linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Gavin Shan <gwshan@linux.vnet.ibm.com>
To: Wei Yang <weiyang@linux.vnet.ibm.com>
Cc: gwshan@linux.vnet.ibm.com, bhelgaas@google.com,
	mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org,
	linux-pci@vger.kernel.org, aik@ozlabs.ru
Subject: Re: [PATCH V9 11/11] powerpc/powernv: compound PE for VFs
Date: Wed, 9 Sep 2015 12:48:21 +1000	[thread overview]
Message-ID: <20150909024820.GA6808@gwshan> (raw)
In-Reply-To: <20150729031718.GA18069@richard>

On Wed, Jul 29, 2015 at 11:17:18AM +0800, Wei Yang wrote:
>Hi, Michael
>
>Hope you didn't take this yet. We may change this patch a little.
>

[Cc Alexey who might concern the SRIOV status]

Richard, do you have plan to get it upstream? It seems it's hanged
over here for long time.

>On Fri, Jul 17, 2015 at 02:02:41PM +0800, Wei Yang wrote:
>>When VF BAR size is larger than 64MB, we group VFs in terms of M64 BAR,
>>which means those VFs in a group should form a compound PE.
>>
>>This patch links those VF PEs into compound PE in this case.
>>
>>[gwshan: code refactoring for a bit]
>>Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
>>Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
>>---
>> arch/powerpc/platforms/powernv/pci-ioda.c |   46 +++++++++++++++++++++++++----
>> arch/powerpc/platforms/powernv/pci.c      |   17 +++++++++--
>> 2 files changed, 56 insertions(+), 7 deletions(-)
>>
>>diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
>>index 5738d31..d1530cb 100644
>>--- a/arch/powerpc/platforms/powernv/pci-ioda.c
>>+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
>>@@ -1359,9 +1359,20 @@ static void pnv_ioda_release_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>> 	}
>>
>> 	list_for_each_entry_safe(pe, pe_n, &phb->ioda.pe_list, list) {
>>+		struct pnv_ioda_pe *s, *sn;
>> 		if (pe->parent_dev != pdev)
>> 			continue;
>>
>>+		if ((pe->flags & PNV_IODA_PE_MASTER) &&
>>+		    (pe->flags & PNV_IODA_PE_VF)) {
>>+			list_for_each_entry_safe(s, sn, &pe->slaves, list) {
>>+				pnv_pci_ioda2_release_dma_pe(pdev, s);
>>+				list_del(&s->list);
>>+				pnv_ioda_deconfigure_pe(phb, s);
>>+				pnv_ioda_free_pe(phb, s->pe_number);
>>+			}
>>+		}
>>+
>> 		pnv_pci_ioda2_release_dma_pe(pdev, pe);
>>
>> 		/* Remove from list */
>>@@ -1414,7 +1425,7 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>> 	struct pci_bus        *bus;
>> 	struct pci_controller *hose;
>> 	struct pnv_phb        *phb;
>>-	struct pnv_ioda_pe    *pe;
>>+	struct pnv_ioda_pe    *pe, *master_pe;
>> 	int                    pe_num;
>> 	u16                    vf_index;
>> 	struct pci_dn         *pdn;
>>@@ -1456,10 +1467,13 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>> 			continue;
>> 		}
>>
>>-		/* Put PE to the list */
>>-		mutex_lock(&phb->ioda.pe_list_mutex);
>>-		list_add_tail(&pe->list, &phb->ioda.pe_list);
>>-		mutex_unlock(&phb->ioda.pe_list_mutex);
>>+		/* Put PE to the list, or postpone it for compound PEs */
>>+		if ((pdn->m64_per_iov != M64_PER_IOV) ||
>>+		    (num_vfs <= M64_PER_IOV)) {
>>+			mutex_lock(&phb->ioda.pe_list_mutex);
>>+			list_add_tail(&pe->list, &phb->ioda.pe_list);
>>+			mutex_unlock(&phb->ioda.pe_list_mutex);
>>+		}
>>
>> 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
>> 	}
>>@@ -1472,10 +1486,32 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
>> 		vf_per_group = roundup_pow_of_two(num_vfs) / pdn->m64_per_iov;
>>
>> 		for (vf_group = 0; vf_group < M64_PER_IOV; vf_group++) {
>>+			master_pe = NULL;
>>+
>> 			for (vf_index = vf_group * vf_per_group;
>> 			     vf_index < (vf_group + 1) * vf_per_group &&
>> 			     vf_index < num_vfs;
>> 			     vf_index++) {
>>+
>>+				/*
>>+				 * Figure out the master PE and put all slave
>>+				 * PEs to master PE's list.
>>+				 */
>>+				pe = &phb->ioda.pe_array[pdn->offset + vf_index];
>>+				if (!master_pe) {
>>+					pe->flags |= PNV_IODA_PE_MASTER;
>>+					INIT_LIST_HEAD(&pe->slaves);
>>+					master_pe = pe;
>>+					mutex_lock(&phb->ioda.pe_list_mutex);
>>+					list_add_tail(&pe->list, &phb->ioda.pe_list);
>>+					mutex_unlock(&phb->ioda.pe_list_mutex);
>>+				} else {
>>+					pe->flags |= PNV_IODA_PE_SLAVE;
>>+					pe->master = master_pe;
>>+					list_add_tail(&pe->list,
>>+						&master_pe->slaves);
>>+				}
>>+
>> 				for (vf_index1 = vf_group * vf_per_group;
>> 				     vf_index1 < (vf_group + 1) * vf_per_group &&
>> 				     vf_index1 < num_vfs;
>>diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c
>>index 0e4f42e..f3aead0 100644
>>--- a/arch/powerpc/platforms/powernv/pci.c
>>+++ b/arch/powerpc/platforms/powernv/pci.c
>>@@ -739,7 +739,7 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
>> 	struct pci_controller *hose = pci_bus_to_host(pdev->bus);
>> 	struct pnv_phb *phb = hose->private_data;
>> #ifdef CONFIG_PCI_IOV
>>-	struct pnv_ioda_pe *pe;
>>+	struct pnv_ioda_pe *pe, *slave;
>> 	struct pci_dn *pdn;
>>
>> 	/* Fix the VF pdn PE number */
>>@@ -751,10 +751,23 @@ void pnv_pci_dma_dev_setup(struct pci_dev *pdev)
>> 			    (pdev->devfn & 0xff))) {
>> 				pdn->pe_number = pe->pe_number;
>> 				pe->pdev = pdev;
>>-				break;
>>+				goto found;
>>+			}
>>+
>>+			if ((pe->flags & PNV_IODA_PE_MASTER) &&
>>+			    (pe->flags & PNV_IODA_PE_VF)) {
>>+				list_for_each_entry(slave, &pe->slaves, list) {
>>+					if (slave->rid == ((pdev->bus->number << 8)
>>+					   | (pdev->devfn & 0xff))) {
>>+						pdn->pe_number = slave->pe_number;
>>+						slave->pdev = pdev;
>>+						goto found;
>>+					}
>>+				}
>> 			}
>> 		}
>> 	}
>>+found:
>> #endif /* CONFIG_PCI_IOV */
>>
>> 	if (phb && phb->dma_dev_setup)
>>-- 
>>1.7.9.5
>
>-- 
>Richard Yang
>Help you, Help me

  reply	other threads:[~2015-09-09  2:49 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-07-17  6:02 [PATCH V9 00/11] VF EEH on Power8 Wei Yang
2015-07-17  6:02 ` [PATCH V9 01/11] PCI/IOV: Rename and export virtfn_add/virtfn_remove Wei Yang
2015-07-17  6:02 ` [PATCH V9 02/11] PCI: Add pcibios_bus_add_device() weak function Wei Yang
2015-07-17  6:02 ` [PATCH V9 03/11] powerpc/pci: Cache VF index in pci_dn Wei Yang
2015-07-17  6:02 ` [PATCH V9 04/11] powerpc/pci: Remove VFs prior to PF Wei Yang
2015-07-17  6:02 ` [PATCH V9 05/11] powerpc/eeh: Cache only BARs, not windows or IOV BARs Wei Yang
2015-07-17  6:02 ` [PATCH V9 06/11] powerpc/powernv: EEH device for VF Wei Yang
2015-07-17  6:02 ` [PATCH V9 07/11] powerpc/eeh: Create PE for VFs Wei Yang
2015-07-17  6:02 ` [PATCH V9 08/11] powerpc/powernv: Support EEH reset for VF PE Wei Yang
2015-07-17  6:02 ` [PATCH V9 09/11] powerpc/powernv: Support PCI config restore for VFs Wei Yang
2015-07-17  6:02 ` [PATCH V9 10/11] powerpc/eeh: Support error recovery for VF PE Wei Yang
2015-07-17  6:02 ` [PATCH V9 11/11] powerpc/powernv: compound PE for VFs Wei Yang
2015-07-29  3:17   ` Wei Yang
2015-09-09  2:48     ` Gavin Shan [this message]
2015-09-09  3:36       ` Richard Yang
2015-09-09  3:52         ` Gavin Shan
2015-09-09  6:00           ` Richard Yang
2015-09-09  4:59         ` Benjamin Herrenschmidt
2015-09-09  5:53           ` Richard Yang
2015-09-09  5:22         ` Alexey Kardashevskiy
2015-09-09  6:01           ` Richard Yang
2015-09-17  0:28             ` Gavin Shan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150909024820.GA6808@gwshan \
    --to=gwshan@linux.vnet.ibm.com \
    --cc=aik@ozlabs.ru \
    --cc=bhelgaas@google.com \
    --cc=linux-pci@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=weiyang@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).