>  	  passive trip is crossed.
>  
> +config QORIQ_THERMAL
> +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> +	depends on CPU_THERMAL
> +	depends on OF
> +	default n
> +	help
> +	  Enable thermal management based on Freescale QorIQ Thermal Monitoring
> +	  Unit (TMU). It supports one critical trip point and one passive trip
> +	  point. The cpufreq is used as the cooling device to throttle CPUs when
> +	  the passive trip is crossed.

dummy question, what is the level of overlap between QorIQ and IMX
thermal drivers?

> +
>  config SPEAR_THERMAL
>  	bool "SPEAr thermal sensor driver"
>  	depends on PLAT_SPEAR
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index fa0dc48..7de4847 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
>  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
>  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
>  obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
> +obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
>  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
>  obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
>  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> new file mode 100644
> index 0000000..f5d3a2c
> --- /dev/null
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -0,0 +1,405 @@
> +/*
> + * Copyright 2015 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + */
> +
> +/*
> + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)
> + */
> +#include <linux/cpufreq.h>
> +#include <linux/cpu_cooling.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/thermal.h>
> +
> +#define SITES_MAX		16
> +
> +#define TMU_TEMP_PASSIVE	85000
> +#define TMU_TEMP_CRITICAL	95000
> +
> +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> +#define TMU_POLLING_DELAY	5000
> +
> +/* The driver supports 1 passive trip point and 1 critical trip point */
> +enum tmu_thermal_trip {
> +	TMU_TRIP_PASSIVE,
> +	TMU_TRIP_CRITICAL,
> +	TMU_TRIP_NUM,
> +};
> +

the above symbol is not used in this driver.

> +/*
> + * QorIQ TMU Registers
> + */
> +struct qoriq_tmu_site_regs {
> +	__be32 tritsr;		/* Immediate Temperature Site Register */
> +	__be32 tratsr;		/* Average Temperature Site Register */
> +	u8 res0[0x8];
> +} __packed;
> +
> +struct qoriq_tmu_regs {
> +	__be32 tmr;		/* Mode Register */
> +#define TMR_DISABLE	0x0
> +#define TMR_ME		0x80000000
> +#define TMR_ALPF	0x0c000000
> +#define TMR_MSITE	0x00008000
> +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> +	__be32 tsr;		/* Status Register */
> +	__be32 tmtmir;		/* Temperature measurement interval Register */
> +#define TMTMIR_DEFAULT	0x00000007
> +	u8 res0[0x14];
> +	__be32 tier;		/* Interrupt Enable Register */
> +#define TIER_DISABLE	0x0
> +	__be32 tidr;		/* Interrupt Detect Register */
> +	__be32 tiscr;		/* Interrupt Site Capture Register */
> +	__be32 ticscr;		/* Interrupt Critical Site Capture Register */
> +	u8 res1[0x10];
> +	__be32 tmhtcrh;		/* High Temperature Capture Register */
> +	__be32 tmhtcrl;		/* Low Temperature Capture Register */
> +	u8 res2[0x8];
> +	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
> +	__be32 tmhtatr;		/* High Temperature Average Threshold */
> +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
> +	u8 res3[0x24];
> +	__be32 ttcfgr;		/* Temperature Configuration Register */
> +	__be32 tscfgr;		/* Sensor Configuration Register */
> +	u8 res4[0x78];
> +	struct qoriq_tmu_site_regs site[SITES_MAX];
> +	u8 res5[0x9f8];
> +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> +	u8 res6[0x310];
> +	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
> +	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
> +	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
> +	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
> +};
> +
> +/*
> + * Thermal zone data
> + */
> +struct qoriq_tmu_data {
> +	struct thermal_zone_device *tz;
> +	struct thermal_cooling_device *cdev;
> +	enum thermal_device_mode mode;
> +	unsigned long temp_passive;
> +	unsigned long temp_critical;
> +	struct qoriq_tmu_regs __iomem *regs;
> +};
> +
> +static int tmu_get_mode(struct thermal_zone_device *tz,
> +			enum thermal_device_mode *mode)
> +{
> +	struct qoriq_tmu_data *data = tz->devdata;
> +
> +	*mode = data->mode;
> +
> +	return 0;
> +}
> +
> +static int tmu_set_mode(struct thermal_zone_device *tz,
> +			enum thermal_device_mode mode)
> +{
> +	struct qoriq_tmu_data *data = tz->devdata;
> +
> +	if (mode == THERMAL_DEVICE_ENABLED) {
> +		tz->polling_delay = TMU_POLLING_DELAY;
> +		tz->passive_delay = TMU_PASSIVE_DELAY;
> +		thermal_zone_device_update(tz);
> +	} else {
> +		tz->polling_delay = 0;
> +		tz->passive_delay = 0;
> +	}
> +
> +	data->mode = mode;
> +
> +	return 0;
> +}
> +
> +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
> +{
> +	u8 val;
> +	struct qoriq_tmu_data *data = tz->devdata;
> +
> +	val = ioread32be(&data->regs->site[0].tritsr);
> +	*temp = (unsigned long)val * 1000;
> +
> +	return 0;
> +}
> +
> +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> +			     enum thermal_trip_type *type)
> +{
> +	*type = (trip == TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> +					     THERMAL_TRIP_CRITICAL;
> +	return 0;
> +}
> +
> +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> +			     unsigned long *temp)
> +{
> +	struct qoriq_tmu_data *data = tz->devdata;
> +
> +	*temp = (trip == TMU_TRIP_PASSIVE) ? data->temp_passive :
> +					     data->temp_critical;
> +	return 0;
> +}
> +
> +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> +			     unsigned long *temp)
> +{
> +	struct qoriq_tmu_data *data = tz->devdata;
> +
> +	*temp = data->temp_critical;

nip: add an empty line, to follow your pattern.

> +	return 0;
> +}
> +
> +static int tmu_get_trend(struct thermal_zone_device *thermal,
> +			int trip, enum thermal_trend *trend)
> +{
> +	int ret;
> +	unsigned long trip_temp;
> +
> +	ret = tmu_get_trip_temp(thermal, trip, &trip_temp);
> +	if (ret < 0)
> +		return ret;
> +
> +	if (thermal->temperature >= trip_temp)
> +		*trend = THERMAL_TREND_RAISE_FULL;
> +	else
> +		*trend = THERMAL_TREND_DROP_FULL;
> +


Did I miss something here
or that is not really trending, is it? 

Trending is supposed to be 
delta(temperature)/delta(time).



> +	return 0;
> +}
> +
> +static int tmu_bind(struct thermal_zone_device *tz,
> +		    struct thermal_cooling_device *cdev)
> +{
> +	int ret;
> +
> +	ret = thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> +					       THERMAL_NO_LIMIT,
> +					       THERMAL_NO_LIMIT);
> +	if (ret) {
> +		dev_err(&tz->device,
> +			"Binding zone %s with cdev %s failed:%d\n",
> +			tz->type, cdev->type, ret);
> +		return ret;
> +	}


> +
> +	return 0;

I think it is fine if you just return ret;

> +}
> +
> +static int tmu_unbind(struct thermal_zone_device *tz,
> +		      struct thermal_cooling_device *cdev)
> +{
> +	int ret;
> +
> +	ret = thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev);
> +	if (ret) {
> +		dev_err(&tz->device,
> +			"Unbinding zone %s with cdev %s failed:%d\n",
> +			tz->type, cdev->type, ret);
> +		return ret;
> +	}

ditto.

> +
> +	return 0;
> +}
> +
> +static void qoriq_tmu_calibration(struct platform_device *pdev)
> +{
> +	int i, val, len;
> +	const __be32 *calibration;
> +	struct device_node *node = pdev->dev.of_node;
> +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> +
> +	/* Disable monitoring before calibration */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	calibration = of_get_property(node, "calibration", &len);
> +	if (calibration == NULL) {
> +		pr_err("TMU: Failed to get calibration data.\n");

use dev_err when possible.

> +		return;
> +	}
> +
> +	for (i = 0; i < len; i += 8, calibration += 2) {
> +		val = (int)of_read_number(calibration, 1);
> +		iowrite32be(val, &data->regs->ttcfgr);
> +		val = (int)of_read_number(calibration + 1, 1);
> +		iowrite32be(val, &data->regs->tscfgr);

are the above properties your offset and slope extrapolation constants?

If yes, please use the coefficients DT property. Please, check the of
thermal code.

> +	}
> +}
> +
> +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> +{
> +	/* Disable interrupt, using polling instead */
> +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> +
> +	/* Set update_interval */
> +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> +
> +	/* Enable monitoring */
> +	iowrite32be(TMR_ALL, &data->regs->tmr);
> +}
> +
> +static struct thermal_zone_device_ops tmu_tz_ops = {
> +	.bind = tmu_bind,
> +	.unbind = tmu_unbind,
> +	.get_temp = tmu_get_temp,
> +	.get_trend = tmu_get_trend,
> +	.get_mode = tmu_get_mode,
> +	.set_mode = tmu_set_mode,
> +	.get_trip_type = tmu_get_trip_type,
> +	.get_trip_temp = tmu_get_trip_temp,
> +	.get_crit_temp = tmu_get_crit_temp,
> +};
> +
> +static int qoriq_tmu_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct cpumask clip_cpus;
> +	struct qoriq_tmu_data *data;
> +
> +	if (!cpufreq_get_current_driver()) {
> +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> +		return -EPROBE_DEFER;
> +	}
> +
> +	if (!pdev->dev.of_node) {
> +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> +		return -EFAULT;
> +	}
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> +			    GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(&pdev->dev, data);
> +	data->regs = of_iomap(pdev->dev.of_node, 0);
> +
> +	if (!data->regs) {
> +		dev_err(&pdev->dev, "Failed to get memory region\n");
> +		ret = -ENODEV;
> +		goto err_iomap;
> +	}
> +
> +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> +
> +	qoriq_tmu_init_device(data);	/* TMU initialization */
> +
> +	cpumask_setall(&clip_cpus);
> +	data->cdev = cpufreq_cooling_register(&clip_cpus);

Given that this is a DT based device driver, have you considered using
OF thermal APIs?

> +	if (IS_ERR(data->cdev)) {
> +		ret = PTR_ERR(data->cdev);
> +		dev_err(&data->cdev->device,
> +			"Failed to register cpufreq cooling device: %d\n", ret);
> +		goto err_cooling;
> +	}
> +
> +	data->temp_passive = TMU_TEMP_PASSIVE;
> +	data->temp_critical = TMU_TEMP_CRITICAL;
> +	data->tz = thermal_zone_device_register("tmu_thermal_zone",
> +						TMU_TRIP_NUM,
> +						0, data,
> +						&tmu_tz_ops, NULL,
> +						TMU_PASSIVE_DELAY,
> +						TMU_POLLING_DELAY);
> +
> +	if (IS_ERR(data->tz)) {
> +		ret = PTR_ERR(data->tz);
> +		dev_err(&pdev->dev,
> +			"Failed to register thermal zone device %d\n", ret);
> +		goto err_thermal;
> +	}
> +
> +	data->mode = THERMAL_DEVICE_ENABLED;


Don't you need to get a clock and enable it before handling this sensor?

> +
> +	return 0;
> +
> +err_thermal:
> +	cpufreq_cooling_unregister(data->cdev);
> +
> +err_cooling:
> +	iounmap(data->regs);
> +
> +err_iomap:
> +	dev_set_drvdata(&pdev->dev, NULL);
> +	devm_kfree(&pdev->dev, data);
> +
> +	return ret;
> +}
> +
> +static int qoriq_tmu_remove(struct platform_device *pdev)
> +{
> +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> +
> +	/* Disable monitoring */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	thermal_zone_device_unregister(data->tz);
> +	cpufreq_cooling_unregister(data->cdev);
> +	iounmap(data->regs);
> +
> +	dev_set_drvdata(&pdev->dev, NULL);
> +	devm_kfree(&pdev->dev, data);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int qoriq_tmu_suspend(struct device *dev)
> +{
> +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> +
> +	/* Disable monitoring */
> +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> +
> +	return 0;
> +}
> +
> +static int qoriq_tmu_resume(struct device *dev)
> +{
> +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> +
> +	/* Enable monitoring */
> +	iowrite32be(TMR_ALL, &data->regs->tmr);
> +
> +	return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> +
> +static const struct of_device_id qoriq_tmu_match[] = {
> +	{ .compatible = "fsl,qoriq-tmu", },
> +	{},
> +};


You need to add a binding file describing your chip, and how
to deploy its DT nodes under:
 Documentation/devicetree/bindings/thermal/


> +
> +static struct platform_driver qoriq_tmu = {
> +	.driver	= {
> +		.owner		= THIS_MODULE,
> +		.name		= "qoriq_thermal",
> +		.pm = &qoriq_tmu_pm_ops,
> +		.of_match_table	= qoriq_tmu_match,
> +	},
> +	.probe	= qoriq_tmu_probe,
> +	.remove	= qoriq_tmu_remove,
> +};
> +module_platform_driver(qoriq_tmu);
> +
> +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.1.0.27.g96db324
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

RE: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Hongtao Jia]

Eduardo,

Thanks for your comments.
See my answers inline.

---
Best Regards,
Hongtao


> -----Original Message-----
> From: Eduardo Valentin [mailto:edubezval@gmail.com]
> Sent: Tuesday, May 12, 2015 9:49 AM
> To: Jia Hongtao-B38951
> Cc: rui.zhang@intel.com; linux-pm@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; Wood Scott-B07421
> Subject: Re: [PATCH] QorIQ/TMU: add thermal management support based on
> TMU
>=20
> Jia Hongtao,
>=20
> Thanks for sharing your driver. Sorry for the late answer. Please find
> couple of comments as follows.
>=20
> On Fri, Apr 03, 2015 at 03:11:27PM +0800, Jia Hongtao wrote:
> > It supports one critical trip point and one passive trip point.
> > The cpufreq is used as the cooling device to throttle CPUs when the
> > passive trip is crossed.
> >
> > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > ---
> >  drivers/thermal/Kconfig         |  11 ++
> >  drivers/thermal/Makefile        |   1 +
> >  drivers/thermal/qoriq_thermal.c | 405
> > ++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 417 insertions(+)
> >  create mode 100644 drivers/thermal/qoriq_thermal.c
> >
> > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > af40db0..c0a8bd1 100644
> > --- a/drivers/thermal/Kconfig
> > +++ b/drivers/thermal/Kconfig
> > @@ -147,6 +147,17 @@ config IMX_THERMAL
> >  	  cpufreq is used as the cooling device to throttle CPUs when the
> >  	  passive trip is crossed.
> >
> > +config QORIQ_THERMAL
> > +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> > +	depends on CPU_THERMAL
> > +	depends on OF
> > +	default n
> > +	help
> > +	  Enable thermal management based on Freescale QorIQ Thermal
> Monitoring
> > +	  Unit (TMU). It supports one critical trip point and one passive
> trip
> > +	  point. The cpufreq is used as the cooling device to throttle CPUs
> when
> > +	  the passive trip is crossed.
>=20
> dummy question, what is the level of overlap between QorIQ and IMX
> thermal drivers?

Actually they both have two trip points.
Besides, they have no others in common per my understanding.

>=20
> > +
> >  config SPEAR_THERMAL
> >  	bool "SPEAr thermal sensor driver"
> >  	depends on PLAT_SPEAR
> > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > fa0dc48..7de4847 100644
> > --- a/drivers/thermal/Makefile
> > +++ b/drivers/thermal/Makefile
> > @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+=3D dove_thermal.o
> >  obj-$(CONFIG_DB8500_THERMAL)	+=3D db8500_thermal.o
> >  obj-$(CONFIG_ARMADA_THERMAL)	+=3D armada_thermal.o
> >  obj-$(CONFIG_IMX_THERMAL)	+=3D imx_thermal.o
> > +obj-$(CONFIG_QORIQ_THERMAL)	+=3D qoriq_thermal.o
> >  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+=3D db8500_cpufreq_cooling.o
> >  obj-$(CONFIG_INTEL_POWERCLAMP)	+=3D intel_powerclamp.o
> >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+=3D x86_pkg_temp_thermal.o
> > diff --git a/drivers/thermal/qoriq_thermal.c
> > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > 0000000..f5d3a2c
> > --- /dev/null
> > +++ b/drivers/thermal/qoriq_thermal.c
> > @@ -0,0 +1,405 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + */
> > +
> > +/*
> > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)  */
> > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h> #include
> > +<linux/module.h> #include <linux/platform_device.h> #include
> > +<linux/err.h> #include <linux/io.h> #include <linux/of.h> #include
> > +<linux/thermal.h>
> > +
> > +#define SITES_MAX		16
> > +
> > +#define TMU_TEMP_PASSIVE	85000
> > +#define TMU_TEMP_CRITICAL	95000
> > +
> > +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> > +#define TMU_POLLING_DELAY	5000
> > +
> > +/* The driver supports 1 passive trip point and 1 critical trip point
> > +*/ enum tmu_thermal_trip {
> > +	TMU_TRIP_PASSIVE,
> > +	TMU_TRIP_CRITICAL,
> > +	TMU_TRIP_NUM,
> > +};
> > +
>=20
> the above symbol is not used in this driver.

TMU_TRIP_CRITICAL is not used but it is defined to make this symbol list cl=
ear.

>=20
> > +/*
> > + * QorIQ TMU Registers
> > + */
> > +struct qoriq_tmu_site_regs {
> > +	__be32 tritsr;		/* Immediate Temperature Site Register */
> > +	__be32 tratsr;		/* Average Temperature Site Register */
> > +	u8 res0[0x8];
> > +} __packed;
> > +
> > +struct qoriq_tmu_regs {
> > +	__be32 tmr;		/* Mode Register */
> > +#define TMR_DISABLE	0x0
> > +#define TMR_ME		0x80000000
> > +#define TMR_ALPF	0x0c000000
> > +#define TMR_MSITE	0x00008000
> > +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> > +	__be32 tsr;		/* Status Register */
> > +	__be32 tmtmir;		/* Temperature measurement interval
> Register */
> > +#define TMTMIR_DEFAULT	0x00000007
> > +	u8 res0[0x14];
> > +	__be32 tier;		/* Interrupt Enable Register */
> > +#define TIER_DISABLE	0x0
> > +	__be32 tidr;		/* Interrupt Detect Register */
> > +	__be32 tiscr;		/* Interrupt Site Capture Register */
> > +	__be32 ticscr;		/* Interrupt Critical Site Capture Register
> */
> > +	u8 res1[0x10];
> > +	__be32 tmhtcrh;		/* High Temperature Capture Register */
> > +	__be32 tmhtcrl;		/* Low Temperature Capture Register */
> > +	u8 res2[0x8];
> > +	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
> > +	__be32 tmhtatr;		/* High Temperature Average Threshold */
> > +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
> > +	u8 res3[0x24];
> > +	__be32 ttcfgr;		/* Temperature Configuration Register */
> > +	__be32 tscfgr;		/* Sensor Configuration Register */
> > +	u8 res4[0x78];
> > +	struct qoriq_tmu_site_regs site[SITES_MAX];
> > +	u8 res5[0x9f8];
> > +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> > +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> > +	u8 res6[0x310];
> > +	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
> > +	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
> > +	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
> > +	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
> > +};
> > +
> > +/*
> > + * Thermal zone data
> > + */
> > +struct qoriq_tmu_data {
> > +	struct thermal_zone_device *tz;
> > +	struct thermal_cooling_device *cdev;
> > +	enum thermal_device_mode mode;
> > +	unsigned long temp_passive;
> > +	unsigned long temp_critical;
> > +	struct qoriq_tmu_regs __iomem *regs; };
> > +
> > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > +			enum thermal_device_mode *mode)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*mode =3D data->mode;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > +			enum thermal_device_mode mode)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	if (mode =3D=3D THERMAL_DEVICE_ENABLED) {
> > +		tz->polling_delay =3D TMU_POLLING_DELAY;
> > +		tz->passive_delay =3D TMU_PASSIVE_DELAY;
> > +		thermal_zone_device_update(tz);
> > +	} else {
> > +		tz->polling_delay =3D 0;
> > +		tz->passive_delay =3D 0;
> > +	}
> > +
> > +	data->mode =3D mode;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long
> > +*temp) {
> > +	u8 val;
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	val =3D ioread32be(&data->regs->site[0].tritsr);
> > +	*temp =3D (unsigned long)val * 1000;
> > +
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> > +			     enum thermal_trip_type *type) {
> > +	*type =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > +					     THERMAL_TRIP_CRITICAL;
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> > +			     unsigned long *temp)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*temp =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? data->temp_passive :
> > +					     data->temp_critical;
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > +			     unsigned long *temp)
> > +{
> > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > +
> > +	*temp =3D data->temp_critical;
>=20
> nip: add an empty line, to follow your pattern.

Sorry and thanks for the correction.

>=20
> > +	return 0;
> > +}
> > +
> > +static int tmu_get_trend(struct thermal_zone_device *thermal,
> > +			int trip, enum thermal_trend *trend) {
> > +	int ret;
> > +	unsigned long trip_temp;
> > +
> > +	ret =3D tmu_get_trip_temp(thermal, trip, &trip_temp);
> > +	if (ret < 0)
> > +		return ret;
> > +
> > +	if (thermal->temperature >=3D trip_temp)
> > +		*trend =3D THERMAL_TREND_RAISE_FULL;
> > +	else
> > +		*trend =3D THERMAL_TREND_DROP_FULL;
> > +
>=20
>=20
> Did I miss something here
> or that is not really trending, is it?
>=20
> Trending is supposed to be
> delta(temperature)/delta(time).
>=20

That's right, trending is what you said.

Here is what and why I provide this trend ops like this:
It provides a simple strategy of thermal management.
(Not care about trending, care about current temperature.)
- When the temperature is higher than the first trip point we'd like to
  reduce the cpufreq to minimum immediately and hold it steady.

Using "step_wise" may cause the following issue:
- If the sensor report the temperature up and down repeatedly like
  "90C -> 89C -> 90C -> 89C -> 90C -> ..." cpufreq will be changed
  unnecessarily.

Actually my trend ops took reference from samsumg's thermal driver back to =
3.12 kernel.
It disappeared now.

Maybe I will use the "step_wise". But discussions are needed before moving =
forward.


>=20
>=20
> > +	return 0;
> > +}
> > +
> > +static int tmu_bind(struct thermal_zone_device *tz,
> > +		    struct thermal_cooling_device *cdev)
> > +{
> > +	int ret;
> > +
> > +	ret =3D thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> > +					       THERMAL_NO_LIMIT,
> > +					       THERMAL_NO_LIMIT);
> > +	if (ret) {
> > +		dev_err(&tz->device,
> > +			"Binding zone %s with cdev %s failed:%d\n",
> > +			tz->type, cdev->type, ret);
> > +		return ret;
> > +	}
>=20
>=20
> > +
> > +	return 0;
>=20
> I think it is fine if you just return ret;

Right, will change.

>=20
> > +}
> > +
> > +static int tmu_unbind(struct thermal_zone_device *tz,
> > +		      struct thermal_cooling_device *cdev)
> > +{
> > +	int ret;
> > +
> > +	ret =3D thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> cdev);
> > +	if (ret) {
> > +		dev_err(&tz->device,
> > +			"Unbinding zone %s with cdev %s failed:%d\n",
> > +			tz->type, cdev->type, ret);
> > +		return ret;
> > +	}
>=20
> ditto.
>=20
> > +
> > +	return 0;
> > +}
> > +
> > +static void qoriq_tmu_calibration(struct platform_device *pdev)
> > +{
> > +	int i, val, len;
> > +	const __be32 *calibration;
> > +	struct device_node *node =3D pdev->dev.of_node;
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > +
> > +	/* Disable monitoring before calibration */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	calibration =3D of_get_property(node, "calibration", &len);
> > +	if (calibration =3D=3D NULL) {
> > +		pr_err("TMU: Failed to get calibration data.\n");
>=20
> use dev_err when possible.

Right, will change.

>=20
> > +		return;
> > +	}
> > +
> > +	for (i =3D 0; i < len; i +=3D 8, calibration +=3D 2) {
> > +		val =3D (int)of_read_number(calibration, 1);
> > +		iowrite32be(val, &data->regs->ttcfgr);
> > +		val =3D (int)of_read_number(calibration + 1, 1);
> > +		iowrite32be(val, &data->regs->tscfgr);
>=20
> are the above properties your offset and slope extrapolation constants?

The offset is constant, but the total number of properties pairs is not.

>=20
> If yes, please use the coefficients DT property. Please, check the of
> thermal code.
>=20
> > +	}
> > +}
> > +
> > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> > +{
> > +	/* Disable interrupt, using polling instead */
> > +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> > +
> > +	/* Set update_interval */
> > +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > +
> > +	/* Enable monitoring */
> > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > +}
> > +
> > +static struct thermal_zone_device_ops tmu_tz_ops =3D {
> > +	.bind =3D tmu_bind,
> > +	.unbind =3D tmu_unbind,
> > +	.get_temp =3D tmu_get_temp,
> > +	.get_trend =3D tmu_get_trend,
> > +	.get_mode =3D tmu_get_mode,
> > +	.set_mode =3D tmu_set_mode,
> > +	.get_trip_type =3D tmu_get_trip_type,
> > +	.get_trip_temp =3D tmu_get_trip_temp,
> > +	.get_crit_temp =3D tmu_get_crit_temp,
> > +};
> > +
> > +static int qoriq_tmu_probe(struct platform_device *pdev)
> > +{
> > +	int ret;
> > +	struct cpumask clip_cpus;
> > +	struct qoriq_tmu_data *data;
> > +
> > +	if (!cpufreq_get_current_driver()) {
> > +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > +		return -EPROBE_DEFER;
> > +	}
> > +
> > +	if (!pdev->dev.of_node) {
> > +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> > +		return -EFAULT;
> > +	}
> > +
> > +	data =3D devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > +			    GFP_KERNEL);
> > +	if (!data)
> > +		return -ENOMEM;
> > +
> > +	dev_set_drvdata(&pdev->dev, data);
> > +	data->regs =3D of_iomap(pdev->dev.of_node, 0);
> > +
> > +	if (!data->regs) {
> > +		dev_err(&pdev->dev, "Failed to get memory region\n");
> > +		ret =3D -ENODEV;
> > +		goto err_iomap;
> > +	}
> > +
> > +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> > +
> > +	qoriq_tmu_init_device(data);	/* TMU initialization */
> > +
> > +	cpumask_setall(&clip_cpus);
> > +	data->cdev =3D cpufreq_cooling_register(&clip_cpus);
>=20
> Given that this is a DT based device driver, have you considered using
> OF thermal APIs?

This driver was developed based on kernel 3.12 back then. If I'd like to
use OF thermal APIs is there an reference driver available?

>=20
> > +	if (IS_ERR(data->cdev)) {
> > +		ret =3D PTR_ERR(data->cdev);
> > +		dev_err(&data->cdev->device,
> > +			"Failed to register cpufreq cooling device: %d\n", ret);
> > +		goto err_cooling;
> > +	}
> > +
> > +	data->temp_passive =3D TMU_TEMP_PASSIVE;
> > +	data->temp_critical =3D TMU_TEMP_CRITICAL;
> > +	data->tz =3D thermal_zone_device_register("tmu_thermal_zone",
> > +						TMU_TRIP_NUM,
> > +						0, data,
> > +						&tmu_tz_ops, NULL,
> > +						TMU_PASSIVE_DELAY,
> > +						TMU_POLLING_DELAY);
> > +
> > +	if (IS_ERR(data->tz)) {
> > +		ret =3D PTR_ERR(data->tz);
> > +		dev_err(&pdev->dev,
> > +			"Failed to register thermal zone device %d\n", ret);
> > +		goto err_thermal;
> > +	}
> > +
> > +	data->mode =3D THERMAL_DEVICE_ENABLED;
>=20
>=20
> Don't you need to get a clock and enable it before handling this sensor?

I did it in qoriq_tmu_init_device() already if you mean it.

>=20
> > +
> > +	return 0;
> > +
> > +err_thermal:
> > +	cpufreq_cooling_unregister(data->cdev);
> > +
> > +err_cooling:
> > +	iounmap(data->regs);
> > +
> > +err_iomap:
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +	devm_kfree(&pdev->dev, data);
> > +
> > +	return ret;
> > +}
> > +
> > +static int qoriq_tmu_remove(struct platform_device *pdev)
> > +{
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > +
> > +	/* Disable monitoring */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	thermal_zone_device_unregister(data->tz);
> > +	cpufreq_cooling_unregister(data->cdev);
> > +	iounmap(data->regs);
> > +
> > +	dev_set_drvdata(&pdev->dev, NULL);
> > +	devm_kfree(&pdev->dev, data);
> > +
> > +	return 0;
> > +}
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int qoriq_tmu_suspend(struct device *dev)
> > +{
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > +
> > +	/* Disable monitoring */
> > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > +
> > +	return 0;
> > +}
> > +
> > +static int qoriq_tmu_resume(struct device *dev)
> > +{
> > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > +
> > +	/* Enable monitoring */
> > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > +
> > +	return 0;
> > +}
> > +#endif
> > +
> > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> > +
> > +static const struct of_device_id qoriq_tmu_match[] =3D {
> > +	{ .compatible =3D "fsl,qoriq-tmu", },
> > +	{},
> > +};
>=20
>=20
> You need to add a binding file describing your chip, and how
> to deploy its DT nodes under:
>  Documentation/devicetree/bindings/thermal/

Already did in another patch:
http://patchwork.ozlabs.org/patch/461412/

>=20
>=20
> > +
> > +static struct platform_driver qoriq_tmu =3D {
> > +	.driver	=3D {
> > +		.owner		=3D THIS_MODULE,
> > +		.name		=3D "qoriq_thermal",
> > +		.pm =3D &qoriq_tmu_pm_ops,
> > +		.of_match_table	=3D qoriq_tmu_match,
> > +	},
> > +	.probe	=3D qoriq_tmu_probe,
> > +	.remove	=3D qoriq_tmu_remove,
> > +};
> > +module_platform_driver(qoriq_tmu);
> > +
> > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.1.0.27.g96db324
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Eduardo Valentin]

[-- Attachment #1: Type: text/plain, Size: 19845 bytes --]

On Tue, May 12, 2015 at 08:17:21AM +0000, Hongtao Jia wrote:
> Eduardo,
> 
> Thanks for your comments.
> See my answers inline.
> 
> ---
> Best Regards,
> Hongtao
> 
> 
> > -----Original Message-----
> > From: Eduardo Valentin [mailto:edubezval@gmail.com]
> > Sent: Tuesday, May 12, 2015 9:49 AM
> > To: Jia Hongtao-B38951
> > Cc: rui.zhang@intel.com; linux-pm@vger.kernel.org; linuxppc-
> > dev@lists.ozlabs.org; Wood Scott-B07421
> > Subject: Re: [PATCH] QorIQ/TMU: add thermal management support based on
> > TMU
> > 
> > Jia Hongtao,
> > 
> > Thanks for sharing your driver. Sorry for the late answer. Please find
> > couple of comments as follows.
> > 
> > On Fri, Apr 03, 2015 at 03:11:27PM +0800, Jia Hongtao wrote:
> > > It supports one critical trip point and one passive trip point.
> > > The cpufreq is used as the cooling device to throttle CPUs when the
> > > passive trip is crossed.
> > >
> > > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > > ---
> > >  drivers/thermal/Kconfig         |  11 ++
> > >  drivers/thermal/Makefile        |   1 +
> > >  drivers/thermal/qoriq_thermal.c | 405
> > > ++++++++++++++++++++++++++++++++++++++++
> > >  3 files changed, 417 insertions(+)
> > >  create mode 100644 drivers/thermal/qoriq_thermal.c
> > >
> > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index
> > > af40db0..c0a8bd1 100644
> > > --- a/drivers/thermal/Kconfig
> > > +++ b/drivers/thermal/Kconfig
> > > @@ -147,6 +147,17 @@ config IMX_THERMAL
> > >  	  cpufreq is used as the cooling device to throttle CPUs when the
> > >  	  passive trip is crossed.
> > >
> > > +config QORIQ_THERMAL
> > > +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> > > +	depends on CPU_THERMAL
> > > +	depends on OF
> > > +	default n
> > > +	help
> > > +	  Enable thermal management based on Freescale QorIQ Thermal
> > Monitoring
> > > +	  Unit (TMU). It supports one critical trip point and one passive
> > trip
> > > +	  point. The cpufreq is used as the cooling device to throttle CPUs
> > when
> > > +	  the passive trip is crossed.
> > 
> > dummy question, what is the level of overlap between QorIQ and IMX
> > thermal drivers?
> 
> Actually they both have two trip points.
> Besides, they have no others in common per my understanding.
> 
> > 
> > > +
> > >  config SPEAR_THERMAL
> > >  	bool "SPEAr thermal sensor driver"
> > >  	depends on PLAT_SPEAR
> > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index
> > > fa0dc48..7de4847 100644
> > > --- a/drivers/thermal/Makefile
> > > +++ b/drivers/thermal/Makefile
> > > @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
> > >  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
> > >  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
> > >  obj-$(CONFIG_IMX_THERMAL)	+= imx_thermal.o
> > > +obj-$(CONFIG_QORIQ_THERMAL)	+= qoriq_thermal.o
> > >  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+= db8500_cpufreq_cooling.o
> > >  obj-$(CONFIG_INTEL_POWERCLAMP)	+= intel_powerclamp.o
> > >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+= x86_pkg_temp_thermal.o
> > > diff --git a/drivers/thermal/qoriq_thermal.c
> > > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > > 0000000..f5d3a2c
> > > --- /dev/null
> > > +++ b/drivers/thermal/qoriq_thermal.c
> > > @@ -0,0 +1,405 @@
> > > +/*
> > > + * Copyright 2015 Freescale Semiconductor, Inc.
> > > + *
> > > + * This program is free software; you can redistribute it and/or
> > > +modify it
> > > + * under the terms and conditions of the GNU General Public License,
> > > + * version 2, as published by the Free Software Foundation.
> > > + *
> > > + * This program is distributed in the hope it will be useful, but
> > > +WITHOUT
> > > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> > > +or
> > > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > > +License for
> > > + * more details.
> > > + *
> > > + */
> > > +
> > > +/*
> > > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)  */
> > > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h> #include
> > > +<linux/module.h> #include <linux/platform_device.h> #include
> > > +<linux/err.h> #include <linux/io.h> #include <linux/of.h> #include
> > > +<linux/thermal.h>
> > > +
> > > +#define SITES_MAX		16
> > > +
> > > +#define TMU_TEMP_PASSIVE	85000
> > > +#define TMU_TEMP_CRITICAL	95000
> > > +
> > > +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> > > +#define TMU_POLLING_DELAY	5000
> > > +
> > > +/* The driver supports 1 passive trip point and 1 critical trip point
> > > +*/ enum tmu_thermal_trip {
> > > +	TMU_TRIP_PASSIVE,
> > > +	TMU_TRIP_CRITICAL,
> > > +	TMU_TRIP_NUM,
> > > +};
> > > +
> > 
> > the above symbol is not used in this driver.
> 
> TMU_TRIP_CRITICAL is not used but it is defined to make this symbol list clear.
> 
> > 
> > > +/*
> > > + * QorIQ TMU Registers
> > > + */
> > > +struct qoriq_tmu_site_regs {
> > > +	__be32 tritsr;		/* Immediate Temperature Site Register */
> > > +	__be32 tratsr;		/* Average Temperature Site Register */
> > > +	u8 res0[0x8];
> > > +} __packed;
> > > +
> > > +struct qoriq_tmu_regs {
> > > +	__be32 tmr;		/* Mode Register */
> > > +#define TMR_DISABLE	0x0
> > > +#define TMR_ME		0x80000000
> > > +#define TMR_ALPF	0x0c000000
> > > +#define TMR_MSITE	0x00008000
> > > +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> > > +	__be32 tsr;		/* Status Register */
> > > +	__be32 tmtmir;		/* Temperature measurement interval
> > Register */
> > > +#define TMTMIR_DEFAULT	0x00000007
> > > +	u8 res0[0x14];
> > > +	__be32 tier;		/* Interrupt Enable Register */
> > > +#define TIER_DISABLE	0x0
> > > +	__be32 tidr;		/* Interrupt Detect Register */
> > > +	__be32 tiscr;		/* Interrupt Site Capture Register */
> > > +	__be32 ticscr;		/* Interrupt Critical Site Capture Register
> > */
> > > +	u8 res1[0x10];
> > > +	__be32 tmhtcrh;		/* High Temperature Capture Register */
> > > +	__be32 tmhtcrl;		/* Low Temperature Capture Register */
> > > +	u8 res2[0x8];
> > > +	__be32 tmhtitr;		/* High Temperature Immediate Threshold */
> > > +	__be32 tmhtatr;		/* High Temperature Average Threshold */
> > > +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold */
> > > +	u8 res3[0x24];
> > > +	__be32 ttcfgr;		/* Temperature Configuration Register */
> > > +	__be32 tscfgr;		/* Sensor Configuration Register */
> > > +	u8 res4[0x78];
> > > +	struct qoriq_tmu_site_regs site[SITES_MAX];
> > > +	u8 res5[0x9f8];
> > > +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> > > +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> > > +	u8 res6[0x310];
> > > +	__be32 ttr0cr;		/* Temperature Range 0 Control Register */
> > > +	__be32 ttr1cr;		/* Temperature Range 1 Control Register */
> > > +	__be32 ttr2cr;		/* Temperature Range 2 Control Register */
> > > +	__be32 ttr3cr;		/* Temperature Range 3 Control Register */
> > > +};
> > > +
> > > +/*
> > > + * Thermal zone data
> > > + */
> > > +struct qoriq_tmu_data {
> > > +	struct thermal_zone_device *tz;
> > > +	struct thermal_cooling_device *cdev;
> > > +	enum thermal_device_mode mode;
> > > +	unsigned long temp_passive;
> > > +	unsigned long temp_critical;
> > > +	struct qoriq_tmu_regs __iomem *regs; };
> > > +
> > > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > > +			enum thermal_device_mode *mode)
> > > +{
> > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > +
> > > +	*mode = data->mode;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > > +			enum thermal_device_mode mode)
> > > +{
> > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > +
> > > +	if (mode == THERMAL_DEVICE_ENABLED) {
> > > +		tz->polling_delay = TMU_POLLING_DELAY;
> > > +		tz->passive_delay = TMU_PASSIVE_DELAY;
> > > +		thermal_zone_device_update(tz);
> > > +	} else {
> > > +		tz->polling_delay = 0;
> > > +		tz->passive_delay = 0;
> > > +	}
> > > +
> > > +	data->mode = mode;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned long
> > > +*temp) {
> > > +	u8 val;
> > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > +
> > > +	val = ioread32be(&data->regs->site[0].tritsr);
> > > +	*temp = (unsigned long)val * 1000;
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_get_trip_type(struct thermal_zone_device *tz, int trip,
> > > +			     enum thermal_trip_type *type) {
> > > +	*type = (trip == TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > > +					     THERMAL_TRIP_CRITICAL;
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int trip,
> > > +			     unsigned long *temp)
> > > +{
> > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > +
> > > +	*temp = (trip == TMU_TRIP_PASSIVE) ? data->temp_passive :
> > > +					     data->temp_critical;
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > > +			     unsigned long *temp)
> > > +{
> > > +	struct qoriq_tmu_data *data = tz->devdata;
> > > +
> > > +	*temp = data->temp_critical;
> > 
> > nip: add an empty line, to follow your pattern.
> 
> Sorry and thanks for the correction.
> 
> > 
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_get_trend(struct thermal_zone_device *thermal,
> > > +			int trip, enum thermal_trend *trend) {
> > > +	int ret;
> > > +	unsigned long trip_temp;
> > > +
> > > +	ret = tmu_get_trip_temp(thermal, trip, &trip_temp);
> > > +	if (ret < 0)
> > > +		return ret;
> > > +
> > > +	if (thermal->temperature >= trip_temp)
> > > +		*trend = THERMAL_TREND_RAISE_FULL;
> > > +	else
> > > +		*trend = THERMAL_TREND_DROP_FULL;
> > > +
> > 
> > 
> > Did I miss something here
> > or that is not really trending, is it?
> > 
> > Trending is supposed to be
> > delta(temperature)/delta(time).
> > 
> 
> That's right, trending is what you said.
> 
> Here is what and why I provide this trend ops like this:
> It provides a simple strategy of thermal management.
> (Not care about trending, care about current temperature.)
> - When the temperature is higher than the first trip point we'd like to
>   reduce the cpufreq to minimum immediately and hold it steady.
> 
> Using "step_wise" may cause the following issue:
> - If the sensor report the temperature up and down repeatedly like
>   "90C -> 89C -> 90C -> 89C -> 90C -> ..." cpufreq will be changed
>   unnecessarily.
> 
> Actually my trend ops took reference from samsumg's thermal driver back to 3.12 kernel.
> It disappeared now.
> 
> Maybe I will use the "step_wise". But discussions are needed before moving forward.
> 
> 
> > 
> > 
> > > +	return 0;
> > > +}
> > > +
> > > +static int tmu_bind(struct thermal_zone_device *tz,
> > > +		    struct thermal_cooling_device *cdev)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE, cdev,
> > > +					       THERMAL_NO_LIMIT,
> > > +					       THERMAL_NO_LIMIT);
> > > +	if (ret) {
> > > +		dev_err(&tz->device,
> > > +			"Binding zone %s with cdev %s failed:%d\n",
> > > +			tz->type, cdev->type, ret);
> > > +		return ret;
> > > +	}
> > 
> > 
> > > +
> > > +	return 0;
> > 
> > I think it is fine if you just return ret;
> 
> Right, will change.
> 
> > 
> > > +}
> > > +
> > > +static int tmu_unbind(struct thermal_zone_device *tz,
> > > +		      struct thermal_cooling_device *cdev)
> > > +{
> > > +	int ret;
> > > +
> > > +	ret = thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > cdev);
> > > +	if (ret) {
> > > +		dev_err(&tz->device,
> > > +			"Unbinding zone %s with cdev %s failed:%d\n",
> > > +			tz->type, cdev->type, ret);
> > > +		return ret;
> > > +	}
> > 
> > ditto.
> > 
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static void qoriq_tmu_calibration(struct platform_device *pdev)
> > > +{
> > > +	int i, val, len;
> > > +	const __be32 *calibration;
> > > +	struct device_node *node = pdev->dev.of_node;
> > > +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > > +
> > > +	/* Disable monitoring before calibration */
> > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > +
> > > +	calibration = of_get_property(node, "calibration", &len);
> > > +	if (calibration == NULL) {
> > > +		pr_err("TMU: Failed to get calibration data.\n");
> > 
> > use dev_err when possible.
> 
> Right, will change.
> 
> > 
> > > +		return;
> > > +	}
> > > +
> > > +	for (i = 0; i < len; i += 8, calibration += 2) {
> > > +		val = (int)of_read_number(calibration, 1);
> > > +		iowrite32be(val, &data->regs->ttcfgr);
> > > +		val = (int)of_read_number(calibration + 1, 1);
> > > +		iowrite32be(val, &data->regs->tscfgr);
> > 
> > are the above properties your offset and slope extrapolation constants?
> 
> The offset is constant, but the total number of properties pairs is not.

OK. I understand. After having a look in your DT code, I realized that
what your name calibration data, it is actually a ADC conversion table.


In this case, you need to mark the property with the prefix "fsl,"
because it is specific to freescale.

BTW, I see that IMX has same property. However, I am a bit in doubt if
this property is part of DT. Does it change from chip to chip?

> 
> > 
> > If yes, please use the coefficients DT property. Please, check the of
> > thermal code.
> > 
> > > +	}
> > > +}
> > > +
> > > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data)
> > > +{
> > > +	/* Disable interrupt, using polling instead */
> > > +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> > > +
> > > +	/* Set update_interval */
> > > +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > > +
> > > +	/* Enable monitoring */
> > > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > > +}
> > > +
> > > +static struct thermal_zone_device_ops tmu_tz_ops = {
> > > +	.bind = tmu_bind,
> > > +	.unbind = tmu_unbind,
> > > +	.get_temp = tmu_get_temp,
> > > +	.get_trend = tmu_get_trend,
> > > +	.get_mode = tmu_get_mode,
> > > +	.set_mode = tmu_set_mode,
> > > +	.get_trip_type = tmu_get_trip_type,
> > > +	.get_trip_temp = tmu_get_trip_temp,
> > > +	.get_crit_temp = tmu_get_crit_temp,
> > > +};
> > > +
> > > +static int qoriq_tmu_probe(struct platform_device *pdev)
> > > +{
> > > +	int ret;
> > > +	struct cpumask clip_cpus;
> > > +	struct qoriq_tmu_data *data;
> > > +
> > > +	if (!cpufreq_get_current_driver()) {
> > > +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > > +		return -EPROBE_DEFER;
> > > +	}
> > > +
> > > +	if (!pdev->dev.of_node) {
> > > +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> > > +		return -EFAULT;
> > > +	}
> > > +
> > > +	data = devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > > +			    GFP_KERNEL);
> > > +	if (!data)
> > > +		return -ENOMEM;
> > > +
> > > +	dev_set_drvdata(&pdev->dev, data);
> > > +	data->regs = of_iomap(pdev->dev.of_node, 0);
> > > +
> > > +	if (!data->regs) {
> > > +		dev_err(&pdev->dev, "Failed to get memory region\n");
> > > +		ret = -ENODEV;
> > > +		goto err_iomap;
> > > +	}
> > > +
> > > +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> > > +
> > > +	qoriq_tmu_init_device(data);	/* TMU initialization */
> > > +
> > > +	cpumask_setall(&clip_cpus);
> > > +	data->cdev = cpufreq_cooling_register(&clip_cpus);
> > 
> > Given that this is a DT based device driver, have you considered using
> > OF thermal APIs?
> 
> This driver was developed based on kernel 3.12 back then. If I'd like to
> use OF thermal APIs is there an reference driver available?

Just check the latest linus kernel tree:  drivers/thermal/of-thermal.c

> 
> > 
> > > +	if (IS_ERR(data->cdev)) {
> > > +		ret = PTR_ERR(data->cdev);
> > > +		dev_err(&data->cdev->device,
> > > +			"Failed to register cpufreq cooling device: %d\n", ret);
> > > +		goto err_cooling;
> > > +	}
> > > +
> > > +	data->temp_passive = TMU_TEMP_PASSIVE;
> > > +	data->temp_critical = TMU_TEMP_CRITICAL;
> > > +	data->tz = thermal_zone_device_register("tmu_thermal_zone",
> > > +						TMU_TRIP_NUM,
> > > +						0, data,
> > > +						&tmu_tz_ops, NULL,
> > > +						TMU_PASSIVE_DELAY,
> > > +						TMU_POLLING_DELAY);
> > > +
> > > +	if (IS_ERR(data->tz)) {
> > > +		ret = PTR_ERR(data->tz);
> > > +		dev_err(&pdev->dev,
> > > +			"Failed to register thermal zone device %d\n", ret);
> > > +		goto err_thermal;
> > > +	}
> > > +
> > > +	data->mode = THERMAL_DEVICE_ENABLED;
> > 
> > 
> > Don't you need to get a clock and enable it before handling this sensor?
> 
> I did it in qoriq_tmu_init_device() already if you mean it.

No, I meant the fact that you do not do clk_get clk_put anywhere.

> 
> > 
> > > +
> > > +	return 0;
> > > +
> > > +err_thermal:
> > > +	cpufreq_cooling_unregister(data->cdev);
> > > +
> > > +err_cooling:
> > > +	iounmap(data->regs);
> > > +
> > > +err_iomap:
> > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > +	devm_kfree(&pdev->dev, data);
> > > +
> > > +	return ret;
> > > +}
> > > +
> > > +static int qoriq_tmu_remove(struct platform_device *pdev)
> > > +{
> > > +	struct qoriq_tmu_data *data = dev_get_drvdata(&pdev->dev);
> > > +
> > > +	/* Disable monitoring */
> > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > +
> > > +	thermal_zone_device_unregister(data->tz);
> > > +	cpufreq_cooling_unregister(data->cdev);
> > > +	iounmap(data->regs);
> > > +
> > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > +	devm_kfree(&pdev->dev, data);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +#ifdef CONFIG_PM_SLEEP
> > > +static int qoriq_tmu_suspend(struct device *dev)
> > > +{
> > > +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > > +
> > > +	/* Disable monitoring */
> > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static int qoriq_tmu_resume(struct device *dev)
> > > +{
> > > +	struct qoriq_tmu_data *data = dev_get_drvdata(dev);
> > > +
> > > +	/* Enable monitoring */
> > > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > > +
> > > +	return 0;
> > > +}
> > > +#endif
> > > +
> > > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > > +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> > > +
> > > +static const struct of_device_id qoriq_tmu_match[] = {
> > > +	{ .compatible = "fsl,qoriq-tmu", },
> > > +	{},
> > > +};
> > 
> > 
> > You need to add a binding file describing your chip, and how
> > to deploy its DT nodes under:
> >  Documentation/devicetree/bindings/thermal/
> 
> Already did in another patch:
> http://patchwork.ozlabs.org/patch/461412/

OK. I missed that one. I will have a look.

> 
> > 
> > 
> > > +
> > > +static struct platform_driver qoriq_tmu = {
> > > +	.driver	= {
> > > +		.owner		= THIS_MODULE,
> > > +		.name		= "qoriq_thermal",
> > > +		.pm = &qoriq_tmu_pm_ops,
> > > +		.of_match_table	= qoriq_tmu_match,
> > > +	},
> > > +	.probe	= qoriq_tmu_probe,
> > > +	.remove	= qoriq_tmu_remove,
> > > +};
> > > +module_platform_driver(qoriq_tmu);
> > > +
> > > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> > > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit driver");
> > > +MODULE_LICENSE("GPL v2");
> > > --
> > > 2.1.0.27.g96db324
> > >
> > > --
> > > To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 490 bytes --]

RE: [PATCH] QorIQ/TMU: add thermal management support based on TMU

[Hongtao Jia]

Thanks for the comments.
Answered inline.


> -----Original Message-----
> From: Eduardo Valentin [mailto:edubezval@gmail.com]
> Sent: Wednesday, May 13, 2015 7:25 AM
> To: Jia Hongtao-B38951
> Cc: rui.zhang@intel.com; linux-pm@vger.kernel.org; linuxppc-
> dev@lists.ozlabs.org; Wood Scott-B07421
> Subject: Re: [PATCH] QorIQ/TMU: add thermal management support based on
> TMU
>=20
> On Tue, May 12, 2015 at 08:17:21AM +0000, Hongtao Jia wrote:
> > Eduardo,
> >
> > Thanks for your comments.
> > See my answers inline.
> >
> > ---
> > Best Regards,
> > Hongtao
> >
> >
> > > -----Original Message-----
> > > From: Eduardo Valentin [mailto:edubezval@gmail.com]
> > > Sent: Tuesday, May 12, 2015 9:49 AM
> > > To: Jia Hongtao-B38951
> > > Cc: rui.zhang@intel.com; linux-pm@vger.kernel.org; linuxppc-
> > > dev@lists.ozlabs.org; Wood Scott-B07421
> > > Subject: Re: [PATCH] QorIQ/TMU: add thermal management support based
> > > on TMU
> > >
> > > Jia Hongtao,
> > >
> > > Thanks for sharing your driver. Sorry for the late answer. Please
> > > find couple of comments as follows.
> > >
> > > On Fri, Apr 03, 2015 at 03:11:27PM +0800, Jia Hongtao wrote:
> > > > It supports one critical trip point and one passive trip point.
> > > > The cpufreq is used as the cooling device to throttle CPUs when
> > > > the passive trip is crossed.
> > > >
> > > > Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
> > > > ---
> > > >  drivers/thermal/Kconfig         |  11 ++
> > > >  drivers/thermal/Makefile        |   1 +
> > > >  drivers/thermal/qoriq_thermal.c | 405
> > > > ++++++++++++++++++++++++++++++++++++++++
> > > >  3 files changed, 417 insertions(+)  create mode 100644
> > > > drivers/thermal/qoriq_thermal.c
> > > >
> > > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> > > > index
> > > > af40db0..c0a8bd1 100644
> > > > --- a/drivers/thermal/Kconfig
> > > > +++ b/drivers/thermal/Kconfig
> > > > @@ -147,6 +147,17 @@ config IMX_THERMAL
> > > >  	  cpufreq is used as the cooling device to throttle CPUs when
> the
> > > >  	  passive trip is crossed.
> > > >
> > > > +config QORIQ_THERMAL
> > > > +	tristate "Freescale QorIQ Thermal Monitoring Unit"
> > > > +	depends on CPU_THERMAL
> > > > +	depends on OF
> > > > +	default n
> > > > +	help
> > > > +	  Enable thermal management based on Freescale QorIQ Thermal
> > > Monitoring
> > > > +	  Unit (TMU). It supports one critical trip point and one
> > > > +passive
> > > trip
> > > > +	  point. The cpufreq is used as the cooling device to
> throttle
> > > > +CPUs
> > > when
> > > > +	  the passive trip is crossed.
> > >
> > > dummy question, what is the level of overlap between QorIQ and IMX
> > > thermal drivers?
> >
> > Actually they both have two trip points.
> > Besides, they have no others in common per my understanding.
> >
> > >
> > > > +
> > > >  config SPEAR_THERMAL
> > > >  	bool "SPEAr thermal sensor driver"
> > > >  	depends on PLAT_SPEAR
> > > > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> > > > index
> > > > fa0dc48..7de4847 100644
> > > > --- a/drivers/thermal/Makefile
> > > > +++ b/drivers/thermal/Makefile
> > > > @@ -31,6 +31,7 @@ obj-$(CONFIG_DOVE_THERMAL)  	+=3D dove_thermal.o
> > > >  obj-$(CONFIG_DB8500_THERMAL)	+=3D db8500_thermal.o
> > > >  obj-$(CONFIG_ARMADA_THERMAL)	+=3D armada_thermal.o
> > > >  obj-$(CONFIG_IMX_THERMAL)	+=3D imx_thermal.o
> > > > +obj-$(CONFIG_QORIQ_THERMAL)	+=3D qoriq_thermal.o
> > > >  obj-$(CONFIG_DB8500_CPUFREQ_COOLING)	+=3D
> db8500_cpufreq_cooling.o
> > > >  obj-$(CONFIG_INTEL_POWERCLAMP)	+=3D intel_powerclamp.o
> > > >  obj-$(CONFIG_X86_PKG_TEMP_THERMAL)	+=3D x86_pkg_temp_thermal.o
> > > > diff --git a/drivers/thermal/qoriq_thermal.c
> > > > b/drivers/thermal/qoriq_thermal.c new file mode 100644 index
> > > > 0000000..f5d3a2c
> > > > --- /dev/null
> > > > +++ b/drivers/thermal/qoriq_thermal.c
> > > > @@ -0,0 +1,405 @@
> > > > +/*
> > > > + * Copyright 2015 Freescale Semiconductor, Inc.
> > > > + *
> > > > + * This program is free software; you can redistribute it and/or
> > > > +modify it
> > > > + * under the terms and conditions of the GNU General Public
> > > > +License,
> > > > + * version 2, as published by the Free Software Foundation.
> > > > + *
> > > > + * This program is distributed in the hope it will be useful, but
> > > > +WITHOUT
> > > > + * ANY WARRANTY; without even the implied warranty of
> > > > +MERCHANTABILITY or
> > > > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > > > +License for
> > > > + * more details.
> > > > + *
> > > > + */
> > > > +
> > > > +/*
> > > > + * Based on Freescale QorIQ Thermal Monitoring Unit (TMU)  */
> > > > +#include <linux/cpufreq.h> #include <linux/cpu_cooling.h>
> > > > +#include <linux/module.h> #include <linux/platform_device.h>
> > > > +#include <linux/err.h> #include <linux/io.h> #include
> > > > +<linux/of.h> #include <linux/thermal.h>
> > > > +
> > > > +#define SITES_MAX		16
> > > > +
> > > > +#define TMU_TEMP_PASSIVE	85000
> > > > +#define TMU_TEMP_CRITICAL	95000
> > > > +
> > > > +#define TMU_PASSIVE_DELAY	1000	/* Milliseconds */
> > > > +#define TMU_POLLING_DELAY	5000
> > > > +
> > > > +/* The driver supports 1 passive trip point and 1 critical trip
> > > > +point */ enum tmu_thermal_trip {
> > > > +	TMU_TRIP_PASSIVE,
> > > > +	TMU_TRIP_CRITICAL,
> > > > +	TMU_TRIP_NUM,
> > > > +};
> > > > +
> > >
> > > the above symbol is not used in this driver.
> >
> > TMU_TRIP_CRITICAL is not used but it is defined to make this symbol
> list clear.
> >
> > >
> > > > +/*
> > > > + * QorIQ TMU Registers
> > > > + */
> > > > +struct qoriq_tmu_site_regs {
> > > > +	__be32 tritsr;		/* Immediate Temperature Site
> Register */
> > > > +	__be32 tratsr;		/* Average Temperature Site Register
> */
> > > > +	u8 res0[0x8];
> > > > +} __packed;
> > > > +
> > > > +struct qoriq_tmu_regs {
> > > > +	__be32 tmr;		/* Mode Register */
> > > > +#define TMR_DISABLE	0x0
> > > > +#define TMR_ME		0x80000000
> > > > +#define TMR_ALPF	0x0c000000
> > > > +#define TMR_MSITE	0x00008000
> > > > +#define TMR_ALL		(TMR_ME | TMR_ALPF | TMR_MSITE)
> > > > +	__be32 tsr;		/* Status Register */
> > > > +	__be32 tmtmir;		/* Temperature measurement interval
> > > Register */
> > > > +#define TMTMIR_DEFAULT	0x00000007
> > > > +	u8 res0[0x14];
> > > > +	__be32 tier;		/* Interrupt Enable Register */
> > > > +#define TIER_DISABLE	0x0
> > > > +	__be32 tidr;		/* Interrupt Detect Register */
> > > > +	__be32 tiscr;		/* Interrupt Site Capture Register */
> > > > +	__be32 ticscr;		/* Interrupt Critical Site Capture
> Register
> > > */
> > > > +	u8 res1[0x10];
> > > > +	__be32 tmhtcrh;		/* High Temperature Capture Register
> */
> > > > +	__be32 tmhtcrl;		/* Low Temperature Capture Register
> */
> > > > +	u8 res2[0x8];
> > > > +	__be32 tmhtitr;		/* High Temperature Immediate
> Threshold */
> > > > +	__be32 tmhtatr;		/* High Temperature Average Threshold
> */
> > > > +	__be32 tmhtactr;	/* High Temperature Average Crit Threshold
> */
> > > > +	u8 res3[0x24];
> > > > +	__be32 ttcfgr;		/* Temperature Configuration Register
> */
> > > > +	__be32 tscfgr;		/* Sensor Configuration Register */
> > > > +	u8 res4[0x78];
> > > > +	struct qoriq_tmu_site_regs site[SITES_MAX];
> > > > +	u8 res5[0x9f8];
> > > > +	__be32 ipbrr0;		/* IP Block Revision Register 0 */
> > > > +	__be32 ipbrr1;		/* IP Block Revision Register 1 */
> > > > +	u8 res6[0x310];
> > > > +	__be32 ttr0cr;		/* Temperature Range 0 Control
> Register */
> > > > +	__be32 ttr1cr;		/* Temperature Range 1 Control
> Register */
> > > > +	__be32 ttr2cr;		/* Temperature Range 2 Control
> Register */
> > > > +	__be32 ttr3cr;		/* Temperature Range 3 Control
> Register */
> > > > +};
> > > > +
> > > > +/*
> > > > + * Thermal zone data
> > > > + */
> > > > +struct qoriq_tmu_data {
> > > > +	struct thermal_zone_device *tz;
> > > > +	struct thermal_cooling_device *cdev;
> > > > +	enum thermal_device_mode mode;
> > > > +	unsigned long temp_passive;
> > > > +	unsigned long temp_critical;
> > > > +	struct qoriq_tmu_regs __iomem *regs; };
> > > > +
> > > > +static int tmu_get_mode(struct thermal_zone_device *tz,
> > > > +			enum thermal_device_mode *mode) {
> > > > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > > > +
> > > > +	*mode =3D data->mode;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_set_mode(struct thermal_zone_device *tz,
> > > > +			enum thermal_device_mode mode) {
> > > > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > > > +
> > > > +	if (mode =3D=3D THERMAL_DEVICE_ENABLED) {
> > > > +		tz->polling_delay =3D TMU_POLLING_DELAY;
> > > > +		tz->passive_delay =3D TMU_PASSIVE_DELAY;
> > > > +		thermal_zone_device_update(tz);
> > > > +	} else {
> > > > +		tz->polling_delay =3D 0;
> > > > +		tz->passive_delay =3D 0;
> > > > +	}
> > > > +
> > > > +	data->mode =3D mode;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_get_temp(struct thermal_zone_device *tz, unsigned
> > > > +long
> > > > +*temp) {
> > > > +	u8 val;
> > > > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > > > +
> > > > +	val =3D ioread32be(&data->regs->site[0].tritsr);
> > > > +	*temp =3D (unsigned long)val * 1000;
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_get_trip_type(struct thermal_zone_device *tz, int
> trip,
> > > > +			     enum thermal_trip_type *type) {
> > > > +	*type =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
> > > > +					     THERMAL_TRIP_CRITICAL;
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_get_trip_temp(struct thermal_zone_device *tz, int
> trip,
> > > > +			     unsigned long *temp)
> > > > +{
> > > > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > > > +
> > > > +	*temp =3D (trip =3D=3D TMU_TRIP_PASSIVE) ? data->temp_passive :
> > > > +					     data->temp_critical;
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_get_crit_temp(struct thermal_zone_device *tz,
> > > > +			     unsigned long *temp)
> > > > +{
> > > > +	struct qoriq_tmu_data *data =3D tz->devdata;
> > > > +
> > > > +	*temp =3D data->temp_critical;
> > >
> > > nip: add an empty line, to follow your pattern.
> >
> > Sorry and thanks for the correction.
> >
> > >
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_get_trend(struct thermal_zone_device *thermal,
> > > > +			int trip, enum thermal_trend *trend) {
> > > > +	int ret;
> > > > +	unsigned long trip_temp;
> > > > +
> > > > +	ret =3D tmu_get_trip_temp(thermal, trip, &trip_temp);
> > > > +	if (ret < 0)
> > > > +		return ret;
> > > > +
> > > > +	if (thermal->temperature >=3D trip_temp)
> > > > +		*trend =3D THERMAL_TREND_RAISE_FULL;
> > > > +	else
> > > > +		*trend =3D THERMAL_TREND_DROP_FULL;
> > > > +
> > >
> > >
> > > Did I miss something here
> > > or that is not really trending, is it?
> > >
> > > Trending is supposed to be
> > > delta(temperature)/delta(time).
> > >
> >
> > That's right, trending is what you said.
> >
> > Here is what and why I provide this trend ops like this:
> > It provides a simple strategy of thermal management.
> > (Not care about trending, care about current temperature.)
> > - When the temperature is higher than the first trip point we'd like to
> >   reduce the cpufreq to minimum immediately and hold it steady.
> >
> > Using "step_wise" may cause the following issue:
> > - If the sensor report the temperature up and down repeatedly like
> >   "90C -> 89C -> 90C -> 89C -> 90C -> ..." cpufreq will be changed
> >   unnecessarily.
> >
> > Actually my trend ops took reference from samsumg's thermal driver back
> to 3.12 kernel.
> > It disappeared now.
> >
> > Maybe I will use the "step_wise". But discussions are needed before
> moving forward.
> >
> >
> > >
> > >
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int tmu_bind(struct thermal_zone_device *tz,
> > > > +		    struct thermal_cooling_device *cdev) {
> > > > +	int ret;
> > > > +
> > > > +	ret =3D thermal_zone_bind_cooling_device(tz, TMU_TRIP_PASSIVE,
> cdev,
> > > > +					       THERMAL_NO_LIMIT,
> > > > +					       THERMAL_NO_LIMIT);
> > > > +	if (ret) {
> > > > +		dev_err(&tz->device,
> > > > +			"Binding zone %s with cdev %s failed:%d\n",
> > > > +			tz->type, cdev->type, ret);
> > > > +		return ret;
> > > > +	}
> > >
> > >
> > > > +
> > > > +	return 0;
> > >
> > > I think it is fine if you just return ret;
> >
> > Right, will change.
> >
> > >
> > > > +}
> > > > +
> > > > +static int tmu_unbind(struct thermal_zone_device *tz,
> > > > +		      struct thermal_cooling_device *cdev) {
> > > > +	int ret;
> > > > +
> > > > +	ret =3D thermal_zone_unbind_cooling_device(tz, TMU_TRIP_PASSIVE,
> > > cdev);
> > > > +	if (ret) {
> > > > +		dev_err(&tz->device,
> > > > +			"Unbinding zone %s with cdev %s failed:%d\n",
> > > > +			tz->type, cdev->type, ret);
> > > > +		return ret;
> > > > +	}
> > >
> > > ditto.
> > >
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static void qoriq_tmu_calibration(struct platform_device *pdev) {
> > > > +	int i, val, len;
> > > > +	const __be32 *calibration;
> > > > +	struct device_node *node =3D pdev->dev.of_node;
> > > > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > > > +
> > > > +	/* Disable monitoring before calibration */
> > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > +
> > > > +	calibration =3D of_get_property(node, "calibration", &len);
> > > > +	if (calibration =3D=3D NULL) {
> > > > +		pr_err("TMU: Failed to get calibration data.\n");
> > >
> > > use dev_err when possible.
> >
> > Right, will change.
> >
> > >
> > > > +		return;
> > > > +	}
> > > > +
> > > > +	for (i =3D 0; i < len; i +=3D 8, calibration +=3D 2) {
> > > > +		val =3D (int)of_read_number(calibration, 1);
> > > > +		iowrite32be(val, &data->regs->ttcfgr);
> > > > +		val =3D (int)of_read_number(calibration + 1, 1);
> > > > +		iowrite32be(val, &data->regs->tscfgr);
> > >
> > > are the above properties your offset and slope extrapolation
> constants?
> >
> > The offset is constant, but the total number of properties pairs is not=
.
>=20
> OK. I understand. After having a look in your DT code, I realized that
> what your name calibration data, it is actually a ADC conversion table.
>=20
>=20
> In this case, you need to mark the property with the prefix "fsl,"
> because it is specific to freescale.

Right, Thanks.

>=20
> BTW, I see that IMX has same property. However, I am a bit in doubt if
> this property is part of DT. Does it change from chip to chip?

It does vary from chip to chip.

>=20
> >
> > >
> > > If yes, please use the coefficients DT property. Please, check the
> > > of thermal code.
> > >
> > > > +	}
> > > > +}
> > > > +
> > > > +static void qoriq_tmu_init_device(struct qoriq_tmu_data *data) {
> > > > +	/* Disable interrupt, using polling instead */
> > > > +	iowrite32be(TIER_DISABLE, &data->regs->tier);
> > > > +
> > > > +	/* Set update_interval */
> > > > +	iowrite32be(TMTMIR_DEFAULT, &data->regs->tmtmir);
> > > > +
> > > > +	/* Enable monitoring */
> > > > +	iowrite32be(TMR_ALL, &data->regs->tmr); }
> > > > +
> > > > +static struct thermal_zone_device_ops tmu_tz_ops =3D {
> > > > +	.bind =3D tmu_bind,
> > > > +	.unbind =3D tmu_unbind,
> > > > +	.get_temp =3D tmu_get_temp,
> > > > +	.get_trend =3D tmu_get_trend,
> > > > +	.get_mode =3D tmu_get_mode,
> > > > +	.set_mode =3D tmu_set_mode,
> > > > +	.get_trip_type =3D tmu_get_trip_type,
> > > > +	.get_trip_temp =3D tmu_get_trip_temp,
> > > > +	.get_crit_temp =3D tmu_get_crit_temp, };
> > > > +
> > > > +static int qoriq_tmu_probe(struct platform_device *pdev) {
> > > > +	int ret;
> > > > +	struct cpumask clip_cpus;
> > > > +	struct qoriq_tmu_data *data;
> > > > +
> > > > +	if (!cpufreq_get_current_driver()) {
> > > > +		dev_dbg(&pdev->dev, "No cpufreq driver yet\n");
> > > > +		return -EPROBE_DEFER;
> > > > +	}
> > > > +
> > > > +	if (!pdev->dev.of_node) {
> > > > +		dev_err(&pdev->dev, "Device OF-Node is NULL");
> > > > +		return -EFAULT;
> > > > +	}
> > > > +
> > > > +	data =3D devm_kzalloc(&pdev->dev, sizeof(struct qoriq_tmu_data),
> > > > +			    GFP_KERNEL);
> > > > +	if (!data)
> > > > +		return -ENOMEM;
> > > > +
> > > > +	dev_set_drvdata(&pdev->dev, data);
> > > > +	data->regs =3D of_iomap(pdev->dev.of_node, 0);
> > > > +
> > > > +	if (!data->regs) {
> > > > +		dev_err(&pdev->dev, "Failed to get memory region\n");
> > > > +		ret =3D -ENODEV;
> > > > +		goto err_iomap;
> > > > +	}
> > > > +
> > > > +	qoriq_tmu_calibration(pdev);	/* TMU calibration */
> > > > +
> > > > +	qoriq_tmu_init_device(data);	/* TMU initialization */
> > > > +
> > > > +	cpumask_setall(&clip_cpus);
> > > > +	data->cdev =3D cpufreq_cooling_register(&clip_cpus);
> > >
> > > Given that this is a DT based device driver, have you considered
> > > using OF thermal APIs?
> >
> > This driver was developed based on kernel 3.12 back then. If I'd like
> > to use OF thermal APIs is there an reference driver available?
>=20
> Just check the latest linus kernel tree:  drivers/thermal/of-thermal.c
>=20
> >
> > >
> > > > +	if (IS_ERR(data->cdev)) {
> > > > +		ret =3D PTR_ERR(data->cdev);
> > > > +		dev_err(&data->cdev->device,
> > > > +			"Failed to register cpufreq cooling device: %d\n",
> ret);
> > > > +		goto err_cooling;
> > > > +	}
> > > > +
> > > > +	data->temp_passive =3D TMU_TEMP_PASSIVE;
> > > > +	data->temp_critical =3D TMU_TEMP_CRITICAL;
> > > > +	data->tz =3D thermal_zone_device_register("tmu_thermal_zone",
> > > > +						TMU_TRIP_NUM,
> > > > +						0, data,
> > > > +						&tmu_tz_ops, NULL,
> > > > +						TMU_PASSIVE_DELAY,
> > > > +						TMU_POLLING_DELAY);
> > > > +
> > > > +	if (IS_ERR(data->tz)) {
> > > > +		ret =3D PTR_ERR(data->tz);
> > > > +		dev_err(&pdev->dev,
> > > > +			"Failed to register thermal zone device %d\n",
> ret);
> > > > +		goto err_thermal;
> > > > +	}
> > > > +
> > > > +	data->mode =3D THERMAL_DEVICE_ENABLED;
> > >
> > >
> > > Don't you need to get a clock and enable it before handling this
> sensor?
> >
> > I did it in qoriq_tmu_init_device() already if you mean it.
>=20
> No, I meant the fact that you do not do clk_get clk_put anywhere.

I thought it's not needed. But as you mentioned I did some investigation.
I looked up the code and find the following sentence in the comments:
"Drivers must assume that the clock source is not enabled."

In my understanding clk_get() is for checking if the clk is ready. Right?
I will add this check if my understanding is right.

>=20
> >
> > >
> > > > +
> > > > +	return 0;
> > > > +
> > > > +err_thermal:
> > > > +	cpufreq_cooling_unregister(data->cdev);
> > > > +
> > > > +err_cooling:
> > > > +	iounmap(data->regs);
> > > > +
> > > > +err_iomap:
> > > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > > +	devm_kfree(&pdev->dev, data);
> > > > +
> > > > +	return ret;
> > > > +}
> > > > +
> > > > +static int qoriq_tmu_remove(struct platform_device *pdev) {
> > > > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(&pdev->dev);
> > > > +
> > > > +	/* Disable monitoring */
> > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > +
> > > > +	thermal_zone_device_unregister(data->tz);
> > > > +	cpufreq_cooling_unregister(data->cdev);
> > > > +	iounmap(data->regs);
> > > > +
> > > > +	dev_set_drvdata(&pdev->dev, NULL);
> > > > +	devm_kfree(&pdev->dev, data);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +#ifdef CONFIG_PM_SLEEP
> > > > +static int qoriq_tmu_suspend(struct device *dev) {
> > > > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > > > +
> > > > +	/* Disable monitoring */
> > > > +	iowrite32be(TMR_DISABLE, &data->regs->tmr);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +
> > > > +static int qoriq_tmu_resume(struct device *dev) {
> > > > +	struct qoriq_tmu_data *data =3D dev_get_drvdata(dev);
> > > > +
> > > > +	/* Enable monitoring */
> > > > +	iowrite32be(TMR_ALL, &data->regs->tmr);
> > > > +
> > > > +	return 0;
> > > > +}
> > > > +#endif
> > > > +
> > > > +static SIMPLE_DEV_PM_OPS(qoriq_tmu_pm_ops,
> > > > +			 qoriq_tmu_suspend, qoriq_tmu_resume);
> > > > +
> > > > +static const struct of_device_id qoriq_tmu_match[] =3D {
> > > > +	{ .compatible =3D "fsl,qoriq-tmu", },
> > > > +	{},
> > > > +};
> > >
> > >
> > > You need to add a binding file describing your chip, and how to
> > > deploy its DT nodes under:
> > >  Documentation/devicetree/bindings/thermal/
> >
> > Already did in another patch:
> > http://patchwork.ozlabs.org/patch/461412/
>=20
> OK. I missed that one. I will have a look.
>=20
> >
> > >
> > >
> > > > +
> > > > +static struct platform_driver qoriq_tmu =3D {
> > > > +	.driver	=3D {
> > > > +		.owner		=3D THIS_MODULE,
> > > > +		.name		=3D "qoriq_thermal",
> > > > +		.pm =3D &qoriq_tmu_pm_ops,
> > > > +		.of_match_table	=3D qoriq_tmu_match,
> > > > +	},
> > > > +	.probe	=3D qoriq_tmu_probe,
> > > > +	.remove	=3D qoriq_tmu_remove,
> > > > +};
> > > > +module_platform_driver(qoriq_tmu);
> > > > +
> > > > +MODULE_AUTHOR("Jia Hongtao <hongtao.jia@freescale.com>");
> > > > +MODULE_DESCRIPTION("Freescale QorIQ Thermal Monitoring Unit
> > > > +driver"); MODULE_LICENSE("GPL v2");
> > > > --
> > > > 2.1.0.27.g96db324
> > > >
> > > > --
> > > > To unsubscribe from this list: send the line "unsubscribe
> > > > linux-pm" in the body of a message to majordomo@vger.kernel.org
> > > > More majordomo info at  http://vger.kernel.org/majordomo-info.html