[PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL

linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL
@ 2016-01-12 17:29 Lothar Waßmann
  2016-01-12 17:29 ` [PATCH 1/2] clk: imx: whitespace cleanup; no functional change Lothar Waßmann
  2016-02-25 23:56 ` [PATCH 0/2] clk: imx6: " Stephen Boyd
  0 siblings, 2 replies; 5+ messages in thread
From: Lothar Waßmann @ 2016-01-12 17:29 UTC (permalink / raw)
  To: Anson Huang, Arnd Bergmann, Bai Ping, Fabio Estevam, Frank Li,
	Fugang Duan, Ian Campbell, Jaroslav Kysela, Kumar Gala,
	Liam Girdwood, Mark Brown, Mark Rutland, Michael Turquette,
	Nicolin Chen, Pawel Moll, Rob Herring, Russell King, Sascha Hauer,
	Shawn Guo, Stephen Boyd, Takashi Iwai, Timur Tabi, Xiubo Li,
	alsa-devel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	linuxppc-dev, Lothar Waßmann

This patchset adds the clock which is necessary to operate the KPP
unit on i.MX6UL.
The first patch removes bogus whitespace before TABs in indentation.
The second patch adds the clock definition.

^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH 1/2] clk: imx: whitespace cleanup; no functional change
  2016-01-12 17:29 [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL Lothar Waßmann
@ 2016-01-12 17:29 ` Lothar Waßmann
  2016-01-12 17:29   ` [PATCH 2/2] clk: imx: add kpp clock for i.MX6UL Lothar Waßmann
  2016-02-25 23:56 ` [PATCH 0/2] clk: imx6: " Stephen Boyd
  1 sibling, 1 reply; 5+ messages in thread
From: Lothar Waßmann @ 2016-01-12 17:29 UTC (permalink / raw)
  To: Anson Huang, Arnd Bergmann, Bai Ping, Fabio Estevam, Frank Li,
	Fugang Duan, Ian Campbell, Jaroslav Kysela, Kumar Gala,
	Liam Girdwood, Mark Brown, Mark Rutland, Michael Turquette,
	Nicolin Chen, Pawel Moll, Rob Herring, Russell King, Sascha Hauer,
	Shawn Guo, Stephen Boyd, Takashi Iwai, Timur Tabi, Xiubo Li,
	alsa-devel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	linuxppc-dev, Lothar Waßmann

remove whitespace before TAB.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 drivers/clk/imx/clk-imx6ul.c             |  62 ++++++-------
 include/dt-bindings/clock/imx6ul-clock.h | 146 +++++++++++++++----------------
 2 files changed, 104 insertions(+), 104 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 08692d7..3e31ec0 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -157,9 +157,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clk_set_parent(clks[IMX6UL_PLL7_BYPASS], clks[IMX6UL_CLK_PLL7]);
 
 	clks[IMX6UL_CLK_PLL1_SYS]	= imx_clk_fixed_factor("pll1_sys",	"pll1_bypass", 1, 1);
-	clks[IMX6UL_CLK_PLL2_BUS]	= imx_clk_gate("pll2_bus", 	"pll2_bypass", base + 0x30, 13);
-	clks[IMX6UL_CLK_PLL3_USB_OTG]	= imx_clk_gate("pll3_usb_otg", 	"pll3_bypass", base + 0x10, 13);
-	clks[IMX6UL_CLK_PLL4_AUDIO]	= imx_clk_gate("pll4_audio", 	"pll4_bypass", base + 0x70, 13);
+	clks[IMX6UL_CLK_PLL2_BUS]	= imx_clk_gate("pll2_bus",	"pll2_bypass", base + 0x30, 13);
+	clks[IMX6UL_CLK_PLL3_USB_OTG]	= imx_clk_gate("pll3_usb_otg",	"pll3_bypass", base + 0x10, 13);
+	clks[IMX6UL_CLK_PLL4_AUDIO]	= imx_clk_gate("pll4_audio",	"pll4_bypass", base + 0x70, 13);
 	clks[IMX6UL_CLK_PLL5_VIDEO]	= imx_clk_gate("pll5_video",	"pll5_bypass", base + 0xa0, 13);
 	clks[IMX6UL_CLK_PLL6_ENET]	= imx_clk_gate("pll6_enet",	"pll6_bypass", base + 0xe0, 13);
 	clks[IMX6UL_CLK_PLL7_USB_HOST]	= imx_clk_gate("pll7_usb_host",	"pll7_bypass", base + 0x20, 13);
@@ -196,8 +196,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 			base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
 
 	clks[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
-	clks[IMX6UL_CLK_ENET_PTP_REF] 	= imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
-	clks[IMX6UL_CLK_ENET_PTP] 	= imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
+	clks[IMX6UL_CLK_ENET_PTP_REF]	= imx_clk_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
+	clks[IMX6UL_CLK_ENET_PTP]	= imx_clk_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);
 
 	clks[IMX6UL_CLK_PLL4_POST_DIV]  = clk_register_divider_table(NULL, "pll4_post_div", "pll4_audio",
 		 CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, base + 0x70, 19, 2, 0, post_div_table, &imx_ccm_lock);
@@ -210,8 +210,8 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 
 	/*						   name		parent_name	 mult  div */
 	clks[IMX6UL_CLK_PLL2_198M] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1,	2);
-	clks[IMX6UL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1, 	6);
-	clks[IMX6UL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1, 	8);
+	clks[IMX6UL_CLK_PLL3_80M]  = imx_clk_fixed_factor("pll3_80m",  "pll3_usb_otg",   1,	6);
+	clks[IMX6UL_CLK_PLL3_60M]  = imx_clk_fixed_factor("pll3_60m",  "pll3_usb_otg",   1,	8);
 	clks[IMX6UL_CLK_GPT_3M]	   = imx_clk_fixed_factor("gpt_3m",	"osc",		 1,	8);
 
 	np = ccm_node;
@@ -219,34 +219,34 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	WARN_ON(!base);
 
 	clks[IMX6UL_CA7_SECONDARY_SEL]	  = imx_clk_mux("ca7_secondary_sel", base + 0xc, 3, 1, ca7_secondary_sels, ARRAY_SIZE(ca7_secondary_sels));
-	clks[IMX6UL_CLK_STEP] 	 	  = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
-	clks[IMX6UL_CLK_PLL1_SW] 	  = imx_clk_mux_flags("pll1_sw",   base + 0x0c, 2,  1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
+	clks[IMX6UL_CLK_STEP]		  = imx_clk_mux("step", base + 0x0c, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+	clks[IMX6UL_CLK_PLL1_SW]	  = imx_clk_mux_flags("pll1_sw",   base + 0x0c, 2,  1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels), 0);
 	clks[IMX6UL_CLK_AXI_ALT_SEL]	  = imx_clk_mux("axi_alt_sel",		base + 0x14, 7,  1, axi_alt_sels, ARRAY_SIZE(axi_alt_sels));
-	clks[IMX6UL_CLK_AXI_SEL] 	  = imx_clk_mux_flags("axi_sel", 	base + 0x14, 6,  1, axi_sels, ARRAY_SIZE(axi_sels), 0);
-	clks[IMX6UL_CLK_PERIPH_PRE] 	  = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
-	clks[IMX6UL_CLK_PERIPH2_PRE] 	  = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
+	clks[IMX6UL_CLK_AXI_SEL]	  = imx_clk_mux_flags("axi_sel",	base + 0x14, 6,  1, axi_sels, ARRAY_SIZE(axi_sels), 0);
+	clks[IMX6UL_CLK_PERIPH_PRE]	  = imx_clk_mux("periph_pre",       base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+	clks[IMX6UL_CLK_PERIPH2_PRE]	  = imx_clk_mux("periph2_pre",      base + 0x18, 21, 2, periph2_pre_sels, ARRAY_SIZE(periph2_pre_sels));
 	clks[IMX6UL_CLK_PERIPH_CLK2_SEL]  = imx_clk_mux("periph_clk2_sel",  base + 0x18, 12, 2, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
 	clks[IMX6UL_CLK_PERIPH2_CLK2_SEL] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph2_clk2_sels, ARRAY_SIZE(periph2_clk2_sels));
-	clks[IMX6UL_CLK_EIM_SLOW_SEL] 	  = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
+	clks[IMX6UL_CLK_EIM_SLOW_SEL]	  = imx_clk_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels));
 	clks[IMX6UL_CLK_GPMI_SEL]	  = imx_clk_mux("gpmi_sel",     base + 0x1c, 19, 1, gpmi_sels, ARRAY_SIZE(gpmi_sels));
-	clks[IMX6UL_CLK_BCH_SEL]      	  = imx_clk_mux("bch_sel", 	base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
+	clks[IMX6UL_CLK_BCH_SEL]	  = imx_clk_mux("bch_sel",	base + 0x1c, 18, 1, bch_sels, ARRAY_SIZE(bch_sels));
 	clks[IMX6UL_CLK_USDHC2_SEL]	  = imx_clk_mux("usdhc2_sel",   base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
 	clks[IMX6UL_CLK_USDHC1_SEL]	  = imx_clk_mux("usdhc1_sel",   base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
-	clks[IMX6UL_CLK_SAI3_SEL]     	  = imx_clk_mux("sai3_sel",     base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
+	clks[IMX6UL_CLK_SAI3_SEL]	  = imx_clk_mux("sai3_sel",     base + 0x1c, 14, 2, sai_sels, ARRAY_SIZE(sai_sels));
 	clks[IMX6UL_CLK_SAI2_SEL]         = imx_clk_mux("sai2_sel",     base + 0x1c, 12, 2, sai_sels, ARRAY_SIZE(sai_sels));
-	clks[IMX6UL_CLK_SAI1_SEL]    	  = imx_clk_mux("sai1_sel",     base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
-	clks[IMX6UL_CLK_QSPI1_SEL] 	  = imx_clk_mux("qspi1_sel",    base + 0x1c, 7,  3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
-	clks[IMX6UL_CLK_PERCLK_SEL] 	  = imx_clk_mux("perclk_sel",	base + 0x1c, 6,  1, perclk_sels, ARRAY_SIZE(perclk_sels));
-	clks[IMX6UL_CLK_CAN_SEL]      	  = imx_clk_mux("can_sel",	base + 0x20, 8,  2, can_sels, ARRAY_SIZE(can_sels));
+	clks[IMX6UL_CLK_SAI1_SEL]	  = imx_clk_mux("sai1_sel",     base + 0x1c, 10, 2, sai_sels, ARRAY_SIZE(sai_sels));
+	clks[IMX6UL_CLK_QSPI1_SEL]	  = imx_clk_mux("qspi1_sel",    base + 0x1c, 7,  3, qspi1_sels, ARRAY_SIZE(qspi1_sels));
+	clks[IMX6UL_CLK_PERCLK_SEL]	  = imx_clk_mux("perclk_sel",	base + 0x1c, 6,  1, perclk_sels, ARRAY_SIZE(perclk_sels));
+	clks[IMX6UL_CLK_CAN_SEL]	  = imx_clk_mux("can_sel",	base + 0x20, 8,  2, can_sels, ARRAY_SIZE(can_sels));
 	clks[IMX6UL_CLK_UART_SEL]	  = imx_clk_mux("uart_sel",	base + 0x24, 6,  1, uart_sels, ARRAY_SIZE(uart_sels));
 	clks[IMX6UL_CLK_ENFC_SEL]	  = imx_clk_mux("enfc_sel",	base + 0x2c, 15, 3, enfc_sels, ARRAY_SIZE(enfc_sels));
 	clks[IMX6UL_CLK_LDB_DI0_SEL]	  = imx_clk_mux("ldb_di0_sel",	base + 0x2c, 9,  3, ldb_di0_sels, ARRAY_SIZE(ldb_di0_sels));
 	clks[IMX6UL_CLK_SPDIF_SEL]	  = imx_clk_mux("spdif_sel",	base + 0x30, 20, 2, spdif_sels, ARRAY_SIZE(spdif_sels));
-	clks[IMX6UL_CLK_SIM_PRE_SEL] 	  = imx_clk_mux("sim_pre_sel",	base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
-	clks[IMX6UL_CLK_SIM_SEL]	  = imx_clk_mux("sim_sel", 	base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
+	clks[IMX6UL_CLK_SIM_PRE_SEL]	  = imx_clk_mux("sim_pre_sel",	base + 0x34, 15, 3, sim_pre_sels, ARRAY_SIZE(sim_pre_sels));
+	clks[IMX6UL_CLK_SIM_SEL]	  = imx_clk_mux("sim_sel",	base + 0x34, 9, 3, sim_sels, ARRAY_SIZE(sim_sels));
 	clks[IMX6UL_CLK_ECSPI_SEL]	  = imx_clk_mux("ecspi_sel",	base + 0x38, 18, 1, ecspi_sels, ARRAY_SIZE(ecspi_sels));
 	clks[IMX6UL_CLK_LCDIF_PRE_SEL]	  = imx_clk_mux("lcdif_pre_sel", base + 0x38, 15, 3, lcdif_pre_sels, ARRAY_SIZE(lcdif_pre_sels));
-	clks[IMX6UL_CLK_LCDIF_SEL]	  = imx_clk_mux("lcdif_sel", 	base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
+	clks[IMX6UL_CLK_LCDIF_SEL]	  = imx_clk_mux("lcdif_sel",	base + 0x38, 9, 3, lcdif_sels, ARRAY_SIZE(lcdif_sels));
 
 	clks[IMX6UL_CLK_LDB_DI0_DIV_SEL]  = imx_clk_mux("ldb_di0", base + 0x20, 10, 1, ldb_di0_div_sels, ARRAY_SIZE(ldb_di0_div_sels));
 	clks[IMX6UL_CLK_LDB_DI1_DIV_SEL]  = imx_clk_mux("ldb_di1", base + 0x20, 11, 1, ldb_di1_div_sels, ARRAY_SIZE(ldb_di1_div_sels));
@@ -259,11 +259,11 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_PERIPH]  = imx_clk_busy_mux("periph",  base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
 	clks[IMX6UL_CLK_PERIPH2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
 
-	clks[IMX6UL_CLK_PERIPH_CLK2]	= imx_clk_divider("periph_clk2",   "periph_clk2_sel",  	base + 0x14, 27, 3);
-	clks[IMX6UL_CLK_PERIPH2_CLK2]	= imx_clk_divider("periph2_clk2",  "periph2_clk2_sel", 	base + 0x14, 0,  3);
+	clks[IMX6UL_CLK_PERIPH_CLK2]	= imx_clk_divider("periph_clk2",   "periph_clk2_sel",	base + 0x14, 27, 3);
+	clks[IMX6UL_CLK_PERIPH2_CLK2]	= imx_clk_divider("periph2_clk2",  "periph2_clk2_sel",	base + 0x14, 0,  3);
 	clks[IMX6UL_CLK_IPG]		= imx_clk_divider("ipg",	   "ahb",		base + 0x14, 8,	 2);
 	clks[IMX6UL_CLK_LCDIF_PODF]	= imx_clk_divider("lcdif_podf",	   "lcdif_pred",	base + 0x18, 23, 3);
-	clks[IMX6UL_CLK_QSPI1_PDOF] 	= imx_clk_divider("qspi1_podf",	   "qspi1_sel",		base + 0x1c, 26, 3);
+	clks[IMX6UL_CLK_QSPI1_PDOF]	= imx_clk_divider("qspi1_podf",	   "qspi1_sel",		base + 0x1c, 26, 3);
 	clks[IMX6UL_CLK_EIM_SLOW_PODF]	= imx_clk_divider("eim_slow_podf", "eim_slow_sel",	base + 0x1c, 23, 3);
 	clks[IMX6UL_CLK_PERCLK]		= imx_clk_divider("perclk",	   "perclk_sel",	base + 0x1c, 0,  6);
 	clks[IMX6UL_CLK_CAN_PODF]	= imx_clk_divider("can_podf",	   "can_sel",		base + 0x20, 2,  6);
@@ -287,14 +287,14 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_LCDIF_PRED]	= imx_clk_divider("lcdif_pred",	   "lcdif_pre_sel",	base + 0x38, 12, 3);
 	clks[IMX6UL_CLK_CSI_PODF]       = imx_clk_divider("csi_podf",      "csi_sel",           base + 0x3c, 11, 3);
 
-	clks[IMX6UL_CLK_ARM]		= imx_clk_busy_divider("arm", 	    "pll1_sw",	base +	0x10, 0,  3,  base + 0x48, 16);
+	clks[IMX6UL_CLK_ARM]		= imx_clk_busy_divider("arm",	    "pll1_sw",	base +	0x10, 0,  3,  base + 0x48, 16);
 	clks[IMX6UL_CLK_MMDC_PODF]	= imx_clk_busy_divider("mmdc_podf", "periph2",	base +  0x14, 3,  3,  base + 0x48, 2);
 	clks[IMX6UL_CLK_AXI_PODF]	= imx_clk_busy_divider("axi_podf",  "axi_sel",	base +  0x14, 16, 3,  base + 0x48, 0);
 	clks[IMX6UL_CLK_AHB]		= imx_clk_busy_divider("ahb",	    "periph",	base +  0x14, 10, 3,  base + 0x48, 1);
 
 	/* CCGR0 */
-	clks[IMX6UL_CLK_AIPSTZ1]	= imx_clk_gate2("aips_tz1", 	"ahb",		base + 0x68,	0);
-	clks[IMX6UL_CLK_AIPSTZ2]	= imx_clk_gate2("aips_tz2", 	"ahb",		base + 0x68,	2);
+	clks[IMX6UL_CLK_AIPSTZ1]	= imx_clk_gate2("aips_tz1",	"ahb",		base + 0x68,	0);
+	clks[IMX6UL_CLK_AIPSTZ2]	= imx_clk_gate2("aips_tz2",	"ahb",		base + 0x68,	2);
 	clks[IMX6UL_CLK_APBHDMA]	= imx_clk_gate2("apbh_dma",	"bch_podf",	base + 0x68,	4);
 	clks[IMX6UL_CLK_ASRC_IPG]	= imx_clk_gate2_shared("asrc_ipg",	"ahb",	base + 0x68,	6, &share_count_asrc);
 	clks[IMX6UL_CLK_ASRC_MEM]	= imx_clk_gate2_shared("asrc_mem",	"ahb",	base + 0x68,	6, &share_count_asrc);
@@ -302,7 +302,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_CAAM_ACLK]	= imx_clk_gate2("caam_aclk",	"ahb",		base + 0x68,	10);
 	clks[IMX6UL_CLK_CAAM_IPG]	= imx_clk_gate2("caam_ipg",	"ipg",		base + 0x68,	12);
 	clks[IMX6UL_CLK_CAN1_IPG]	= imx_clk_gate2("can1_ipg",	"ipg",		base + 0x68,	14);
-	clks[IMX6UL_CLK_CAN1_SERIAL]	= imx_clk_gate2("can1_serial",	"can_podf",	base + 0x68, 	16);
+	clks[IMX6UL_CLK_CAN1_SERIAL]	= imx_clk_gate2("can1_serial",	"can_podf",	base + 0x68,	16);
 	clks[IMX6UL_CLK_CAN2_IPG]	= imx_clk_gate2("can2_ipg",	"ipg",		base + 0x68,	18);
 	clks[IMX6UL_CLK_CAN2_SERIAL]	= imx_clk_gate2("can2_serial",	"can_podf",	base + 0x68,	20);
 	clks[IMX6UL_CLK_GPT2_BUS]	= imx_clk_gate2("gpt_bus",	"perclk",	base + 0x68,	24);
@@ -331,7 +331,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_CSI]		= imx_clk_gate2("csi",		"csi_podf",		base + 0x70,	2);
 	clks[IMX6UL_CLK_I2C1]		= imx_clk_gate2("i2c1",		"perclk",	base + 0x70,	6);
 	clks[IMX6UL_CLK_I2C2]		= imx_clk_gate2("i2c2",		"perclk",	base + 0x70,	8);
-	clks[IMX6UL_CLK_I2C3] 		= imx_clk_gate2("i2c3",		"perclk",	base + 0x70,	10);
+	clks[IMX6UL_CLK_I2C3]		= imx_clk_gate2("i2c3",		"perclk",	base + 0x70,	10);
 	clks[IMX6UL_CLK_OCOTP]		= imx_clk_gate2("ocotp",	"ipg",		base + 0x70,	12);
 	clks[IMX6UL_CLK_IOMUXC]		= imx_clk_gate2("iomuxc",	"lcdif_podf",	base + 0x70,	14);
 	clks[IMX6UL_CLK_LCDIF_APB]	= imx_clk_gate2("lcdif_apb",	"axi",		base + 0x70,	28);
@@ -391,7 +391,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	clks[IMX6UL_CLK_UART8_IPG]	= imx_clk_gate2("uart8_ipg",	"ipg",		 base + 0x80,	14);
 	clks[IMX6UL_CLK_UART8_SERIAL]	= imx_clk_gate2("uart8_serial", "uart_podf",	 base + 0x80,	14);
 	clks[IMX6UL_CLK_WDOG3]		= imx_clk_gate2("wdog3",	"ipg",		 base + 0x80,	20);
-	clks[IMX6UL_CLK_I2C4]		= imx_clk_gate2("i2c4",		"perclk", 	 base + 0x80,	24);
+	clks[IMX6UL_CLK_I2C4]		= imx_clk_gate2("i2c4",		"perclk",	 base + 0x80,	24);
 	clks[IMX6UL_CLK_PWM5]		= imx_clk_gate2("pwm5",		"perclk",	 base + 0x80,	26);
 	clks[IMX6UL_CLK_PWM6]		= imx_clk_gate2("pwm6",		"perclk",	 base +	0x80,	28);
 	clks[IMX6UL_CLK_PWM7]		= imx_clk_gate2("Pwm7",		"perclk",	 base + 0x80,	30);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index c343894..08ce4a7 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -21,13 +21,13 @@
 #define IMX6UL_PLL5_BYPASS_SRC		8
 #define IMX6UL_PLL6_BYPASS_SRC		9
 #define IMX6UL_PLL7_BYPASS_SRC		10
-#define IMX6UL_CLK_PLL1 		11
-#define IMX6UL_CLK_PLL2 		12
-#define IMX6UL_CLK_PLL3 		13
-#define IMX6UL_CLK_PLL4 		14
-#define IMX6UL_CLK_PLL5 		15
-#define IMX6UL_CLK_PLL6 		16
-#define IMX6UL_CLK_PLL7 		17
+#define IMX6UL_CLK_PLL1			11
+#define IMX6UL_CLK_PLL2			12
+#define IMX6UL_CLK_PLL3			13
+#define IMX6UL_CLK_PLL4			14
+#define IMX6UL_CLK_PLL5			15
+#define IMX6UL_CLK_PLL6			16
+#define IMX6UL_CLK_PLL7			17
 #define IMX6UL_PLL1_BYPASS		18
 #define IMX6UL_PLL2_BYPASS		19
 #define IMX6UL_PLL3_BYPASS		20
@@ -37,7 +37,7 @@
 #define IMX6UL_PLL7_BYPASS		24
 #define IMX6UL_CLK_PLL1_SYS		25
 #define IMX6UL_CLK_PLL2_BUS		26
-#define IMX6UL_CLK_PLL3_USB_OTG 	27
+#define IMX6UL_CLK_PLL3_USB_OTG		27
 #define IMX6UL_CLK_PLL4_AUDIO		28
 #define IMX6UL_CLK_PLL5_VIDEO		29
 #define IMX6UL_CLK_PLL6_ENET		30
@@ -66,7 +66,7 @@
 #define IMX6UL_CLK_PLL2_198M		53
 #define IMX6UL_CLK_PLL3_80M		54
 #define IMX6UL_CLK_PLL3_60M		55
-#define IMX6UL_CLK_STEP 		56
+#define IMX6UL_CLK_STEP			56
 #define IMX6UL_CLK_PLL1_SW		57
 #define IMX6UL_CLK_AXI_ALT_SEL		58
 #define IMX6UL_CLK_AXI_SEL		59
@@ -78,7 +78,7 @@
 #define IMX6UL_CLK_USDHC2_SEL		65
 #define IMX6UL_CLK_BCH_SEL		66
 #define IMX6UL_CLK_GPMI_SEL		67
-#define IMX6UL_CLK_EIM_SLOW_SEL 	68
+#define IMX6UL_CLK_EIM_SLOW_SEL		68
 #define IMX6UL_CLK_SPDIF_SEL		69
 #define IMX6UL_CLK_SAI1_SEL		70
 #define IMX6UL_CLK_SAI2_SEL		71
@@ -105,9 +105,9 @@
 #define IMX6UL_CLK_LDB_DI1_DIV_SEL	92
 #define IMX6UL_CLK_ARM			93
 #define IMX6UL_CLK_PERIPH_CLK2		94
-#define IMX6UL_CLK_PERIPH2_CLK2 	95
+#define IMX6UL_CLK_PERIPH2_CLK2		95
 #define IMX6UL_CLK_AHB			96
-#define IMX6UL_CLK_MMDC_PODF 		97
+#define IMX6UL_CLK_MMDC_PODF		97
 #define IMX6UL_CLK_AXI_PODF		98
 #define IMX6UL_CLK_PERCLK		99
 #define IMX6UL_CLK_IPG			100
@@ -133,16 +133,16 @@
 #define IMX6UL_CLK_CAN_PODF		120
 #define IMX6UL_CLK_ECSPI_PODF		121
 #define IMX6UL_CLK_UART_PODF		122
-#define IMX6UL_CLK_ADC1 		123
-#define IMX6UL_CLK_ADC2 		124
+#define IMX6UL_CLK_ADC1			123
+#define IMX6UL_CLK_ADC2			124
 #define IMX6UL_CLK_AIPSTZ1		125
 #define IMX6UL_CLK_AIPSTZ2		126
 #define IMX6UL_CLK_AIPSTZ3		127
 #define IMX6UL_CLK_APBHDMA		128
 #define IMX6UL_CLK_ASRC_IPG		129
 #define IMX6UL_CLK_ASRC_MEM		130
-#define IMX6UL_CLK_GPMI_BCH_APB  	131
-#define IMX6UL_CLK_GPMI_BCH 		132
+#define IMX6UL_CLK_GPMI_BCH_APB		131
+#define IMX6UL_CLK_GPMI_BCH		132
 #define IMX6UL_CLK_GPMI_IO		133
 #define IMX6UL_CLK_GPMI_APB		134
 #define IMX6UL_CLK_CAAM_MEM		135
@@ -154,7 +154,7 @@
 #define IMX6UL_CLK_ECSPI3		141
 #define IMX6UL_CLK_ECSPI4		142
 #define IMX6UL_CLK_EIM			143
-#define IMX6UL_CLK_ENET  		144
+#define IMX6UL_CLK_ENET			144
 #define IMX6UL_CLK_ENET_AHB		145
 #define IMX6UL_CLK_EPIT1		146
 #define IMX6UL_CLK_EPIT2		147
@@ -166,63 +166,63 @@
 #define IMX6UL_CLK_GPT1_SERIAL		153
 #define IMX6UL_CLK_GPT2_BUS		154
 #define IMX6UL_CLK_GPT2_SERIAL		155
-#define IMX6UL_CLK_I2C1 		156
-#define IMX6UL_CLK_I2C2 		157
-#define IMX6UL_CLK_I2C3 		158
-#define IMX6UL_CLK_I2C4 		159
-#define IMX6UL_CLK_IOMUXC 		160
-#define IMX6UL_CLK_LCDIF_APB 		161
-#define IMX6UL_CLK_LCDIF_PIX 		162
-#define IMX6UL_CLK_MMDC_P0_FAST 	163
-#define IMX6UL_CLK_MMDC_P0_IPG  	164
-#define IMX6UL_CLK_OCOTP 		165
-#define IMX6UL_CLK_OCRAM 		166
-#define IMX6UL_CLK_PWM1 		167
-#define IMX6UL_CLK_PWM2 		168
-#define IMX6UL_CLK_PWM3 		169
-#define IMX6UL_CLK_PWM4 		170
-#define IMX6UL_CLK_PWM5 		171
-#define IMX6UL_CLK_PWM6 		172
-#define IMX6UL_CLK_PWM7 		173
-#define IMX6UL_CLK_PWM8 		174
-#define IMX6UL_CLK_PXP  		175
-#define IMX6UL_CLK_QSPI 		176
-#define IMX6UL_CLK_ROM  		177
-#define IMX6UL_CLK_SAI1 		178
-#define IMX6UL_CLK_SAI1_IPG 		179
-#define IMX6UL_CLK_SAI2 		180
-#define IMX6UL_CLK_SAI2_IPG 		181
-#define IMX6UL_CLK_SAI3 		182
-#define IMX6UL_CLK_SAI3_IPG 		183
-#define IMX6UL_CLK_SDMA 		184
-#define IMX6UL_CLK_SIM  		185
-#define IMX6UL_CLK_SIM_S 		186
-#define IMX6UL_CLK_SPBA 		187
-#define IMX6UL_CLK_SPDIF 		188
-#define IMX6UL_CLK_UART1_IPG 		189
-#define IMX6UL_CLK_UART1_SERIAL 	190
-#define IMX6UL_CLK_UART2_IPG 		191
-#define IMX6UL_CLK_UART2_SERIAL 	192
-#define IMX6UL_CLK_UART3_IPG 		193
-#define IMX6UL_CLK_UART3_SERIAL 	194
-#define IMX6UL_CLK_UART4_IPG 		195
-#define IMX6UL_CLK_UART4_SERIAL 	196
-#define IMX6UL_CLK_UART5_IPG 		197
-#define IMX6UL_CLK_UART5_SERIAL 	198
-#define IMX6UL_CLK_UART6_IPG 		199
-#define IMX6UL_CLK_UART6_SERIAL 	200
-#define IMX6UL_CLK_UART7_IPG 		201
-#define IMX6UL_CLK_UART7_SERIAL 	202
-#define IMX6UL_CLK_UART8_IPG 		203
-#define IMX6UL_CLK_UART8_SERIAL 	204
-#define IMX6UL_CLK_USBOH3 		205
-#define IMX6UL_CLK_USDHC1 		206
-#define IMX6UL_CLK_USDHC2 		207
-#define IMX6UL_CLK_WDOG1 		208
-#define IMX6UL_CLK_WDOG2 		209
-#define IMX6UL_CLK_WDOG3 		210
+#define IMX6UL_CLK_I2C1			156
+#define IMX6UL_CLK_I2C2			157
+#define IMX6UL_CLK_I2C3			158
+#define IMX6UL_CLK_I2C4			159
+#define IMX6UL_CLK_IOMUXC		160
+#define IMX6UL_CLK_LCDIF_APB		161
+#define IMX6UL_CLK_LCDIF_PIX		162
+#define IMX6UL_CLK_MMDC_P0_FAST		163
+#define IMX6UL_CLK_MMDC_P0_IPG		164
+#define IMX6UL_CLK_OCOTP		165
+#define IMX6UL_CLK_OCRAM		166
+#define IMX6UL_CLK_PWM1			167
+#define IMX6UL_CLK_PWM2			168
+#define IMX6UL_CLK_PWM3			169
+#define IMX6UL_CLK_PWM4			170
+#define IMX6UL_CLK_PWM5			171
+#define IMX6UL_CLK_PWM6			172
+#define IMX6UL_CLK_PWM7			173
+#define IMX6UL_CLK_PWM8			174
+#define IMX6UL_CLK_PXP			175
+#define IMX6UL_CLK_QSPI			176
+#define IMX6UL_CLK_ROM			177
+#define IMX6UL_CLK_SAI1			178
+#define IMX6UL_CLK_SAI1_IPG		179
+#define IMX6UL_CLK_SAI2			180
+#define IMX6UL_CLK_SAI2_IPG		181
+#define IMX6UL_CLK_SAI3			182
+#define IMX6UL_CLK_SAI3_IPG		183
+#define IMX6UL_CLK_SDMA			184
+#define IMX6UL_CLK_SIM			185
+#define IMX6UL_CLK_SIM_S		186
+#define IMX6UL_CLK_SPBA			187
+#define IMX6UL_CLK_SPDIF		188
+#define IMX6UL_CLK_UART1_IPG		189
+#define IMX6UL_CLK_UART1_SERIAL		190
+#define IMX6UL_CLK_UART2_IPG		191
+#define IMX6UL_CLK_UART2_SERIAL		192
+#define IMX6UL_CLK_UART3_IPG		193
+#define IMX6UL_CLK_UART3_SERIAL		194
+#define IMX6UL_CLK_UART4_IPG		195
+#define IMX6UL_CLK_UART4_SERIAL		196
+#define IMX6UL_CLK_UART5_IPG		197
+#define IMX6UL_CLK_UART5_SERIAL		198
+#define IMX6UL_CLK_UART6_IPG		199
+#define IMX6UL_CLK_UART6_SERIAL		200
+#define IMX6UL_CLK_UART7_IPG		201
+#define IMX6UL_CLK_UART7_SERIAL		202
+#define IMX6UL_CLK_UART8_IPG		203
+#define IMX6UL_CLK_UART8_SERIAL		204
+#define IMX6UL_CLK_USBOH3		205
+#define IMX6UL_CLK_USDHC1		206
+#define IMX6UL_CLK_USDHC2		207
+#define IMX6UL_CLK_WDOG1		208
+#define IMX6UL_CLK_WDOG2		209
+#define IMX6UL_CLK_WDOG3		210
 #define IMX6UL_CLK_LDB_DI0		211
-#define IMX6UL_CLK_AXI  		212
+#define IMX6UL_CLK_AXI			212
 #define IMX6UL_CLK_SPDIF_GCLK		213
 #define IMX6UL_CLK_GPT_3M		214
 #define IMX6UL_CLK_SIM2			215
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH 2/2] clk: imx: add kpp clock for i.MX6UL
  2016-01-12 17:29 ` [PATCH 1/2] clk: imx: whitespace cleanup; no functional change Lothar Waßmann
@ 2016-01-12 17:29   ` Lothar Waßmann
  0 siblings, 0 replies; 5+ messages in thread
From: Lothar Waßmann @ 2016-01-12 17:29 UTC (permalink / raw)
  To: Anson Huang, Arnd Bergmann, Bai Ping, Fabio Estevam, Frank Li,
	Fugang Duan, Ian Campbell, Jaroslav Kysela, Kumar Gala,
	Liam Girdwood, Mark Brown, Mark Rutland, Michael Turquette,
	Nicolin Chen, Pawel Moll, Rob Herring, Russell King, Sascha Hauer,
	Shawn Guo, Stephen Boyd, Takashi Iwai, Timur Tabi, Xiubo Li,
	alsa-devel, devicetree, linux-arm-kernel, linux-clk, linux-kernel,
	linuxppc-dev, Lothar Waßmann

Add the necessary clock to use the KPP interface on i.MX6UL.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 drivers/clk/imx/clk-imx6ul.c             | 1 +
 include/dt-bindings/clock/imx6ul-clock.h | 3 ++-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 3e31ec0..1ee28d3 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -365,6 +365,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
 	/* CCGR5 */
 	clks[IMX6UL_CLK_ROM]		= imx_clk_gate2("rom",		"ahb",		base + 0x7c,	0);
 	clks[IMX6UL_CLK_SDMA]		= imx_clk_gate2("sdma",		"ahb",		base + 0x7c,	6);
+	clks[IMX6UL_CLK_KPP]		= imx_clk_gate2("kpp",		"ipg",		base + 0x7c,	8);
 	clks[IMX6UL_CLK_WDOG2]		= imx_clk_gate2("wdog2",	"ipg",		base + 0x7c,	10);
 	clks[IMX6UL_CLK_SPBA]		= imx_clk_gate2("spba",		"ipg",		base + 0x7c,	12);
 	clks[IMX6UL_CLK_SPDIF]		= imx_clk_gate2_shared("spdif",		"spdif_podf",	base + 0x7c,	14, &share_count_audio);
diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index 08ce4a7..fd8aee8 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -234,7 +234,8 @@
 #define IMX6UL_CLK_CSI_SEL		221
 #define IMX6UL_CLK_CSI_PODF		222
 #define IMX6UL_CLK_PLL3_120M		223
+#define IMX6UL_CLK_KPP			224
 
-#define IMX6UL_CLK_END			224
+#define IMX6UL_CLK_END			225
 
 #endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
-- 
2.1.4

^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL
  2016-01-12 17:29 [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL Lothar Waßmann
  2016-01-12 17:29 ` [PATCH 1/2] clk: imx: whitespace cleanup; no functional change Lothar Waßmann
@ 2016-02-25 23:56 ` Stephen Boyd
  2016-02-28  2:51   ` Shawn Guo
  1 sibling, 1 reply; 5+ messages in thread
From: Stephen Boyd @ 2016-02-25 23:56 UTC (permalink / raw)
  To: Lothar Waßmann, Shawn Guo
  Cc: Anson Huang, Arnd Bergmann, Bai Ping, Fabio Estevam, Frank Li,
	Fugang Duan, Ian Campbell, Jaroslav Kysela, Kumar Gala,
	Liam Girdwood, Mark Brown, Mark Rutland, Michael Turquette,
	Nicolin Chen, Pawel Moll, Rob Herring, Russell King, Sascha Hauer,
	Takashi Iwai, Timur Tabi, Xiubo Li, alsa-devel, devicetree,
	linux-arm-kernel, linux-clk, linux-kernel, linuxppc-dev

On 01/12, Lothar Waßmann wrote:
> This patchset adds the clock which is necessary to operate the KPP
> unit on i.MX6UL.
> The first patch removes bogus whitespace before TABs in indentation.
> The second patch adds the clock definition.
> 

Both look fine. Shawn?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL
  2016-02-25 23:56 ` [PATCH 0/2] clk: imx6: " Stephen Boyd
@ 2016-02-28  2:51   ` Shawn Guo
  0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2016-02-28  2:51 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: Lothar Waßmann, Anson Huang, Arnd Bergmann, Bai Ping,
	Fabio Estevam, Frank Li, Fugang Duan, Ian Campbell,
	Jaroslav Kysela, Kumar Gala, Liam Girdwood, Mark Brown,
	Mark Rutland, Michael Turquette, Nicolin Chen, Pawel Moll,
	Rob Herring, Russell King, Sascha Hauer, Takashi Iwai, Timur Tabi,
	Xiubo Li, alsa-devel, devicetree, linux-arm-kernel, linux-clk,
	linux-kernel, linuxppc-dev

On Thu, Feb 25, 2016 at 03:56:55PM -0800, Stephen Boyd wrote:
> On 01/12, Lothar Waßmann wrote:
> > This patchset adds the clock which is necessary to operate the KPP
> > unit on i.MX6UL.
> > The first patch removes bogus whitespace before TABs in indentation.
> > The second patch adds the clock definition.
> > 
> 
> Both look fine. Shawn?

Oops, the patches were overlooked.  Applied now.  Thanks for reminding.

Shawn

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2016-02-28  2:51 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-12 17:29 [PATCH 0/2] clk: imx6: add kpp clock for i.MX6UL Lothar Waßmann
2016-01-12 17:29 ` [PATCH 1/2] clk: imx: whitespace cleanup; no functional change Lothar Waßmann
2016-01-12 17:29   ` [PATCH 2/2] clk: imx: add kpp clock for i.MX6UL Lothar Waßmann
2016-02-25 23:56 ` [PATCH 0/2] clk: imx6: " Stephen Boyd
2016-02-28  2:51   ` Shawn Guo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).