* Re: input: i8042: build failure on powerpc [not found] ` <20151112154117.GA21686@roeck-us.net> @ 2015-11-13 8:35 ` LABBE Corentin 2015-11-13 14:45 ` Guenter Roeck 0 siblings, 1 reply; 2+ messages in thread From: LABBE Corentin @ 2015-11-13 8:35 UTC (permalink / raw) To: Guenter Roeck; +Cc: dmitry.torokhov, linux-input, linux-kernel, linuxppc-dev On Thu, Nov 12, 2015 at 07:41:17AM -0800, Guenter Roeck wrote: > On Thu, Nov 12, 2015 at 04:01:45PM +0100, LABBE Corentin wrote: > > Hello > > > > I have made a random .config for testing my powerpc cross-compiler and I got this fail: > > > > In general it helps to provide the broken configuration. > > If you do some digging, you may notice that this has been broken > since commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc"), > or in other words since 2008. CONFIG_INPUT is not set with walnut_defconfig, > which may explain why no one noticed. > > I would suggest to just remove the offending code. Quite obviously it is dead. > Just for be clear, you suggest that I make a patch for removing powerpc support of the i8042 driver ? I have add linuxppc-dev@lists.ozlabs.org to the discution. Regards > > LD init/built-in.o > > drivers/built-in.o: In function `i8042_wait_write': > > i8042.c:(.text+0x13d8be): undefined reference to `kb_cs' > > i8042.c:(.text+0x13d8c6): undefined reference to `kb_cs' > > i8042.c:(.text+0x13d8e6): undefined reference to `kb_cs' > > drivers/built-in.o: In function `i8042_kbd_write': > > i8042.c:(.text+0x13d9aa): undefined reference to `kb_data' > > i8042.c:(.text+0x13d9ae): undefined reference to `kb_data' > > drivers/built-in.o: In function `i8042_flush': > > i8042.c:(.text+0x13da56): undefined reference to `kb_cs' > > i8042.c:(.text+0x13da62): undefined reference to `kb_cs' > > i8042.c:(.text+0x13da66): undefined reference to `kb_data' > > i8042.c:(.text+0x13da86): undefined reference to `kb_data' > > drivers/built-in.o: In function `i8042_panic_blink': > > i8042.c:(.text+0x13db92): undefined reference to `kb_cs' > > i8042.c:(.text+0x13db9a): undefined reference to `kb_cs' > > i8042.c:(.text+0x13dc06): undefined reference to `kb_data' > > i8042.c:(.text+0x13dc16): undefined reference to `kb_data' > > i8042.c:(.text+0x13dc8a): undefined reference to `kb_data' > > drivers/built-in.o: In function `i8042_interrupt': > > i8042.c:(.text+0x13dd1a): undefined reference to `kb_cs' > > i8042.c:(.text+0x13dd1e): undefined reference to `kb_cs' > > i8042.c:(.text+0x13dd3e): undefined reference to `kb_data' > > i8042.c:(.text+0x13dd42): undefined reference to `kb_data' > > drivers/built-in.o: In function `__i8042_command': > > i8042.c:(.text+0x13e2b6): undefined reference to `kb_cs' > > i8042.c:(.text+0x13e2be): undefined reference to `kb_cs' > > i8042.c:(.text+0x13e2ea): undefined reference to `kb_data' > > i8042.c:(.text+0x13e302): undefined reference to `kb_data' > > i8042.c:(.text+0x13e34e): undefined reference to `kb_cs' > > i8042.c:(.text+0x13e362): undefined reference to `kb_cs' > > i8042.c:(.text+0x13e366): undefined reference to `kb_data' > > i8042.c:(.text+0x13e3de): undefined reference to `kb_data' > > drivers/built-in.o: In function `i8042_aux_test_irq': > > i8042.c:(.init.text+0x59a2): undefined reference to `kb_cs' > > i8042.c:(.init.text+0x59a6): undefined reference to `kb_cs' > > i8042.c:(.init.text+0x59ca): undefined reference to `kb_data' > > i8042.c:(.init.text+0x59ce): undefined reference to `kb_data' > > drivers/built-in.o: In function `i8042_probe': > > i8042.c:(.init.text+0x5dda): undefined reference to `kb_cs' > > i8042.c:(.init.text+0x5dde): undefined reference to `kb_cs' > > i8042.c:(.init.text+0x6366): undefined reference to `kb_data' > > i8042.c:(.init.text+0x6376): undefined reference to `kb_cs' > > i8042.c:(.init.text+0x637a): undefined reference to `kb_data' > > Makefile:929: recipe for target 'vmlinux' failed > > > > it seems that kb_data and kb_cs (declared as extern in drivers/input/serio/i8042-ppcio.h) are defined anywhere. > > > > Regards ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: input: i8042: build failure on powerpc 2015-11-13 8:35 ` input: i8042: build failure on powerpc LABBE Corentin @ 2015-11-13 14:45 ` Guenter Roeck 0 siblings, 0 replies; 2+ messages in thread From: Guenter Roeck @ 2015-11-13 14:45 UTC (permalink / raw) To: LABBE Corentin; +Cc: dmitry.torokhov, linux-input, linux-kernel, linuxppc-dev On 11/13/2015 12:35 AM, LABBE Corentin wrote: > On Thu, Nov 12, 2015 at 07:41:17AM -0800, Guenter Roeck wrote: >> On Thu, Nov 12, 2015 at 04:01:45PM +0100, LABBE Corentin wrote: >>> Hello >>> >>> I have made a random .config for testing my powerpc cross-compiler and I got this fail: >>> >> >> In general it helps to provide the broken configuration. >> >> If you do some digging, you may notice that this has been broken >> since commit 917f0af9e5a9 ("powerpc: Remove arch/ppc and include/asm-ppc"), >> or in other words since 2008. CONFIG_INPUT is not set with walnut_defconfig, >> which may explain why no one noticed. >> >> I would suggest to just remove the offending code. Quite obviously it is dead. >> > > Just for be clear, you suggest that I make a patch for removing powerpc support of the i8042 driver ? > I have add linuxppc-dev@lists.ozlabs.org to the discution. > s/powerpc/walnut/ Guenter > Regards > >>> LD init/built-in.o >>> drivers/built-in.o: In function `i8042_wait_write': >>> i8042.c:(.text+0x13d8be): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13d8c6): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13d8e6): undefined reference to `kb_cs' >>> drivers/built-in.o: In function `i8042_kbd_write': >>> i8042.c:(.text+0x13d9aa): undefined reference to `kb_data' >>> i8042.c:(.text+0x13d9ae): undefined reference to `kb_data' >>> drivers/built-in.o: In function `i8042_flush': >>> i8042.c:(.text+0x13da56): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13da62): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13da66): undefined reference to `kb_data' >>> i8042.c:(.text+0x13da86): undefined reference to `kb_data' >>> drivers/built-in.o: In function `i8042_panic_blink': >>> i8042.c:(.text+0x13db92): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13db9a): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13dc06): undefined reference to `kb_data' >>> i8042.c:(.text+0x13dc16): undefined reference to `kb_data' >>> i8042.c:(.text+0x13dc8a): undefined reference to `kb_data' >>> drivers/built-in.o: In function `i8042_interrupt': >>> i8042.c:(.text+0x13dd1a): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13dd1e): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13dd3e): undefined reference to `kb_data' >>> i8042.c:(.text+0x13dd42): undefined reference to `kb_data' >>> drivers/built-in.o: In function `__i8042_command': >>> i8042.c:(.text+0x13e2b6): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13e2be): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13e2ea): undefined reference to `kb_data' >>> i8042.c:(.text+0x13e302): undefined reference to `kb_data' >>> i8042.c:(.text+0x13e34e): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13e362): undefined reference to `kb_cs' >>> i8042.c:(.text+0x13e366): undefined reference to `kb_data' >>> i8042.c:(.text+0x13e3de): undefined reference to `kb_data' >>> drivers/built-in.o: In function `i8042_aux_test_irq': >>> i8042.c:(.init.text+0x59a2): undefined reference to `kb_cs' >>> i8042.c:(.init.text+0x59a6): undefined reference to `kb_cs' >>> i8042.c:(.init.text+0x59ca): undefined reference to `kb_data' >>> i8042.c:(.init.text+0x59ce): undefined reference to `kb_data' >>> drivers/built-in.o: In function `i8042_probe': >>> i8042.c:(.init.text+0x5dda): undefined reference to `kb_cs' >>> i8042.c:(.init.text+0x5dde): undefined reference to `kb_cs' >>> i8042.c:(.init.text+0x6366): undefined reference to `kb_data' >>> i8042.c:(.init.text+0x6376): undefined reference to `kb_cs' >>> i8042.c:(.init.text+0x637a): undefined reference to `kb_data' >>> Makefile:929: recipe for target 'vmlinux' failed >>> >>> it seems that kb_data and kb_cs (declared as extern in drivers/input/serio/i8042-ppcio.h) are defined anywhere. >>> >>> Regards > ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-11-13 14:46 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20151112150145.GC3758@Red>
[not found] ` <20151112154117.GA21686@roeck-us.net>
2015-11-13 8:35 ` input: i8042: build failure on powerpc LABBE Corentin
2015-11-13 14:45 ` Guenter Roeck
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).