[PATCH V3 0/3] add spba clock for fsl audio IP

[PATCH V3 0/3] add spba clock for fsl audio IP

[Shengjiu Wang]

add spba clock for fsl audio IP

Changes in V3
- update the comments for clock description.

Shengjiu Wang (3):
  ASoC: fsl_esai: spba clock is needed by esai device
  ASoC: fsl_spdif: spba clk is needed by spdif device
  ASoC: fsl_asrc: spba clock is needed by asrc device

 Documentation/devicetree/bindings/sound/fsl,asrc.txt  |  5 +++++
 Documentation/devicetree/bindings/sound/fsl,esai.txt  |  5 +++++
 Documentation/devicetree/bindings/sound/fsl,spdif.txt |  5 +++++
 sound/soc/fsl/fsl_asrc.c                              | 10 ++++++++++
 sound/soc/fsl/fsl_asrc.h                              |  2 ++
 sound/soc/fsl/fsl_esai.c                              | 13 +++++++++++++
 sound/soc/fsl/fsl_spdif.c                             | 15 +++++++++++++++
 7 files changed, 55 insertions(+)

-- 
1.9.1

[PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Shengjiu Wang]

ESAI need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ESAI registers.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,esai.txt |  5 +++++
 sound/soc/fsl/fsl_esai.c                             | 13 +++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
index d3b6b5f..cd3ee5d 100644
--- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
@@ -27,6 +27,11 @@ Required properties:
 			  derive HCK, SCK and FS.
 	"fsys"		  The system clock derived from ahb clock used to
 			  derive HCK, SCK and FS.
+	"spba"		  The spba clock is required when ESAI is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
   - fsl,fifo-depth	: The number of elements in the transmit and receive
 			  FIFOs. This number is the maximum allowed value for
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 504e731..4d7589c 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -35,6 +35,7 @@
  * @coreclk: clock source to access register
  * @extalclk: esai clock source to derive HCK, SCK and FS
  * @fsysclk: system clock source to derive HCK, SCK and FS
+ * @spbaclk: SPBA clock (optional, depending on SoC design)
  * @fifo_depth: depth of tx/rx FIFO
  * @slot_width: width of each DAI slot
  * @slots: number of slots
@@ -54,6 +55,7 @@ struct fsl_esai {
 	struct clk *coreclk;
 	struct clk *extalclk;
 	struct clk *fsysclk;
+	struct clk *spbaclk;
 	u32 fifo_depth;
 	u32 slot_width;
 	u32 slots;
@@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 	ret = clk_prepare_enable(esai_priv->coreclk);
 	if (ret)
 		return ret;
+	ret = clk_prepare_enable(esai_priv->spbaclk);
+	if (ret)
+		goto err_spbaclk;
 	if (!IS_ERR(esai_priv->extalclk)) {
 		ret = clk_prepare_enable(esai_priv->extalclk);
 		if (ret)
@@ -499,6 +504,8 @@ err_fsysclk:
 	if (!IS_ERR(esai_priv->extalclk))
 		clk_disable_unprepare(esai_priv->extalclk);
 err_extalck:
+	clk_disable_unprepare(esai_priv->spbaclk);
+err_spbaclk:
 	clk_disable_unprepare(esai_priv->coreclk);
 
 	return ret;
@@ -564,6 +571,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
 		clk_disable_unprepare(esai_priv->fsysclk);
 	if (!IS_ERR(esai_priv->extalclk))
 		clk_disable_unprepare(esai_priv->extalclk);
+	clk_disable_unprepare(esai_priv->spbaclk);
 	clk_disable_unprepare(esai_priv->coreclk);
 }
 
@@ -819,6 +827,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
 				PTR_ERR(esai_priv->fsysclk));
 
+	esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+	if (IS_ERR(esai_priv->spbaclk))
+		dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
+				PTR_ERR(esai_priv->spbaclk));
+
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
-- 
1.9.1

Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Nicolin Chen]

On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:

> @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
>  	ret = clk_prepare_enable(esai_priv->coreclk);
>  	if (ret)
>  		return ret;
> +	ret = clk_prepare_enable(esai_priv->spbaclk);
> +	if (ret)
> +		goto err_spbaclk;
>  	if (!IS_ERR(esai_priv->extalclk)) {
>  		ret = clk_prepare_enable(esai_priv->extalclk);
>  		if (ret)

Just like for extalclk there is a IS_ERR check out there, there
should be one for spbaclk as well. Otherwise....

root@imx6qdlsolo:~# aplay /unit_tests/audio8k16S.wav 
[   29.956250] Unable to handle kernel paging request at virtual address fffffffe
[   29.963491] pgd = edd98000
[   29.966278] [fffffffe] *pgd=afffd861, *pte=00000000, *ppte=00000000
[   29.972615] Internal error: Oops: 37 [#1] SMP ARM
[   29.977327] Modules linked in:
[   29.980410] CPU: 0 PID: 755 Comm: aplay Not tainted 4.4.0-rc1-12414-gcc8db17 #250
[   29.987899] Hardware name: Freescale i.MX6 SoloX (Device Tree)
[   29.993738] task: edece780 ti: ed26a000 task.ti: ed26a000
[   29.999156] PC is at clk_prepare+0x18/0x38
[   30.003268] LR is at mark_held_locks+0x70/0x98
[   30.007720] pc : [<c0568714>]    lr : [<c006f42c>]    psr: 600f0013
[   30.007720] sp : ed26bc60  ip : 00000003  fp : ed26bc74
[   30.019204] r10: eebe4d9c  r9 : eeb2e00c  r8 : eeb2e00c
[   30.024435] r7 : fffffffe  r6 : eeb2c500  r5 : eeb2d0c0  r4 : fffffffe
[   30.030966] r3 : edece780  r2 : 00000001  r1 : 00000001  r0 : 00000001
[   30.037502] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
[   30.044643] Control: 10c5387d  Table: add9804a  DAC: 00000051
[   30.050395] Process aplay (pid: 755, stack limit = 0xed26a210)

Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Shengjiu Wang]

On Tue, Nov 24, 2015 at 12:33:45AM -0800, Nicolin Chen wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> 
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
> >  	ret = clk_prepare_enable(esai_priv->coreclk);
> >  	if (ret)
> >  		return ret;
> > +	ret = clk_prepare_enable(esai_priv->spbaclk);
> > +	if (ret)
> > +		goto err_spbaclk;
> >  	if (!IS_ERR(esai_priv->extalclk)) {
> >  		ret = clk_prepare_enable(esai_priv->extalclk);
> >  		if (ret)
> 
> Just like for extalclk there is a IS_ERR check out there, there
> should be one for spbaclk as well. Otherwise....
> 
> root@imx6qdlsolo:~# aplay /unit_tests/audio8k16S.wav 
> [   29.956250] Unable to handle kernel paging request at virtual address fffffffe
> [   29.963491] pgd = edd98000
> [   29.966278] [fffffffe] *pgd=afffd861, *pte=00000000, *ppte=00000000
> [   29.972615] Internal error: Oops: 37 [#1] SMP ARM
> [   29.977327] Modules linked in:
> [   29.980410] CPU: 0 PID: 755 Comm: aplay Not tainted 4.4.0-rc1-12414-gcc8db17 #250
> [   29.987899] Hardware name: Freescale i.MX6 SoloX (Device Tree)
> [   29.993738] task: edece780 ti: ed26a000 task.ti: ed26a000
> [   29.999156] PC is at clk_prepare+0x18/0x38
> [   30.003268] LR is at mark_held_locks+0x70/0x98
> [   30.007720] pc : [<c0568714>]    lr : [<c006f42c>]    psr: 600f0013
> [   30.007720] sp : ed26bc60  ip : 00000003  fp : ed26bc74
> [   30.019204] r10: eebe4d9c  r9 : eeb2e00c  r8 : eeb2e00c
> [   30.024435] r7 : fffffffe  r6 : eeb2c500  r5 : eeb2d0c0  r4 : fffffffe
> [   30.030966] r3 : edece780  r2 : 00000001  r1 : 00000001  r0 : 00000001
> [   30.037502] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
> [   30.044643] Control: 10c5387d  Table: add9804a  DAC: 00000051
> [   30.050395] Process aplay (pid: 755, stack limit = 0xed26a210)
>

Will fix it in next version, and send it out later.

best regards
wang shengjiu 

Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Rob Herring]

On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> ESAI need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write wrong data from/to ESAI registers.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  Documentation/devicetree/bindings/sound/fsl,esai.txt |  5 +++++

Acked-by: Rob Herring <robh@kernel.org>

>  sound/soc/fsl/fsl_esai.c                             | 13 +++++++++++++
>  2 files changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> index d3b6b5f..cd3ee5d 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> @@ -27,6 +27,11 @@ Required properties:
>  			  derive HCK, SCK and FS.
>  	"fsys"		  The system clock derived from ahb clock used to
>  			  derive HCK, SCK and FS.
> +	"spba"		  The spba clock is required when ESAI is placed as a
> +			  bus slave of the Shared Peripheral Bus and when two
> +			  or more bus masters (CPU, DMA or DSP) try to access
> +			  it. This property is optional depending on the SoC
> +			  design.
>  
>    - fsl,fifo-depth	: The number of elements in the transmit and receive
>  			  FIFOs. This number is the maximum allowed value for
> diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> index 504e731..4d7589c 100644
> --- a/sound/soc/fsl/fsl_esai.c
> +++ b/sound/soc/fsl/fsl_esai.c
> @@ -35,6 +35,7 @@
>   * @coreclk: clock source to access register
>   * @extalclk: esai clock source to derive HCK, SCK and FS
>   * @fsysclk: system clock source to derive HCK, SCK and FS
> + * @spbaclk: SPBA clock (optional, depending on SoC design)
>   * @fifo_depth: depth of tx/rx FIFO
>   * @slot_width: width of each DAI slot
>   * @slots: number of slots
> @@ -54,6 +55,7 @@ struct fsl_esai {
>  	struct clk *coreclk;
>  	struct clk *extalclk;
>  	struct clk *fsysclk;
> +	struct clk *spbaclk;
>  	u32 fifo_depth;
>  	u32 slot_width;
>  	u32 slots;
> @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
>  	ret = clk_prepare_enable(esai_priv->coreclk);
>  	if (ret)
>  		return ret;
> +	ret = clk_prepare_enable(esai_priv->spbaclk);
> +	if (ret)
> +		goto err_spbaclk;
>  	if (!IS_ERR(esai_priv->extalclk)) {
>  		ret = clk_prepare_enable(esai_priv->extalclk);
>  		if (ret)
> @@ -499,6 +504,8 @@ err_fsysclk:
>  	if (!IS_ERR(esai_priv->extalclk))
>  		clk_disable_unprepare(esai_priv->extalclk);
>  err_extalck:
> +	clk_disable_unprepare(esai_priv->spbaclk);
> +err_spbaclk:
>  	clk_disable_unprepare(esai_priv->coreclk);
>  
>  	return ret;
> @@ -564,6 +571,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
>  		clk_disable_unprepare(esai_priv->fsysclk);
>  	if (!IS_ERR(esai_priv->extalclk))
>  		clk_disable_unprepare(esai_priv->extalclk);
> +	clk_disable_unprepare(esai_priv->spbaclk);
>  	clk_disable_unprepare(esai_priv->coreclk);
>  }
>  
> @@ -819,6 +827,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
>  		dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
>  				PTR_ERR(esai_priv->fsysclk));
>  
> +	esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> +	if (IS_ERR(esai_priv->spbaclk))
> +		dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
> +				PTR_ERR(esai_priv->spbaclk));
> +
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0) {
>  		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
> -- 
> 1.9.1
> 

Re: [PATCH V3 1/3] ASoC: fsl_esai: spba clock is needed by esai device

[Shengjiu Wang]

On Tue, Nov 24, 2015 at 05:21:30PM -0600, Rob Herring wrote:
> On Tue, Nov 24, 2015 at 03:03:28PM +0800, Shengjiu Wang wrote:
> > ESAI need to enable the spba clock, when sdma is using share peripheral
> > script. In this case, there is two spba master port is used, if don't
> > enable the clock, the spba bus will have arbitration issue, which may
> > cause read/write wrong data from/to ESAI registers.
> > 
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> > ---
> >  Documentation/devicetree/bindings/sound/fsl,esai.txt |  5 +++++
> 
> Acked-by: Rob Herring <robh@kernel.org>

Hi Mark, Rob

   Just a reminder. There is V4 for this patch set. I think the "Acked-by:" is
for the V4. Thanks.

best regards
wang shengjiu

> 
> >  sound/soc/fsl/fsl_esai.c                             | 13 +++++++++++++
> >  2 files changed, 18 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > index d3b6b5f..cd3ee5d 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt
> > @@ -27,6 +27,11 @@ Required properties:
> >  			  derive HCK, SCK and FS.
> >  	"fsys"		  The system clock derived from ahb clock used to
> >  			  derive HCK, SCK and FS.
> > +	"spba"		  The spba clock is required when ESAI is placed as a
> > +			  bus slave of the Shared Peripheral Bus and when two
> > +			  or more bus masters (CPU, DMA or DSP) try to access
> > +			  it. This property is optional depending on the SoC
> > +			  design.
> >  
> >    - fsl,fifo-depth	: The number of elements in the transmit and receive
> >  			  FIFOs. This number is the maximum allowed value for
> > diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
> > index 504e731..4d7589c 100644
> > --- a/sound/soc/fsl/fsl_esai.c
> > +++ b/sound/soc/fsl/fsl_esai.c
> > @@ -35,6 +35,7 @@
> >   * @coreclk: clock source to access register
> >   * @extalclk: esai clock source to derive HCK, SCK and FS
> >   * @fsysclk: system clock source to derive HCK, SCK and FS
> > + * @spbaclk: SPBA clock (optional, depending on SoC design)
> >   * @fifo_depth: depth of tx/rx FIFO
> >   * @slot_width: width of each DAI slot
> >   * @slots: number of slots
> > @@ -54,6 +55,7 @@ struct fsl_esai {
> >  	struct clk *coreclk;
> >  	struct clk *extalclk;
> >  	struct clk *fsysclk;
> > +	struct clk *spbaclk;
> >  	u32 fifo_depth;
> >  	u32 slot_width;
> >  	u32 slots;
> > @@ -469,6 +471,9 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
> >  	ret = clk_prepare_enable(esai_priv->coreclk);
> >  	if (ret)
> >  		return ret;
> > +	ret = clk_prepare_enable(esai_priv->spbaclk);
> > +	if (ret)
> > +		goto err_spbaclk;
> >  	if (!IS_ERR(esai_priv->extalclk)) {
> >  		ret = clk_prepare_enable(esai_priv->extalclk);
> >  		if (ret)
> > @@ -499,6 +504,8 @@ err_fsysclk:
> >  	if (!IS_ERR(esai_priv->extalclk))
> >  		clk_disable_unprepare(esai_priv->extalclk);
> >  err_extalck:
> > +	clk_disable_unprepare(esai_priv->spbaclk);
> > +err_spbaclk:
> >  	clk_disable_unprepare(esai_priv->coreclk);
> >  
> >  	return ret;
> > @@ -564,6 +571,7 @@ static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
> >  		clk_disable_unprepare(esai_priv->fsysclk);
> >  	if (!IS_ERR(esai_priv->extalclk))
> >  		clk_disable_unprepare(esai_priv->extalclk);
> > +	clk_disable_unprepare(esai_priv->spbaclk);
> >  	clk_disable_unprepare(esai_priv->coreclk);
> >  }
> >  
> > @@ -819,6 +827,11 @@ static int fsl_esai_probe(struct platform_device *pdev)
> >  		dev_warn(&pdev->dev, "failed to get fsys clock: %ld\n",
> >  				PTR_ERR(esai_priv->fsysclk));
> >  
> > +	esai_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> > +	if (IS_ERR(esai_priv->spbaclk))
> > +		dev_warn(&pdev->dev, "failed to get spba clock: %ld\n",
> > +				PTR_ERR(esai_priv->spbaclk));
> > +
> >  	irq = platform_get_irq(pdev, 0);
> >  	if (irq < 0) {
> >  		dev_err(&pdev->dev, "no irq for node %s\n", pdev->name);
> > -- 
> > 1.9.1
> > 

[PATCH V3 2/3] ASoC: fsl_spdif: spba clk is needed by spdif device

[Shengjiu Wang]

SPDIF need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to SPDIF registers.

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,spdif.txt |  5 +++++
 sound/soc/fsl/fsl_spdif.c                             | 15 +++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
index b5ee32e..4ca39dd 100644
--- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
@@ -27,6 +27,11 @@ Required properties:
 			  Transceiver Clock Diagram" of SoC reference manual.
 			  It can also be referred to TxClk_Source bit of
 			  register SPDIF_STC.
+	"spba"		  The spba clock is required when SPDIF is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
    - big-endian		: If this property is absent, the native endian mode
 			  will be in use as default, or the big endian mode
diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index 28a8823..64e2a1f 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -88,6 +88,7 @@ struct spdif_mixer_control {
  * @rxclk: rx clock sources for capture
  * @coreclk: core clock for register access via DMA
  * @sysclk: system clock for rx clock rate measurement
+ * @spbaclk: SPBA clock (optional, depending on SoC design)
  * @dma_params_tx: DMA parameters for transmit channel
  * @dma_params_rx: DMA parameters for receive channel
  */
@@ -106,6 +107,7 @@ struct fsl_spdif_priv {
 	struct clk *rxclk;
 	struct clk *coreclk;
 	struct clk *sysclk;
+	struct clk *spbaclk;
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
 	struct snd_dmaengine_dai_dma_data dma_params_rx;
 	/* regcache for SRPC */
@@ -474,6 +476,12 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
 			return ret;
 		}
 
+		ret = clk_prepare_enable(spdif_priv->spbaclk);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to enable spba clock\n");
+			goto err_spbaclk;
+		}
+
 		ret = spdif_softreset(spdif_priv);
 		if (ret) {
 			dev_err(&pdev->dev, "failed to soft reset\n");
@@ -515,6 +523,8 @@ disable_txclk:
 	for (i--; i >= 0; i--)
 		clk_disable_unprepare(spdif_priv->txclk[i]);
 err:
+	clk_disable_unprepare(spdif_priv->spbaclk);
+err_spbaclk:
 	clk_disable_unprepare(spdif_priv->coreclk);
 
 	return ret;
@@ -548,6 +558,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
 		spdif_intr_status_clear(spdif_priv);
 		regmap_update_bits(regmap, REG_SPDIF_SCR,
 				SCR_LOW_POWER, SCR_LOW_POWER);
+		clk_disable_unprepare(spdif_priv->spbaclk);
 		clk_disable_unprepare(spdif_priv->coreclk);
 	}
 }
@@ -1261,6 +1272,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
 		return PTR_ERR(spdif_priv->coreclk);
 	}
 
+	spdif_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
+	if (IS_ERR(spdif_priv->spbaclk))
+		dev_warn(&pdev->dev, "no spba clock in devicetree\n");
+
 	/* Select clock source for rx/tx clock */
 	spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1");
 	if (IS_ERR(spdif_priv->rxclk)) {
-- 
1.9.1

Re: [PATCH V3 2/3] ASoC: fsl_spdif: spba clk is needed by spdif device

[Rob Herring]

On Tue, Nov 24, 2015 at 03:03:29PM +0800, Shengjiu Wang wrote:
> SPDIF need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write wrong data from/to SPDIF registers.
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  Documentation/devicetree/bindings/sound/fsl,spdif.txt |  5 +++++

For the binding:

Acked-by: Rob Herring <robh@kernel.org>

>  sound/soc/fsl/fsl_spdif.c                             | 15 +++++++++++++++
>  2 files changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> index b5ee32e..4ca39dd 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt
> @@ -27,6 +27,11 @@ Required properties:
>  			  Transceiver Clock Diagram" of SoC reference manual.
>  			  It can also be referred to TxClk_Source bit of
>  			  register SPDIF_STC.
> +	"spba"		  The spba clock is required when SPDIF is placed as a
> +			  bus slave of the Shared Peripheral Bus and when two
> +			  or more bus masters (CPU, DMA or DSP) try to access
> +			  it. This property is optional depending on the SoC
> +			  design.
>  
>     - big-endian		: If this property is absent, the native endian mode
>  			  will be in use as default, or the big endian mode
> diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
> index 28a8823..64e2a1f 100644
> --- a/sound/soc/fsl/fsl_spdif.c
> +++ b/sound/soc/fsl/fsl_spdif.c
> @@ -88,6 +88,7 @@ struct spdif_mixer_control {
>   * @rxclk: rx clock sources for capture
>   * @coreclk: core clock for register access via DMA
>   * @sysclk: system clock for rx clock rate measurement
> + * @spbaclk: SPBA clock (optional, depending on SoC design)
>   * @dma_params_tx: DMA parameters for transmit channel
>   * @dma_params_rx: DMA parameters for receive channel
>   */
> @@ -106,6 +107,7 @@ struct fsl_spdif_priv {
>  	struct clk *rxclk;
>  	struct clk *coreclk;
>  	struct clk *sysclk;
> +	struct clk *spbaclk;
>  	struct snd_dmaengine_dai_dma_data dma_params_tx;
>  	struct snd_dmaengine_dai_dma_data dma_params_rx;
>  	/* regcache for SRPC */
> @@ -474,6 +476,12 @@ static int fsl_spdif_startup(struct snd_pcm_substream *substream,
>  			return ret;
>  		}
>  
> +		ret = clk_prepare_enable(spdif_priv->spbaclk);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to enable spba clock\n");
> +			goto err_spbaclk;
> +		}
> +
>  		ret = spdif_softreset(spdif_priv);
>  		if (ret) {
>  			dev_err(&pdev->dev, "failed to soft reset\n");
> @@ -515,6 +523,8 @@ disable_txclk:
>  	for (i--; i >= 0; i--)
>  		clk_disable_unprepare(spdif_priv->txclk[i]);
>  err:
> +	clk_disable_unprepare(spdif_priv->spbaclk);
> +err_spbaclk:
>  	clk_disable_unprepare(spdif_priv->coreclk);
>  
>  	return ret;
> @@ -548,6 +558,7 @@ static void fsl_spdif_shutdown(struct snd_pcm_substream *substream,
>  		spdif_intr_status_clear(spdif_priv);
>  		regmap_update_bits(regmap, REG_SPDIF_SCR,
>  				SCR_LOW_POWER, SCR_LOW_POWER);
> +		clk_disable_unprepare(spdif_priv->spbaclk);
>  		clk_disable_unprepare(spdif_priv->coreclk);
>  	}
>  }
> @@ -1261,6 +1272,10 @@ static int fsl_spdif_probe(struct platform_device *pdev)
>  		return PTR_ERR(spdif_priv->coreclk);
>  	}
>  
> +	spdif_priv->spbaclk = devm_clk_get(&pdev->dev, "spba");
> +	if (IS_ERR(spdif_priv->spbaclk))
> +		dev_warn(&pdev->dev, "no spba clock in devicetree\n");
> +
>  	/* Select clock source for rx/tx clock */
>  	spdif_priv->rxclk = devm_clk_get(&pdev->dev, "rxtx1");
>  	if (IS_ERR(spdif_priv->rxclk)) {
> -- 
> 1.9.1
> 

[PATCH V3 3/3] ASoC: fsl_asrc: spba clock is needed by asrc device

[Shengjiu Wang]

ASRC need to enable the spba clock, when sdma is using share peripheral
script. In this case, there is two spba master port is used, if don't
enable the clock, the spba bus will have arbitration issue, which may
cause read/write wrong data from/to ASRC registers

Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
---
 Documentation/devicetree/bindings/sound/fsl,asrc.txt |  5 +++++
 sound/soc/fsl/fsl_asrc.c                             | 10 ++++++++++
 sound/soc/fsl/fsl_asrc.h                             |  2 ++
 3 files changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
index b93362a..3e26a94 100644
--- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
+++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
@@ -25,6 +25,11 @@ Required properties:
 	"mem"		  Peripheral access clock to access registers.
 	"ipg"		  Peripheral clock to driver module.
 	"asrck_<0-f>"	  Clock sources for input and output clock.
+	"spba"		  The spba clock is required when ASRC is placed as a
+			  bus slave of the Shared Peripheral Bus and when two
+			  or more bus masters (CPU, DMA or DSP) try to access
+			  it. This property is optional depending on the SoC
+			  design.
 
    - big-endian		: If this property is absent, the little endian mode
 			  will be in use as default. Otherwise, the big endian
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 9f087d4..800828e 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -859,6 +859,10 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 		return PTR_ERR(asrc_priv->ipg_clk);
 	}
 
+	asrc_priv->spba_clk = devm_clk_get(&pdev->dev, "spba");
+	if (IS_ERR(asrc_priv->spba_clk))
+		dev_warn(&pdev->dev, "failed to get spba clock\n");
+
 	for (i = 0; i < ASRC_CLK_MAX_NUM; i++) {
 		sprintf(tmp, "asrck_%x", i);
 		asrc_priv->asrck_clk[i] = devm_clk_get(&pdev->dev, tmp);
@@ -939,6 +943,9 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 	ret = clk_prepare_enable(asrc_priv->ipg_clk);
 	if (ret)
 		goto disable_mem_clk;
+	ret = clk_prepare_enable(asrc_priv->spba_clk);
+	if (ret)
+		goto disable_ipg_clk;
 	for (i = 0; i < ASRC_CLK_MAX_NUM; i++) {
 		ret = clk_prepare_enable(asrc_priv->asrck_clk[i]);
 		if (ret)
@@ -950,6 +957,8 @@ static int fsl_asrc_runtime_resume(struct device *dev)
 disable_asrck_clk:
 	for (i--; i >= 0; i--)
 		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
+	clk_disable_unprepare(asrc_priv->spba_clk);
+disable_ipg_clk:
 	clk_disable_unprepare(asrc_priv->ipg_clk);
 disable_mem_clk:
 	clk_disable_unprepare(asrc_priv->mem_clk);
@@ -963,6 +972,7 @@ static int fsl_asrc_runtime_suspend(struct device *dev)
 
 	for (i = 0; i < ASRC_CLK_MAX_NUM; i++)
 		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
+	clk_disable_unprepare(asrc_priv->spba_clk);
 	clk_disable_unprepare(asrc_priv->ipg_clk);
 	clk_disable_unprepare(asrc_priv->mem_clk);
 
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 4aed63c..68802cd 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -426,6 +426,7 @@ struct fsl_asrc_pair {
  * @paddr: physical address to the base address of registers
  * @mem_clk: clock source to access register
  * @ipg_clk: clock source to drive peripheral
+ * @spba_clk: SPBA clock (optional, depending on SoC design)
  * @asrck_clk: clock sources to driver ASRC internal logic
  * @lock: spin lock for resource protection
  * @pair: pair pointers
@@ -442,6 +443,7 @@ struct fsl_asrc {
 	unsigned long paddr;
 	struct clk *mem_clk;
 	struct clk *ipg_clk;
+	struct clk *spba_clk;
 	struct clk *asrck_clk[ASRC_CLK_MAX_NUM];
 	spinlock_t lock;
 
-- 
1.9.1

Re: [PATCH V3 3/3] ASoC: fsl_asrc: spba clock is needed by asrc device

[Rob Herring]

On Tue, Nov 24, 2015 at 03:03:30PM +0800, Shengjiu Wang wrote:
> ASRC need to enable the spba clock, when sdma is using share peripheral
> script. In this case, there is two spba master port is used, if don't
> enable the clock, the spba bus will have arbitration issue, which may
> cause read/write wrong data from/to ASRC registers
> 
> Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
> ---
>  Documentation/devicetree/bindings/sound/fsl,asrc.txt |  5 +++++

For the binding:

Acked-by: Rob Herring <robh@kernel.org>

>  sound/soc/fsl/fsl_asrc.c                             | 10 ++++++++++
>  sound/soc/fsl/fsl_asrc.h                             |  2 ++
>  3 files changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
> index b93362a..3e26a94 100644
> --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt
> @@ -25,6 +25,11 @@ Required properties:
>  	"mem"		  Peripheral access clock to access registers.
>  	"ipg"		  Peripheral clock to driver module.
>  	"asrck_<0-f>"	  Clock sources for input and output clock.
> +	"spba"		  The spba clock is required when ASRC is placed as a
> +			  bus slave of the Shared Peripheral Bus and when two
> +			  or more bus masters (CPU, DMA or DSP) try to access
> +			  it. This property is optional depending on the SoC
> +			  design.
>  
>     - big-endian		: If this property is absent, the little endian mode
>  			  will be in use as default. Otherwise, the big endian
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 9f087d4..800828e 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -859,6 +859,10 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  		return PTR_ERR(asrc_priv->ipg_clk);
>  	}
>  
> +	asrc_priv->spba_clk = devm_clk_get(&pdev->dev, "spba");
> +	if (IS_ERR(asrc_priv->spba_clk))
> +		dev_warn(&pdev->dev, "failed to get spba clock\n");
> +
>  	for (i = 0; i < ASRC_CLK_MAX_NUM; i++) {
>  		sprintf(tmp, "asrck_%x", i);
>  		asrc_priv->asrck_clk[i] = devm_clk_get(&pdev->dev, tmp);
> @@ -939,6 +943,9 @@ static int fsl_asrc_runtime_resume(struct device *dev)
>  	ret = clk_prepare_enable(asrc_priv->ipg_clk);
>  	if (ret)
>  		goto disable_mem_clk;
> +	ret = clk_prepare_enable(asrc_priv->spba_clk);
> +	if (ret)
> +		goto disable_ipg_clk;
>  	for (i = 0; i < ASRC_CLK_MAX_NUM; i++) {
>  		ret = clk_prepare_enable(asrc_priv->asrck_clk[i]);
>  		if (ret)
> @@ -950,6 +957,8 @@ static int fsl_asrc_runtime_resume(struct device *dev)
>  disable_asrck_clk:
>  	for (i--; i >= 0; i--)
>  		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
> +	clk_disable_unprepare(asrc_priv->spba_clk);
> +disable_ipg_clk:
>  	clk_disable_unprepare(asrc_priv->ipg_clk);
>  disable_mem_clk:
>  	clk_disable_unprepare(asrc_priv->mem_clk);
> @@ -963,6 +972,7 @@ static int fsl_asrc_runtime_suspend(struct device *dev)
>  
>  	for (i = 0; i < ASRC_CLK_MAX_NUM; i++)
>  		clk_disable_unprepare(asrc_priv->asrck_clk[i]);
> +	clk_disable_unprepare(asrc_priv->spba_clk);
>  	clk_disable_unprepare(asrc_priv->ipg_clk);
>  	clk_disable_unprepare(asrc_priv->mem_clk);
>  
> diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
> index 4aed63c..68802cd 100644
> --- a/sound/soc/fsl/fsl_asrc.h
> +++ b/sound/soc/fsl/fsl_asrc.h
> @@ -426,6 +426,7 @@ struct fsl_asrc_pair {
>   * @paddr: physical address to the base address of registers
>   * @mem_clk: clock source to access register
>   * @ipg_clk: clock source to drive peripheral
> + * @spba_clk: SPBA clock (optional, depending on SoC design)
>   * @asrck_clk: clock sources to driver ASRC internal logic
>   * @lock: spin lock for resource protection
>   * @pair: pair pointers
> @@ -442,6 +443,7 @@ struct fsl_asrc {
>  	unsigned long paddr;
>  	struct clk *mem_clk;
>  	struct clk *ipg_clk;
> +	struct clk *spba_clk;
>  	struct clk *asrck_clk[ASRC_CLK_MAX_NUM];
>  	spinlock_t lock;
>  
> -- 
> 1.9.1
>