linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Balbir Singh <bsingharora@gmail.com>,
	"Shreyas B . Prabhu" <shreyas@linux.vnet.ibm.com>,
	"Gautham R . Shenoy" <ego@linux.vnet.ibm.com>
Subject: [PATCH] powerpc/64s: relocation, register save fixes for system reset interrupt
Date: Thu, 13 Oct 2016 13:17:14 +1100	[thread overview]
Message-ID: <20161013021714.6624-1-npiggin@gmail.com> (raw)

This patch does a couple of things. First of all, powernv immediately
explodes when running a relocated kernel, because the system reset
exception for handling sleeps does not do correct relocated branches.

Secondly, the sleep handling code trashes the condition and cfar
registers, which we would like to preserve for debugging purposes (for
non-sleep case exception).

This patch changes the exception to use the standard format that saves
registers before any tests or branches are made. It adds the test for
idle-wakeup as an "extra" to break out of the normal exception path.
Then it branches to a relocated idle handler that calls the various
idle handling functions.

After this patch, POWER8 CPU simulator now boots powernv kernel that is
running at non-zero.

Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/exception-64s.h | 16 ++++++++++
 arch/powerpc/kernel/exceptions-64s.S     | 50 ++++++++++++++++++--------------
 2 files changed, 45 insertions(+), 21 deletions(-)

diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index 2e4e7d8..84d49b1 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -93,6 +93,10 @@
 	ld	reg,PACAKBASE(r13);	/* get high part of &label */	\
 	ori	reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
 
+#define __LOAD_HANDLER(reg, label)					\
+	ld	reg,PACAKBASE(r13);					\
+	ori	reg,reg,(ABS_ADDR(label))@l;
+
 /* Exception register prefixes */
 #define EXC_HV	H
 #define EXC_STD
@@ -208,6 +212,18 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
 #define kvmppc_interrupt kvmppc_interrupt_pr
 #endif
 
+#ifdef CONFIG_RELOCATABLE
+#define BRANCH_TO_COMMON(reg, label)					\
+	__LOAD_HANDLER(reg, label);					\
+	mtctr	reg;							\
+	bctr
+
+#else
+#define BRANCH_TO_COMMON(reg, label)					\
+	b	label
+
+#endif
+
 #define __KVM_HANDLER_PROLOG(area, n)					\
 	BEGIN_FTR_SECTION_NESTED(947)					\
 	ld	r10,area+EX_CFAR(r13);					\
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 08992f8..e680e84 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -95,19 +95,35 @@ __start_interrupts:
 /* No virt vectors corresponding with 0x0..0x100 */
 EXC_VIRT_NONE(0x4000, 0x4100)
 
-EXC_REAL_BEGIN(system_reset, 0x100, 0x200)
-	SET_SCRATCH0(r13)
+
 #ifdef CONFIG_PPC_P7_NAP
-BEGIN_FTR_SECTION
-	/* Running native on arch 2.06 or later, check if we are
-	 * waking up from nap/sleep/winkle.
+	/*
+	 * If running native on arch 2.06 or later, check if we are waking up
+	 * from nap/sleep/winkle, and branch to idle handler.
 	 */
-	mfspr	r13,SPRN_SRR1
-	rlwinm.	r13,r13,47-31,30,31
-	beq	9f
+#define IDLETEST(n)							\
+	BEGIN_FTR_SECTION ;						\
+	mfspr	r10,SPRN_SRR1 ;						\
+	rlwinm.	r10,r10,47-31,30,31 ;					\
+	beq-	1f ;							\
+	cmpwi	cr3,r10,2 ;						\
+	BRANCH_TO_COMMON(r10, system_reset_idle_common) ;		\
+1:									\
+	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+#else
+#define IDLETEST NOTEST
+#endif
 
-	cmpwi	cr3,r13,2
-	GET_PACA(r13)
+EXC_REAL_BEGIN(system_reset, 0x100, 0x200)
+	SET_SCRATCH0(r13)
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
+				 IDLETEST, 0x100)
+
+EXC_REAL_END(system_reset, 0x100, 0x200)
+EXC_VIRT_NONE(0x4100, 0x4200)
+
+#ifdef CONFIG_PPC_P7_NAP
+EXC_COMMON_BEGIN(system_reset_idle_common)
 	bl	pnv_restore_hyp_resource
 
 	li	r0,PNV_THREAD_RUNNING
@@ -130,14 +146,8 @@ BEGIN_FTR_SECTION
 	blt	cr3,2f
 	b	pnv_wakeup_loss
 2:	b	pnv_wakeup_noloss
+#endif
 
-9:
-END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
-#endif /* CONFIG_PPC_P7_NAP */
-	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
-				 NOTEST, 0x100)
-EXC_REAL_END(system_reset, 0x100, 0x200)
-EXC_VIRT_NONE(0x4100, 0x4200)
 EXC_COMMON(system_reset_common, 0x100, system_reset_exception)
 
 #ifdef CONFIG_PPC_PSERIES
@@ -817,10 +827,8 @@ EXC_VIRT(trap_0b, 0x4b00, 0x4c00, 0xb00)
 TRAMP_KVM(PACA_EXGEN, 0xb00)
 EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
 
-
-#define LOAD_SYSCALL_HANDLER(reg)				\
-	ld	reg,PACAKBASE(r13);				\
-	ori	reg,reg,(ABS_ADDR(system_call_common))@l;
+#define LOAD_SYSCALL_HANDLER(reg)					\
+	__LOAD_HANDLER(reg, system_call_common)
 
 /* Syscall routine is used twice, in reloc-off and reloc-on paths */
 #define SYSCALL_PSERIES_1 					\
-- 
2.9.3

             reply	other threads:[~2016-10-13  2:17 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-13  2:17 Nicholas Piggin [this message]
2016-10-13 11:02 ` [PATCH] powerpc/64s: relocation, register save fixes for system reset interrupt Gautham R Shenoy
2016-10-13 11:54 ` Balbir Singh
2016-10-14  3:16   ` Nicholas Piggin
2016-10-14  5:45     ` Balbir Singh
2016-10-27 11:38 ` Michael Ellerman
2016-10-28 12:01   ` Balbir Singh
2016-11-02  6:04 ` [PATCH] " Mahesh Jagannath Salgaonkar
2016-11-02  6:57   ` Nicholas Piggin
2016-11-02  8:24     ` Mahesh J Salgaonkar
2016-11-02  8:36       ` Nicholas Piggin
2016-11-02  8:45         ` Gautham R Shenoy
2016-11-03  5:21           ` Nicholas Piggin
2016-11-03  5:56             ` Shreyas B. Prabhu
2016-11-03  6:17               ` Nicholas Piggin
2016-11-03  6:32                 ` Shreyas B. Prabhu
2016-11-03  7:02                   ` Nicholas Piggin
2016-11-04  9:04                     ` Gautham R Shenoy
2016-11-04 11:47                       ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161013021714.6624-1-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=bsingharora@gmail.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=shreyas@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).