From: Gautham R Shenoy <ego@linux.vnet.ibm.com>
To: "Oliver O'Halloran" <oohall@gmail.com>
Cc: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>,
Michael Ellerman <mpe@ellerman.id.au>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Paul Mackerras <paulus@samba.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Michael Neuling <mikey@neuling.org>,
Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>,
"Shreyas B. Prabhu" <shreyasbp@gmail.com>,
Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>,
Stewart Smith <stewart@linux.vnet.ibm.com>,
Balbir Singh <bsingharora@gmail.com>,
skiboot list <skiboot@lists.ozlabs.org>,
linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: Re: [PATCH v2 2/3] cpuidle:powernv: Add helper function to populate powernv idle states.
Date: Wed, 2 Nov 2016 14:12:21 +0530 [thread overview]
Message-ID: <20161102084221.GC17909@in.ibm.com> (raw)
In-Reply-To: <CAOSf1CHZ0_1B28bX9TsaE6vcOaWUwhanQWAN=LKSLoNHK+Jh0A@mail.gmail.com>
Hi Oliver,
Thanks for reviewing the patch!
On Tue, Nov 01, 2016 at 07:32:58PM +1100, Oliver O'Halloran wrote:
> On Thu, Oct 27, 2016 at 7:35 PM, Gautham R. Shenoy
> <ego@linux.vnet.ibm.com> wrote:
> > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
> >
> > In the current code for powernv_add_idle_states, there is a lot of code
> > duplication while initializing an idle state in powernv_states table.
> >
> > Add an inline helper function to populate the powernv_states[] table for
> > a given idle state. Invoke this for populating the "Nap", "Fastsleep"
> > and the stop states in powernv_add_idle_states.
> >
> > Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
> > ---
> > drivers/cpuidle/cpuidle-powernv.c | 82 +++++++++++++++++++++++----------------
> > include/linux/cpuidle.h | 1 +
> > 2 files changed, 49 insertions(+), 34 deletions(-)
> >
> > diff --git a/drivers/cpuidle/cpuidle-powernv.c b/drivers/cpuidle/cpuidle-powernv.c
> > index 7fe442c..11b22b9 100644
> > --- a/drivers/cpuidle/cpuidle-powernv.c
> > +++ b/drivers/cpuidle/cpuidle-powernv.c
> > @@ -167,6 +167,28 @@ static int powernv_cpuidle_driver_init(void)
> > return 0;
> > }
> >
> > +static inline void add_powernv_state(int index, const char *name,
> > + unsigned int flags,
> > + int (*idle_fn)(struct cpuidle_device *,
> > + struct cpuidle_driver *,
> > + int),
> > + unsigned int target_residency,
> > + unsigned int exit_latency,
> > + u64 psscr_val)
> > +{
> > + strncpy(powernv_states[index].name, name, CPUIDLE_NAME_LEN);
> > + strncpy(powernv_states[index].desc, name, CPUIDLE_NAME_LEN);
>
> If the supplied name is equal to CPUIDLE_NAME_LEN then strncpy() won't
> terminate the string. The least annoying fix is to memset() the whole
> structure to zero and set n to CPUIDLE_NAME_LEN - 1.
I will change this to use strlcpy as Paul suggested in the reply.
>
> > + powernv_states[index].flags = flags;
> > + powernv_states[index].target_residency = target_residency;
> > + powernv_states[index].exit_latency = exit_latency;
> > + powernv_states[index].enter = idle_fn;
> > +
> > + if (idle_fn != stop_loop)
> > + return;
>
> This can probably be deleted. The nap/sleep loops don't look at the
> psscr setting and you've passed in a dummy value of zero anyway.
The subsequent patch adds the missing bits to the psscr_val if we are
running on the older firmware. But in any case, as you rightly pointed
out we don't use psscr_table in nap/sleep loops. So this can go.
>
> > +
> > + stop_psscr_table[index] = psscr_val;
> > +}
> > +
> > static int powernv_add_idle_states(void)
> > {
> > struct device_node *power_mgt;
> > @@ -236,6 +258,7 @@ static int powernv_add_idle_states(void)
> > "ibm,cpu-idle-state-residency-ns", residency_ns, dt_idle_states);
> >
> > for (i = 0; i < dt_idle_states; i++) {
> > + unsigned int exit_latency, target_residency;
> > /*
> > * If an idle state has exit latency beyond
> > * POWERNV_THRESHOLD_LATENCY_NS then don't use it
> > @@ -244,27 +267,30 @@ static int powernv_add_idle_states(void)
> > if (latency_ns[i] > POWERNV_THRESHOLD_LATENCY_NS)
> > continue;
> >
> > + exit_latency = ((unsigned int)latency_ns[i]) / 1000;
> > + target_residency = (!rc) ? ((unsigned int)residency_ns[i]) : 0;
> > + /*
> > + * Firmware passes residency values in ns.
> > + * cpuidle expects it in us.
> > + */
> > + target_residency /= 1000;
> > +
> > /*
> > * Cpuidle accepts exit_latency and target_residency in us.
>
> This comment says the same thing as the one above.
Will clean this up to reflect the state of the code.
>
> > * Use default target_residency values if f/w does not expose it.
> > */
> > if (flags[i] & OPAL_PM_NAP_ENABLED) {
> > + target_residency = 100;
>
> Hmm, the above comment says that we should only use the default value
> for target_residency if firmware hasn't provided a value. Is there a
> reason we always use the hard coded value?
Ah, good catch! I should be setting target_residency to the default
value only if it is not set by the firmware. Will fix this.
>
> > /* Add NAP state */
> > - strcpy(powernv_states[nr_idle_states].name, "Nap");
> > - strcpy(powernv_states[nr_idle_states].desc, "Nap");
> > - powernv_states[nr_idle_states].flags = 0;
> > - powernv_states[nr_idle_states].target_residency = 100;
> > - powernv_states[nr_idle_states].enter = nap_loop;
> > + add_powernv_state(nr_idle_states, "Nap",
> > + CPUIDLE_FLAG_NONE, nap_loop,
> > + target_residency, exit_latency, 0);
> > } else if ((flags[i] & OPAL_PM_STOP_INST_FAST) &&
> > !(flags[i] & OPAL_PM_TIMEBASE_STOP)) {
> > - strncpy(powernv_states[nr_idle_states].name,
> > - names[i], CPUIDLE_NAME_LEN);
> > - strncpy(powernv_states[nr_idle_states].desc,
> > - names[i], CPUIDLE_NAME_LEN);
> > - powernv_states[nr_idle_states].flags = 0;
> > -
> > - powernv_states[nr_idle_states].enter = stop_loop;
> > - stop_psscr_table[nr_idle_states] = psscr_val[i];
> > + add_powernv_state(nr_idle_states, names[i],
> > + CPUIDLE_FLAG_NONE, stop_loop,
> > + target_residency, exit_latency,
> > + psscr_val[i]);
> > }
> >
> > /*
> > @@ -274,32 +300,20 @@ static int powernv_add_idle_states(void)
> > #ifdef CONFIG_TICK_ONESHOT
> > if (flags[i] & OPAL_PM_SLEEP_ENABLED ||
> > flags[i] & OPAL_PM_SLEEP_ENABLED_ER1) {
> > + target_residency = 300000;
>
> Same comment as above.
>
> > /* Add FASTSLEEP state */
> > - strcpy(powernv_states[nr_idle_states].name, "FastSleep");
> > - strcpy(powernv_states[nr_idle_states].desc, "FastSleep");
> > - powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIMER_STOP;
> > - powernv_states[nr_idle_states].target_residency = 300000;
> > - powernv_states[nr_idle_states].enter = fastsleep_loop;
> > + add_powernv_state(nr_idle_states, "FastSleep",
> > + CPUIDLE_FLAG_TIMER_STOP,
> > + fastsleep_loop,
> > + target_residency, exit_latency, 0);
> > } else if ((flags[i] & OPAL_PM_STOP_INST_DEEP) &&
> > (flags[i] & OPAL_PM_TIMEBASE_STOP)) {
> > - strncpy(powernv_states[nr_idle_states].name,
> > - names[i], CPUIDLE_NAME_LEN);
> > - strncpy(powernv_states[nr_idle_states].desc,
> > - names[i], CPUIDLE_NAME_LEN);
> > -
> > - powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIMER_STOP;
> > - powernv_states[nr_idle_states].enter = stop_loop;
> > - stop_psscr_table[nr_idle_states] = psscr_val[i];
> > + add_powernv_state(nr_idle_states, names[i],
> > + CPUIDLE_FLAG_TIMER_STOP, stop_loop,
> > + target_residency, exit_latency,
> > + psscr_val[i]);
> > }
> > #endif
> > - powernv_states[nr_idle_states].exit_latency =
> > - ((unsigned int)latency_ns[i]) / 1000;
> > -
> > - if (!rc) {
> > - powernv_states[nr_idle_states].target_residency =
> > - ((unsigned int)residency_ns[i]) / 1000;
> > - }
> > -
> > nr_idle_states++;
> > }
> > out:
> > diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
> > index bb31373..c4e10f8 100644
> > --- a/include/linux/cpuidle.h
> > +++ b/include/linux/cpuidle.h
> > @@ -62,6 +62,7 @@ struct cpuidle_state {
> > };
> >
> > /* Idle State Flags */
> > +#define CPUIDLE_FLAG_NONE (0x00)
> > #define CPUIDLE_FLAG_COUPLED (0x02) /* state applies to multiple cpus */
> > #define CPUIDLE_FLAG_TIMER_STOP (0x04) /* timer is stopped on this state */
> >
> > --
> > 1.9.4
> >
>
> Looks good otherwise.
>
> Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Thanks again!
>
--
Regards
gautham.
next prev parent reply other threads:[~2016-11-02 8:42 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-27 8:35 [PATCH v2 0/3] powernv:stop: Use psscr_val,mask provided by firmware Gautham R. Shenoy
2016-10-27 8:35 ` [PATCH v2 1/3] powernv:idle: Add IDLE_STATE_ENTER_SEQ_NORET macro Gautham R. Shenoy
2016-10-27 8:35 ` [PATCH v2 2/3] cpuidle:powernv: Add helper function to populate powernv idle states Gautham R. Shenoy
2016-11-01 8:32 ` Oliver O'Halloran
2016-11-01 21:03 ` Paul Mackerras
2016-11-02 8:42 ` Gautham R Shenoy [this message]
2016-10-27 8:35 ` [PATCH v2 3/3] powernv: Pass PSSCR value and mask to power9_idle_stop Gautham R. Shenoy
2016-11-01 4:21 ` [PATCH v2 0/3] powernv:stop: Use psscr_val, mask provided by firmware Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161102084221.GC17909@in.ibm.com \
--to=ego@linux.vnet.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=bsingharora@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=oohall@gmail.com \
--cc=paulus@samba.org \
--cc=rjw@rjwysocki.net \
--cc=shilpa.bhat@linux.vnet.ibm.com \
--cc=shreyasbp@gmail.com \
--cc=skiboot@lists.ozlabs.org \
--cc=stewart@linux.vnet.ibm.com \
--cc=svaidy@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).