linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: bhelgaas@google.com, linux-pci@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, gwshan@linux.vnet.ibm.com
Subject: Re: [PATCH V4 01/11] pci/iov: rename and export virtfn_add/virtfn_remove
Date: Fri, 15 May 2015 15:56:25 +1000	[thread overview]
Message-ID: <20150515055625.GA27029@gwshan> (raw)
In-Reply-To: <1431668786-30371-2-git-send-email-weiyang@linux.vnet.ibm.com>

On Fri, May 15, 2015 at 01:46:16PM +0800, Wei Yang wrote:
>During the EEH recovery, when a device's driver is not EEH aware or no
>driver is bound with a device, EEH core would do hotplug on this device.
>While it isn't feasible for a VF with usual hotplug procedure. During
>removal of a VF, virtual bus should be removed if necessary. During the
>re-creation, the pci_scan_slot() doesn't work on a VF.
>
>This patch exports two functions to handle the hotplug case for VF
>properly. They will be invoked when the EEH core does the hotplug case for
>VFs.
>
>Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>

Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>

Thanks,
Gavin

>---
> drivers/pci/iov.c   |   10 +++++-----
> include/linux/pci.h |    2 ++
> 2 files changed, 7 insertions(+), 5 deletions(-)
>
>diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
>index 47daf2f..f353e6f 100644
>--- a/drivers/pci/iov.c
>+++ b/drivers/pci/iov.c
>@@ -106,7 +106,7 @@ resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno)
> 	return dev->sriov->barsz[resno - PCI_IOV_RESOURCES];
> }
>
>-static int virtfn_add(struct pci_dev *dev, int id, int reset)
>+int pci_iov_virtfn_add(struct pci_dev *dev, int id, int reset)
> {
> 	int i;
> 	int rc = -ENOMEM;
>@@ -181,7 +181,7 @@ failed:
> 	return rc;
> }
>
>-static void virtfn_remove(struct pci_dev *dev, int id, int reset)
>+void pci_iov_virtfn_remove(struct pci_dev *dev, int id, int reset)
> {
> 	struct pci_dev *virtfn;
>
>@@ -302,7 +302,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
> 	}
>
> 	for (i = 0; i < initial; i++) {
>-		rc = virtfn_add(dev, i, 0);
>+		rc = pci_iov_virtfn_add(dev, i, 0);
> 		if (rc)
> 			goto failed;
> 	}
>@@ -314,7 +314,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn)
>
> failed:
> 	for (j = 0; j < i; j++)
>-		virtfn_remove(dev, j, 0);
>+		pci_iov_virtfn_remove(dev, j, 0);
>
> 	iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE);
> 	pci_cfg_access_lock(dev);
>@@ -343,7 +343,7 @@ static void sriov_disable(struct pci_dev *dev)
> 		return;
>
> 	for (i = 0; i < iov->num_VFs; i++)
>-		virtfn_remove(dev, i, 0);
>+		pci_iov_virtfn_remove(dev, i, 0);
>
> 	pcibios_sriov_disable(dev);
>
>diff --git a/include/linux/pci.h b/include/linux/pci.h
>index 353db8d..94bacfa 100644
>--- a/include/linux/pci.h
>+++ b/include/linux/pci.h
>@@ -1679,6 +1679,8 @@ int pci_iov_virtfn_devfn(struct pci_dev *dev, int id);
>
> int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn);
> void pci_disable_sriov(struct pci_dev *dev);
>+int pci_iov_virtfn_add(struct pci_dev *dev, int id, int reset);
>+void pci_iov_virtfn_remove(struct pci_dev *dev, int id, int reset);
> int pci_num_vf(struct pci_dev *dev);
> int pci_vfs_assigned(struct pci_dev *dev);
> int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs);
>-- 
>1.7.9.5
>

  reply	other threads:[~2015-05-15  5:57 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-15  5:46 [PATCH V4 00/11] VF EEH on Power8 Wei Yang
2015-05-15  5:46 ` [PATCH V4 01/11] pci/iov: rename and export virtfn_add/virtfn_remove Wei Yang
2015-05-15  5:56   ` Gavin Shan [this message]
2015-05-15  5:46 ` [PATCH V4 02/11] powerpc/pci_dn: cache vf_index in pci_dn Wei Yang
2015-05-15  5:57   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 03/11] powerpc/pci: remove PCI devices in reverse order Wei Yang
2015-05-15  5:46 ` [PATCH V4 04/11] powerpc/eeh: cache address range just for normal device Wei Yang
2015-05-15  5:46 ` [PATCH V4 05/11] powerpc/powernv: create/release eeh_dev for VF Wei Yang
2015-05-15  6:19   ` Gavin Shan
2015-05-15  8:53     ` Wei Yang
2015-05-15  5:46 ` [PATCH V4 06/11] powerpc/eeh: create EEH_PE_VF for VF PE Wei Yang
2015-05-15  6:26   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 07/11] powerpc/powernv: Support EEH reset for VFs Wei Yang
2015-05-15  7:12   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 08/11] powerpc/powernv: Support PCI config restore " Wei Yang
2015-05-15  7:27   ` Gavin Shan
2015-05-15  9:18     ` Wei Yang
2015-05-15  5:46 ` [PATCH V4 09/11] powerpc/eeh: handle VF PE properly Wei Yang
2015-05-15  7:31   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 10/11] powerpc/powernv: use "compound" as the child's list_head for compound PE Wei Yang
2015-05-15  7:37   ` Gavin Shan
2015-05-15  5:46 ` [PATCH V4 11/11] powerpc/powernv: compound PE for VFs Wei Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150515055625.GA27029@gwshan \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).