From: Gautham R Shenoy <ego@linux.vnet.ibm.com>
To: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>
Cc: mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org,
paulus@ozlabs.org, linux-kernel@vger.kernel.org,
mikey@neuling.org
Subject: Re: [PATCH v2 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header
Date: Wed, 18 May 2016 10:05:51 +0530 [thread overview]
Message-ID: <20160518043551.GA3939@in.ibm.com> (raw)
In-Reply-To: <1462263878-25237-2-git-send-email-shreyas@linux.vnet.ibm.com>
On Tue, May 03, 2016 at 01:54:30PM +0530, Shreyas B. Prabhu wrote:
> CHECK_HMI_INTERRUPT is used to check for HMI's in reset vector. Move
> the macro to a common location (exception-64s.h)
> This patch does not change any functionality.
>
I suppose this code movement is to facilitate the invocation of
CHECK_HMI_INTERRUPT in some later patch ? In this case you could
add this to the commit message.
Otherwise,
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> ---
> arch/powerpc/include/asm/exception-64s.h | 18 ++++++++++++++++++
> arch/powerpc/kernel/idle_power7.S | 20 +-------------------
> 2 files changed, 19 insertions(+), 19 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
> index 93ae809..6a625af 100644
> --- a/arch/powerpc/include/asm/exception-64s.h
> +++ b/arch/powerpc/include/asm/exception-64s.h
> @@ -545,4 +545,22 @@ END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
> #define FINISH_NAP
> #endif
>
> +#define CHECK_HMI_INTERRUPT \
> + mfspr r0,SPRN_SRR1; \
> +BEGIN_FTR_SECTION_NESTED(66); \
> + rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
> +FTR_SECTION_ELSE_NESTED(66); \
> + rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
> +ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
> + cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
> + bne 20f; \
> + /* Invoke opal call to handle hmi */ \
> + ld r2,PACATOC(r13); \
> + ld r1,PACAR1(r13); \
> + std r3,ORIG_GPR3(r1); /* Save original r3 */ \
> + li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \
> + bl opal_call_realmode; \
> + ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
> +20: nop;
> +
> #endif /* _ASM_POWERPC_EXCEPTION_H */
> diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S
> index 470ceeb..6b3404b 100644
> --- a/arch/powerpc/kernel/idle_power7.S
> +++ b/arch/powerpc/kernel/idle_power7.S
> @@ -19,6 +19,7 @@
> #include <asm/kvm_book3s_asm.h>
> #include <asm/opal.h>
> #include <asm/cpuidle.h>
> +#include <asm/exception-64s.h>
> #include <asm/book3s/64/mmu-hash.h>
>
> #undef DEBUG
> @@ -257,25 +258,6 @@ _GLOBAL(power7_winkle)
> b power7_powersave_common
> /* No return */
>
> -#define CHECK_HMI_INTERRUPT \
> - mfspr r0,SPRN_SRR1; \
> -BEGIN_FTR_SECTION_NESTED(66); \
> - rlwinm r0,r0,45-31,0xf; /* extract wake reason field (P8) */ \
> -FTR_SECTION_ELSE_NESTED(66); \
> - rlwinm r0,r0,45-31,0xe; /* P7 wake reason field is 3 bits */ \
> -ALT_FTR_SECTION_END_NESTED_IFSET(CPU_FTR_ARCH_207S, 66); \
> - cmpwi r0,0xa; /* Hypervisor maintenance ? */ \
> - bne 20f; \
> - /* Invoke opal call to handle hmi */ \
> - ld r2,PACATOC(r13); \
> - ld r1,PACAR1(r13); \
> - std r3,ORIG_GPR3(r1); /* Save original r3 */ \
> - li r0,OPAL_HANDLE_HMI; /* Pass opal token argument*/ \
> - bl opal_call_realmode; \
> - ld r3,ORIG_GPR3(r1); /* Restore original r3 */ \
> -20: nop;
> -
> -
> _GLOBAL(power7_wakeup_tb_loss)
> ld r2,PACATOC(r13);
> ld r1,PACAR1(r13)
> --
> 2.4.11
>
next prev parent reply other threads:[~2016-05-18 4:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-03 8:24 [PATCH v2 0/9] powerpc/powernv/cpuidle: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-05-03 8:24 ` [PATCH v2 1/9] powerpc/powernv: Move CHECK_HMI_INTERRUPT to exception-64s header Shreyas B. Prabhu
2016-05-18 4:35 ` Gautham R Shenoy [this message]
2016-05-18 7:21 ` Shreyas B Prabhu
2016-05-03 8:24 ` [PATCH v2 2/9] powerpc/kvm: make hypervisor state restore a function Shreyas B. Prabhu
2016-05-18 6:25 ` Gautham R Shenoy
2016-05-18 7:07 ` Shreyas B Prabhu
2016-05-19 14:24 ` Gautham R Shenoy
2016-05-20 1:45 ` Paul Mackerras
2016-05-03 8:24 ` [PATCH v2 3/9] powerpc/powernv: Move idle code usable by multiple hardware to common location Shreyas B. Prabhu
2016-05-18 6:29 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 4/9] powerpc/powernv: Make power7_powersave_common more generic Shreyas B. Prabhu
2016-05-18 6:37 ` Gautham R Shenoy
2016-05-18 6:51 ` Shreyas B Prabhu
2016-05-19 14:26 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 5/9] powerpc/powernv: Move idle related macros to cpuidle.h Shreyas B. Prabhu
2016-05-19 14:27 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 6/9] powerpc/powernv: set power_save func after the idle states are initialized Shreyas B. Prabhu
2016-05-18 6:45 ` Gautham R Shenoy
2016-05-03 8:24 ` [PATCH v2 7/9] powerpc/powernv: Add platform support for stop instruction Shreyas B. Prabhu
2016-05-18 17:57 ` Gautham R Shenoy
2016-05-20 5:25 ` Paul Mackerras
2016-05-20 6:16 ` Shreyas B Prabhu
2016-05-03 8:24 ` [PATCH v2 8/9] cpuidle/powernv: Add support for POWER ISA v3 idle states Shreyas B. Prabhu
2016-05-03 8:24 ` [PATCH v2 9/9] powerpc/powernv: Use deepest stop state when cpu is offlined Shreyas B. Prabhu
2016-05-18 18:07 ` Gautham R Shenoy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160518043551.GA3939@in.ibm.com \
--to=ego@linux.vnet.ibm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=paulus@ozlabs.org \
--cc=shreyas@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).