From: Jason Cooper <jason@lakedaemon.net>
To: Zhao Qiang <qiang.zhao@nxp.com>
Cc: oss@buserror.net, tglx@linutronix.de, marc.zyngier@arm.com,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
xiaobo.xie@nxp.com
Subject: Re: [PATCH 1/2] qe/ic: move qe_ic_init from platforms to irqchip
Date: Tue, 5 Jul 2016 03:18:36 +0000 [thread overview]
Message-ID: <20160705031836.GA3348@io.lakedaemon.net> (raw)
In-Reply-To: <1467683219-29326-1-git-send-email-qiang.zhao@nxp.com>
Hi Zhao Qiang,
Please reword your subject line to conform to the standard in irqchip
(since that's where the code is added). Also, please adjust the subject
line to express *why* the change is being made.
On Tue, Jul 05, 2016 at 09:46:58AM +0800, Zhao Qiang wrote:
> The codes of qe_ic_init in platforms are redundant,
> move them to qe_ic under irqchip
This needs to be a lot more clear. How is backwards compatibility
preserved? Why is lookup by type "qeic" dropped? In short, please
explain everything that looks funny so we don't have to guess.
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
> arch/powerpc/platforms/83xx/misc.c | 15 ---------------
> arch/powerpc/platforms/85xx/corenet_generic.c | 9 ---------
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 14 --------------
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 16 ----------------
> arch/powerpc/platforms/85xx/twr_p102x.c | 14 --------------
> drivers/irqchip/qe_ic.c | 14 ++++++++++++++
> 6 files changed, 14 insertions(+), 68 deletions(-)
>
> diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
> index 7e923ca..9431fc7 100644
> --- a/arch/powerpc/platforms/83xx/misc.c
> +++ b/arch/powerpc/platforms/83xx/misc.c
> @@ -93,24 +93,9 @@ void __init mpc83xx_ipic_init_IRQ(void)
> }
>
> #ifdef CONFIG_QUICC_ENGINE
> -void __init mpc83xx_qe_init_IRQ(void)
> -{
> - struct device_node *np;
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (!np) {
> - np = of_find_node_by_type(NULL, "qeic");
> - if (!np)
> - return;
> - }
This block isn't preserved in the irqchip driver. Why not?
> - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
> - of_node_put(np);
> -}
> -
> void __init mpc83xx_ipic_and_qe_init_IRQ(void)
> {
> mpc83xx_ipic_init_IRQ();
> - mpc83xx_qe_init_IRQ();
> }
> #endif /* CONFIG_QUICC_ENGINE */
>
> diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
> index a2b0bc8..526fc2b 100644
> --- a/arch/powerpc/platforms/85xx/corenet_generic.c
> +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
> @@ -41,8 +41,6 @@ void __init corenet_gen_pic_init(void)
> unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
> MPIC_NO_RESET;
>
> - struct device_node *np;
> -
> if (ppc_md.get_irq == mpic_get_coreint_irq)
> flags |= MPIC_ENABLE_COREINT;
>
> @@ -50,13 +48,6 @@ void __init corenet_gen_pic_init(void)
> BUG_ON(mpic == NULL);
>
> mpic_init(mpic);
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> - }
> }
>
> /*
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> index f61cbe2..7ae4901 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> @@ -279,20 +279,6 @@ static void __init mpc85xx_mds_qeic_init(void)
> of_node_put(np);
> return;
> }
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (!np) {
> - np = of_find_node_by_type(NULL, "qeic");
> - if (!np)
> - return;
> - }
> -
> - if (machine_is(p1021_mds))
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - else
> - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
This block is also not preserved. Nor explained in the commit log. Is
it really ok to drop it? If so, why?
> - of_node_put(np);
> }
> #else
> static void __init mpc85xx_mds_qe_init(void) { }
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> index 3f4dad1..779f54f 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> @@ -49,10 +49,6 @@ void __init mpc85xx_rdb_pic_init(void)
> struct mpic *mpic;
> unsigned long root = of_get_flat_dt_root();
>
> -#ifdef CONFIG_QUICC_ENGINE
> - struct device_node *np;
> -#endif
> -
> if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) {
> mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
> MPIC_BIG_ENDIAN |
> @@ -67,18 +63,6 @@ void __init mpc85xx_rdb_pic_init(void)
>
> BUG_ON(mpic == NULL);
> mpic_init(mpic);
> -
> -#ifdef CONFIG_QUICC_ENGINE
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> -
> - } else
> - pr_err("%s: Could not find qe-ic node\n", __func__);
> -#endif
> -
> }
>
> /*
> diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
> index 71bc255..603e244 100644
> --- a/arch/powerpc/platforms/85xx/twr_p102x.c
> +++ b/arch/powerpc/platforms/85xx/twr_p102x.c
> @@ -35,26 +35,12 @@ static void __init twr_p1025_pic_init(void)
> {
> struct mpic *mpic;
>
> -#ifdef CONFIG_QUICC_ENGINE
> - struct device_node *np;
> -#endif
> -
> mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
> MPIC_SINGLE_DEST_CPU,
> 0, 256, " OpenPIC ");
>
> BUG_ON(mpic == NULL);
> mpic_init(mpic);
> -
> -#ifdef CONFIG_QUICC_ENGINE
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> - } else
> - pr_err("Could not find qe-ic node\n");
> -#endif
> }
>
> /* ************************************************************************
> diff --git a/drivers/irqchip/qe_ic.c b/drivers/irqchip/qe_ic.c
> index ec2ca86..f7f9a81 100644
> --- a/drivers/irqchip/qe_ic.c
> +++ b/drivers/irqchip/qe_ic.c
> @@ -509,4 +509,18 @@ static int __init init_qe_ic_sysfs(void)
> return 0;
> }
>
> +static int __init qeic_of_init(void)
> +{
> + struct device_node *np;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> + if (np) {
> + qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> + qe_ic_cascade_high_mpic);
> + of_node_put(np);
> + }
> + return 0;
> +}
> +
> +subsys_initcall(qeic_of_init);
> subsys_initcall(init_qe_ic_sysfs);
Was this tested on systems with dtbs containing type "qeic" but missing
"fsl,qe-ic"? What about non-p1021_mds mpc85xx_mds boards?
thx,
Jason.
next prev parent reply other threads:[~2016-07-05 4:34 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-05 1:46 [PATCH 1/2] qe/ic: move qe_ic_init from platforms to irqchip Zhao Qiang
2016-07-05 1:46 ` [PATCH 2/2] qe/ic: refactor qe_ic to simplify Zhao Qiang
2016-07-05 3:51 ` Jason Cooper
2016-07-05 7:38 ` Qiang Zhao
2016-07-05 13:45 ` Jason Cooper
2016-07-05 3:18 ` Jason Cooper [this message]
2016-07-05 7:27 ` [PATCH 1/2] qe/ic: move qe_ic_init from platforms to irqchip Qiang Zhao
2016-07-05 14:21 ` Jason Cooper
2016-07-06 1:18 ` Qiang Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160705031836.GA3348@io.lakedaemon.net \
--to=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=marc.zyngier@arm.com \
--cc=oss@buserror.net \
--cc=qiang.zhao@nxp.com \
--cc=tglx@linutronix.de \
--cc=xiaobo.xie@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).