From: Cyril Bur <cyrilbur@gmail.com>
To: linuxppc-dev@lists.ozlabs.org, wei.guo.simon@gmail.com
Cc: mikey@neuling.org, anton@samba.org
Subject: [PATCH v3 02/21] powerpc: Always restore FPU/VEC/VSX if hardware transactional memory in use
Date: Wed, 17 Aug 2016 13:43:04 +1000 [thread overview]
Message-ID: <20160817034323.23053-3-cyrilbur@gmail.com> (raw)
In-Reply-To: <20160817034323.23053-1-cyrilbur@gmail.com>
Comment from arch/powerpc/kernel/process.c:967:
If userspace is inside a transaction (whether active or
suspended) and FP/VMX/VSX instructions have ever been enabled
inside that transaction, then we have to keep them enabled
and keep the FP/VMX/VSX state loaded while ever the transaction
continues. The reason is that if we didn't, and subsequently
got a FP/VMX/VSX unavailable interrupt inside a transaction,
we don't know whether it's the same transaction, and thus we
don't know which of the checkpointed state and the ransactional
state to use.
restore_math() restore_fp() and restore_altivec() currently may not
restore the registers. It doesn't appear that this is more serious
than a performance penalty. If the math registers aren't restored the
userspace thread will still be run with the facility disabled.
Userspace will not be able to read invalid values. On the first access
it will take an facility unavailable exception and the kernel will
detected an active transaction, at which point it will abort the
transaction. There is the possibility for a pathological case
preventing any progress by transactions, however, transactions
are never guaranteed to make progress.
Fixes: 70fe3d9 ("powerpc: Restore FPU/VEC/VSX if previously used")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
---
arch/powerpc/kernel/process.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 58ccf86..cdf2d20 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -88,7 +88,13 @@ static void check_if_tm_restore_required(struct task_struct *tsk)
set_thread_flag(TIF_RESTORE_TM);
}
}
+
+static inline bool msr_tm_active(unsigned long msr)
+{
+ return MSR_TM_ACTIVE(msr);
+}
#else
+static inline bool msr_tm_active(unsigned long msr) { return false; }
static inline void check_if_tm_restore_required(struct task_struct *tsk) { }
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
@@ -208,7 +214,7 @@ void enable_kernel_fp(void)
EXPORT_SYMBOL(enable_kernel_fp);
static int restore_fp(struct task_struct *tsk) {
- if (tsk->thread.load_fp) {
+ if (tsk->thread.load_fp || msr_tm_active(tsk->thread.regs->msr)) {
load_fp_state(¤t->thread.fp_state);
current->thread.load_fp++;
return 1;
@@ -278,7 +284,8 @@ EXPORT_SYMBOL_GPL(flush_altivec_to_thread);
static int restore_altivec(struct task_struct *tsk)
{
- if (cpu_has_feature(CPU_FTR_ALTIVEC) && tsk->thread.load_vec) {
+ if (cpu_has_feature(CPU_FTR_ALTIVEC) &&
+ (tsk->thread.load_vec || msr_tm_active(tsk->thread.regs->msr))) {
load_vr_state(&tsk->thread.vr_state);
tsk->thread.used_vr = 1;
tsk->thread.load_vec++;
@@ -464,7 +471,8 @@ void restore_math(struct pt_regs *regs)
{
unsigned long msr;
- if (!current->thread.load_fp && !loadvec(current->thread))
+ if (!msr_tm_active(regs->msr) &&
+ !current->thread.load_fp && !loadvec(current->thread))
return;
msr = regs->msr;
@@ -983,6 +991,13 @@ void restore_tm_state(struct pt_regs *regs)
msr_diff = current->thread.ckpt_regs.msr & ~regs->msr;
msr_diff &= MSR_FP | MSR_VEC | MSR_VSX;
+ /* Ensure that restore_math() will restore */
+ if (msr_diff & MSR_FP)
+ current->thread.load_fp = 1;
+#ifdef CONFIG_ALIVEC
+ if (cpu_has_feature(CPU_FTR_ALTIVEC) && msr_diff & MSR_VEC)
+ current->thread.load_vec = 1;
+#endif
restore_math(regs);
regs->msr |= msr_diff;
--
2.9.3
next prev parent reply other threads:[~2016-08-17 3:44 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-17 3:43 [PATCH v3 00/21] Consistent TM structures Cyril Bur
2016-08-17 3:43 ` [PATCH v3 01/21] selftests/powerpc: Compile selftests against headers without AT_HWCAP2 Cyril Bur
2016-08-17 3:43 ` Cyril Bur [this message]
2016-08-19 6:33 ` [PATCH v3 02/21] powerpc: Always restore FPU/VEC/VSX if hardware transactional memory in use Michael Neuling
2016-08-23 0:57 ` Cyril Bur
2016-08-17 3:43 ` [PATCH v3 03/21] powerpc: Add check_if_tm_restore_required() to giveup_all() Cyril Bur
2016-08-19 6:40 ` Michael Neuling
2016-08-17 3:43 ` [PATCH v3 04/21] powerpc: Return the new MSR from msr_check_and_set() Cyril Bur
2016-08-17 3:53 ` Cyril Bur
2016-08-19 6:47 ` Michael Neuling
2016-08-17 3:43 ` [PATCH v3 05/21] powerpc: Never giveup a reclaimed thread when enabling kernel {fp, altivec, vsx} Cyril Bur
2016-08-17 3:43 ` [PATCH v3 06/21] powerpc: signals: Stop using current in signal code Cyril Bur
2016-08-17 4:31 ` kbuild test robot
2016-08-17 3:43 ` [PATCH v3 07/21] selftests/powerpc: Check for VSX preservation across userspace preemption Cyril Bur
2016-08-17 3:43 ` [PATCH v3 08/21] selftests/powerpc: Rework FPU stack placement macros and move to header file Cyril Bur
2016-08-17 3:43 ` [PATCH v3 09/21] selftests/powerpc: Move VMX stack frame macros " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 10/21] selftests/powerpc: Introduce GPR asm helper " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 11/21] selftests/powerpc: Add transactional memory defines Cyril Bur
2016-08-17 3:43 ` [PATCH v3 12/21] selftests/powerpc: Allow tests to extend their kill timeout Cyril Bur
2016-08-17 3:43 ` [PATCH v3 13/21] selftests/powerpc: Add TM tcheck helpers in C Cyril Bur
2016-08-17 3:43 ` [PATCH v3 14/21] selftests/powerpc: Check that signals always get delivered Cyril Bur
2016-08-17 3:43 ` [PATCH v3 15/21] selftests/powerpc: Add checks for transactional GPRs in signal contexts Cyril Bur
2016-08-17 3:43 ` [PATCH v3 16/21] selftests/powerpc: Add checks for transactional FPUs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 17/21] selftests/powerpc: Add checks for transactional VMXs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 18/21] selftests/powerpc: Add checks for transactional VSXs " Cyril Bur
2016-08-17 3:43 ` [PATCH v3 19/21] powerpc: tm: Always use fp_state and vr_state to store live registers Cyril Bur
2016-08-19 4:04 ` Simon Guo
2016-08-17 3:43 ` [PATCH v3 20/21] powerpc: tm: Rename transct_(*) to ck(\1)_state Cyril Bur
2016-08-17 3:43 ` [PATCH v3 21/21] powerpc: Remove do_load_up_transact_{fpu,altivec} Cyril Bur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160817034323.23053-3-cyrilbur@gmail.com \
--to=cyrilbur@gmail.com \
--cc=anton@samba.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=wei.guo.simon@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).