linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
	Gautham R Shenoy <ego@linux.vnet.ibm.com>,
	Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Subject: [PATCH 4/8] powerpc/64s: fix POWER9 machine check handler from stop state
Date: Tue, 14 Mar 2017 19:23:45 +1000	[thread overview]
Message-ID: <20170314092349.10981-5-npiggin@gmail.com> (raw)
In-Reply-To: <20170314092349.10981-1-npiggin@gmail.com>

The ISA specifies power save wakeup can cause a machine check interrupt.
The machine check handler currently has code to handle that for POWER8,
but POWER9 crashes when trying to execute the P8 style sleep
instructions.

So queue up the machine check, then call into the idle code to wake up
as the system reset interrupt does, rather than attempting to sleep
again without going through the main idle path.

Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/reg.h       |  1 +
 arch/powerpc/kernel/exceptions-64s.S | 69 ++++++++++++++++++------------------
 2 files changed, 35 insertions(+), 35 deletions(-)

diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index fc879fd6bdae..8bbdfacce970 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -656,6 +656,7 @@
 #define   SRR1_ISI_PROT		0x08000000 /* ISI: Other protection fault */
 #define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
 #define   SRR1_WAKEMASK_P8	0x003c0000 /* reason for wakeup on POWER8 and 9 */
+#define   SRR1_WAKEMCE_RESVD	0x003c0000 /* Unused/reserved value used by MCE wakeup to indicate cause to idle wakeup handler */
 #define   SRR1_WAKESYSERR	0x00300000 /* System error */
 #define   SRR1_WAKEEE		0x00200000 /* External interrupt */
 #define   SRR1_WAKEHVI		0x00240000 /* Hypervisor Virtualization Interrupt (P9) */
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index e390fcd04bcb..5779d2d6a192 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -306,6 +306,33 @@ EXC_COMMON_BEGIN(machine_check_common)
 	/* restore original r1. */			\
 	ld	r1,GPR1(r1)
 
+#ifdef CONFIG_PPC_P7_NAP
+EXC_COMMON_BEGIN(machine_check_idle_common)
+	bl	machine_check_queue_event
+	/*
+	 * Queue the machine check, then reload SRR1 and use it to set
+	 * CR3 according to pnv_powersave_wakeup convention.
+	 */
+	ld	r12,_MSR(r1)
+	rlwinm	r11,r12,47-31,30,31
+	cmpwi	cr3,r11,2
+
+	/*
+	 * Now put SRR1_WAKEMCE_RESVD into SRR1, allows it to follow the
+	 * system reset wakeup code.
+	 */
+	oris	r12,r12,SRR1_WAKEMCE_RESVD@h
+	mtspr	SPRN_SRR1,r12
+	std	r12,_MSR(r1)
+
+	/*
+	 * Decrement MCE nesting after finishing with the stack.
+	 */
+	lhz	r11,PACA_IN_MCE(r13)
+	subi	r11,r11,1
+	sth	r11,PACA_IN_MCE(r13)
+	b	pnv_powersave_wakeup
+#endif
 	/*
 	 * Handle machine check early in real mode. We come here with
 	 * ME=1, MMU (IR=0 and DR=0) off and using MC emergency stack.
@@ -318,6 +345,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	bl	machine_check_early
 	std	r3,RESULT(r1)	/* Save result */
 	ld	r12,_MSR(r1)
+
 #ifdef	CONFIG_PPC_P7_NAP
 	/*
 	 * Check if thread was in power saving mode. We come here when any
@@ -328,43 +356,14 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
 	 *
 	 * Go back to nap/sleep/winkle mode again if (b) is true.
 	 */
-	rlwinm.	r11,r12,47-31,30,31	/* Was it in power saving mode? */
-	beq	4f			/* No, it wasn't */
-	/* Thread was in power saving mode. Go back to nap again. */
-	cmpwi	r11,2
-	blt	3f
-	/* Supervisor/Hypervisor state loss */
-	li	r0,1
-	stb	r0,PACA_NAPSTATELOST(r13)
-3:	bl	machine_check_queue_event
-	MACHINE_CHECK_HANDLER_WINDUP
-	GET_PACA(r13)
-	ld	r1,PACAR1(r13)
-	/*
-	 * Check what idle state this CPU was in and go back to same mode
-	 * again.
-	 */
-	lbz	r3,PACA_THREAD_IDLE_STATE(r13)
-	cmpwi	r3,PNV_THREAD_NAP
-	bgt	10f
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_NAP)
-	/* No return */
-10:
-	cmpwi	r3,PNV_THREAD_SLEEP
-	bgt	2f
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_SLEEP)
-	/* No return */
-
-2:
-	/*
-	 * Go back to winkle. Please note that this thread was woken up in
-	 * machine check from winkle and have not restored the per-subcore
-	 * state.
-	 */
-	IDLE_STATE_ENTER_SEQ_NORET(PPC_WINKLE)
-	/* No return */
+	BEGIN_FTR_SECTION
+	rlwinm.	r11,r12,47-31,30,31
+	beq-	4f
+	BRANCH_TO_COMMON(r10, machine_check_idle_common)
 4:
+	END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
 #endif
+
 	/*
 	 * Check if we are coming from hypervisor userspace. If yes then we
 	 * continue in host kernel in V mode to deliver the MC event.
-- 
2.11.0

  parent reply	other threads:[~2017-03-14  9:24 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-14  9:23 [PATCH 0/8] idle fixes and changes for POWER8 and POWER9 Nicholas Piggin
2017-03-14  9:23 ` [PATCH 1/8] powerpc/64s: move remaining system reset idle code into idle_book3s.S Nicholas Piggin
2017-03-14  9:23 ` [PATCH 2/8] powerpc/64s: stop using bit in HSPRG0 to test winkle Nicholas Piggin
2017-03-16 11:14   ` Gautham R Shenoy
2017-03-14  9:23 ` [PATCH 3/8] powerpc/64s: use alternative feature patching Nicholas Piggin
2017-03-16 11:21   ` Gautham R Shenoy
2017-03-14  9:23 ` Nicholas Piggin [this message]
2017-03-16 12:40   ` [PATCH 4/8] powerpc/64s: fix POWER9 machine check handler from stop state Mahesh Jagannath Salgaonkar
2017-03-16 13:05     ` Nicholas Piggin
2017-03-16 13:19       ` Gautham R Shenoy
2017-03-20  5:22         ` Mahesh Jagannath Salgaonkar
2017-03-17  2:49     ` Nicholas Piggin
2017-03-17  5:15       ` Nicholas Piggin
2017-03-14  9:23 ` [PATCH 5/8] powerpc/64s: use PACA_THREAD_IDLE_STATE only in POWER8 Nicholas Piggin
2017-03-16 11:54   ` Gautham R Shenoy
2017-03-16 12:16     ` Nicholas Piggin
2017-03-14  9:23 ` [PATCH 6/8] powerpc/64s: idle expand usable core idle state bits Nicholas Piggin
2017-03-16 12:10   ` Gautham R Shenoy
2017-03-14  9:23 ` [PATCH 7/8] powerpc/64s: idle do not hold reservation longer than required Nicholas Piggin
2017-03-16 12:43   ` Gautham R Shenoy
2017-03-16 12:55     ` Nicholas Piggin
2017-03-14  9:23 ` [PATCH 8/8] powerpc/64s: idle POWER8 avoid full state loss recovery when possible Nicholas Piggin
2017-03-16 16:12   ` Gautham R Shenoy
2017-03-17  5:24     ` Nicholas Piggin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170314092349.10981-5-npiggin@gmail.com \
    --to=npiggin@gmail.com \
    --cc=ego@linux.vnet.ibm.com \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=svaidy@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).